• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.86-89
• /
• 2000

In this paper, we consider a fuzzy system representation for polynomials of two variables. The representation we use is an exact transformation of the corresponding cubic spline interpolation function. We examine some of the properties of their fuzzy rule tables md prove that the rule table is symmetric or antisymmetric depending on whether the polynomial is symmetric or antisymmetric. A few examples are included to verify our proof. These results not only provide some insights on properties of the cubic spline interpolation coefficients but also provide some help in setting up fuzzy rule tables for functions of two variables.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.399-404
• /
• 2013

This article proposes a digital image correlation (DIC) strain measurement method based on a finite element (FE) algorithm. A two-step digital image correlation is presented. In the first step, the gradient-based subpixels technique is used to search the displacements of a region of interest of the specimen, and then the strain fields are obtained by utilizing the finite element method in the second step. Both simulation and experiment processing, including tensile strain deformation, show that the proposed method can achieve nearly the same accuracy as the cubic spline interpolation method in most cases and higher accuracy in some cases, such as the simulations of uniaxial tension with and without noise. The results show that it also has a good noise-robustness. Finally, this method is used in the uniaxial tensile testing for Dahurian Larch wood specimens with or without a hole, and the obtained strain values are close to the results which were obtained from the strain gauge and the cubic spline interpolation method.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.47-54
• /
• 2019

This study is concerned with the mechanism and structure of an optical microscope and an automatic multi-focus algorithm for automatically selecting sharp images from multiple foci of a cell. To obtain precise cell images quickly, a z-axis actuator with a resolution of $0.1{\mu}m$ was designed to control an optical microscope Moreover, a lighting control system was constructed to select the color and brightness of light that best suit the object being viewed. Cell images are captured by the instrument and the sharpness of each image is determined using Gaussian and Laplacian filters. Next, cubic spline interpolation and peak detection algorithms are applied to automatically find the most vivid points among multiple images of a single object. A cancer cell imaging experiment using propidium iodide staining confirmed that a sharp multipoint image can be obtained using this microscope. The proposed system is expected to save time and effort required to extract suitable cell images and increase the convenience of cell analysis.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.97-108
• /
• 2005

In this paper a method of reconstructing a desired image through the geometrical transformation and the interpolation techniques is presented by comparing different interpolation schemes. Several different interpolation schemes are compared with respect to the amount of error that is the difference between the original and the reverse-projective transformed images. Higher ordered B-spline interpolation turned to be superior to other techniques in reconstructing the image which is desired to be close to the unskewed image as much as possible. In the results, this paper demonstrates that the reverse projection using the higher ordered B-spline interpolation is superior to those conventional interpolation methods, linear, cubic spline for reconstructing image. In experiments, the error decreases as the order of B-spline increases. The proposed technique is useful for various practical and theoretical applications in the area of satellite, medical, and commercial image processing.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.676-687
• /
• 2015

Path planning algorithms are used to allow mobile robots to avoid obstacles and find ways from a start point to a target point. The general path planning algorithm focused on constructing of collision free path. However, a high continuous path can make smooth and efficiently movements. To improve the continuity of the path, the searched waypoints are connected by the proposed polynomial interpolation. The existing polynomial interpolation methods connect two points. In this paper, point groups are created with three points. The point groups have each polynomial. Polynomials are made by matching the differential values and simple matrix calculation. Membership functions are used to distribute the weight of each polynomial at overlapped sections. As a result, the path has $G^2$ continuity. In addition, the proposed method can analyze path numerically to obtain curvature and heading angle. Moreover, it does not require complex calculation and databases to save the created path.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1955-1960
• /
• 2016

Currently, with the rapid development in digital era, the image equipment related to multi-media is becoming commercialized. However, in the process of transmitting image data, deterioration occurs due to various causes, and the most representative deterioration is salt and pepper noise. There are many methods of eliminating salt and pepper noise such as SWMF, RSIF, MNRF, which are rather insufficient in eliminating noise in high-density slat and pepper noise environment. Therefore, in order to eliminate salt and pepper noise, this thesis proposes an algorithm by first judging the noise, and when the center pixel value is non-noise, the original pixel is preserved, and when it is noise, the partial mask is subdivided into 4 directions to apply cubic spline interpolation to the direction with most non-noise pixels. Also, for the objective judgement, it was compared to existing methods, and the PSNR(peak signal to nise ratio) was set as the judgement standard.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.495-508
• /
• 2005

Moving objects are spatiotemporal data that change their location or shape continuously over time. Their location coordinates are periodically measured and stored i3l the application systems. The linear function is mainly used to estimate the location information that is not in the system at the query time point. However, a new method is needed to improve uncertainties of the location representation, because the location estimation by linear function induces the estimation error. This paper proposes an application method of the cubic spline interpolation in order to reduce deviation of the location estimation by linear function. First, we define location information of the moving object on the two-dimensional space. Next, we apply the cubic spline interpolation to location estimation of the proposed data model and describe algorithm of the estimation operation. Finally, the precision of this estimation operation model is experimented. The experimentation comes out more accurate results than the method by linear function.

• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.142-150
• /
• 2003

To construct the extrusion die surface, a B-Spline surface scheme based on the cubic B-Spline curve interpolation method is proposed in the present work. The inlet and outlet profiles are described with B-Spline curves by using the centripetal method for uniform parameterization. The interior control points of surface are generated using the derivative characteristics of B-Spline curve. A complete B-Spline surface is constructed by using appropriate coordinate transformation and knot deletion. In the present study, a quantitative measure for the control of surface is suggested by introducing the tangential vector and inclination angles at the inlet and outlet sections. To verify the validity of the proposed method, automatic surface generation is carried out for the various types of extrusion die surface.

• Earthquakes and Structures
• /
• v.2 no.4
• /
• pp.323-336
• /
• 2011

The problem of reconstruction of complete building response from a limited number of response measurements is considered. The response at the intermediate degrees of freedom is reconstructed by using piecewise cubic Hermite polynomial interpolation in time domain. The piecewise cubic Hermite polynomial interpolation is preferred over the spline interpolation due to its trend preserving character. It has been shown that factorization of response data in variable separable form via singular value decomposition can be used to derive the complete set of normal modes of the structural system. The time domain principal components can be used to derive empirical transfer functions from which the natural frequencies of the structural system can be identified by peak-picking technique. A reduced-rank approximation for the system flexibility matrix can be readily constructed from the identified mass-orthonormal mode shapes and natural frequencies.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.722-727
• /
• 2010

This paper is presented to study simplification of face image using cubic spline interpolation for a business card with 2D barcode. People often forget business card's owner because business cards don't be included a face picture generally. To solve such problem, many applications have be developed through mobile devices, Internet and so on. But they couldn't caught up with value of existing business card mad by paper. Hence, some methods which can put information on business card using 1D or 2D barcode had suggested. but they couldn't include information like face image or company logo image which have too much data. Therefore, we study the simplification method of face image to encode from a face image to 2D barcode. The simplification method using spline curves defined by feature points which we dotted on face, ears, hair, eyebrows, nose, lips, neck, etc.. on a face area. for experiment, we see real face image and simplified face image made by proposed method after we automatically extract face watch through camera. In experimental results, data of simplified face image was reduced as small as it can be expressed by 2D barcode, and confirmed that it can effectively express features.