• 공업화학
• /
• 제29권6호
• /
• pp.782-788
• /
• 2018

서브 미크론 구리-은 코어-쉘 Cu@Ag 입자를 초음파화학과 결합된 금속교환 반응으로 합성하고 인쇄용 전자부품을 위한 저렴한 전도성 페이스트 적용을 평가하였다. 코어-쉘의 합성을 위한 반응에서 코어로 사용된 $Cu_2O/Cu$ 복합체의 $Cu_2O$는 초음파화학 반응으로 Cu로 환원되고 Cu 원자는 Ag의 금속교환 반응의 환원제로 작용하여 코어 표면에 Ag가 코팅된 코어-쉘 구조를 얻었다. TEM-EDS와 TG-DSC를 이용하여 서브 미크론 입자의 코어-쉘 구조를 확인하였다. 70 wt% Cu@Ag를 용매에 분산시킨 전도성 페이스트를 결합제와 습윤제를 사용하여 제조하고, 스크린 인쇄법을 사용하여 폴리아미드 필름상에 코팅하였다. Ag 함량이 8 at%와 16 at%인 Cu@Ag 입자를 함유하는 인쇄된 페이스트 필름은 공기 중의 $180^{\circ}C$에서 소결한 후 각각 96.2와 $38.4{\mu}{\Omega}cm$의 낮은 비저항 값을 나타내었다.

• 한국결정성장학회지
• /
• 제15권5호
• /
• pp.193-197
• /
• 2005

층상 구조의 유기-무기 복합 소재 $Cu_2(OH)_3(CH_3COO){\cdot}H_2O$를 전구체로 사용하여 CuO를 합성하였다. 외부의 다른 유기화합물 주형이 없이 단순한 $Cu_2(OH)_3(CH_3COO){\cdot}H_2O$의 열분해 방법을 사용하였다 이 방법은 저렴한 가격으로 단일 결정의 CuO 입자를 양산하는 방법을 제공한다 응집된 CuO 입자의 형태는 전구체의 구조에 크게 영향을 받는다.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.125-133
• /
• 2016

도전 페이스트의 필러로 사용되기 위한 미세 Cu 입자를 제조하기 위하여 아산화동 분말과 황산간의 고속 화학 반응을 이용한 증류수 기반의 습식 공정으로 Cu 입자의 합성을 실시하였다. $7^{\circ}C$에서 48%의 황산과 30 g의 $Cu_2O$를 사용한 조건에서 미반응 $Cu_2O$ 입자들이 제거되면서 입자들간의 응집이 개선된 순수 Cu 나노입자들이 제조되었다. 이후 최적 첨가제의 선택을 통하여 입자들간의 응집이 가장 억제된 224 nm 크기의 Cu 입자들을 제조할 수 있었다. 이러한 미세 Cu 입자 시료에서는 응집된 형태의 조대 입자들이 다소 존재하였고 입자들간의 연결부도 일부 관찰되었으나, 삼본밀을 사용한 레진 포물레이션과의 혼합 후에는 응집된 형태의 조대 입자들이 파괴되고 입자들간의 연결부들이 탈착되어 입자들의 응집이 풀리는 거동을 관찰할 수 있었다.

• 수산해양기술연구
• /
• 제53권2호
• /
• pp.204-209
• /
• 2017

In order to use PUR/CuO Composites as the sealing materials for ships equipment, this research has been performed. PUR/CuO composites are produced by using ultrasonic waves. The increase of CuO leads to increase in the tensile strength and shore hardness. The cumulative wear volume shows a tendency to increase in proportional to sliding distance. As the CuO particles of these composites indicated, the friction coefficient was slightly increased. The major failure mechanisms were lapping layers, deformation of matrix, plowing, debonding of particles and microcracking by scanning electric microscopy photograph of the wear tested surface.

• 대한금속재료학회지
• /
• 제47권9호
• /
• pp.597-603
• /
• 2009

The hydrogen reduction behavior of ultrasonic ball-milled $WO_3-CuO$ nanopowder, which is highly related with micro-pore structure, was investigated by thermogravimetry(TG) and hygrometry system. EDS and TEM results represented that the ultrasonic ball-milled $WO_3-CuO$ nanopowder consisted of the agglomerates which was confirmed as a homogeneous mixture of $WO_3$ and CuO particles. It was found that the reduction reaction of CuO was retarded by initial micro-pores which are smaller than 40 nm in the ultrasonic ball-milled $WO_3-CuO$ nanopowder. The earlier agglomeration of Cu particles at comparably low temperature decreased the volume of micro-pores in the $WO_3-CuO$ nanopowder which caused the retardation of $WO_3$ reduction reaction. These results clearly explain that the micro-pore structure significantly affected the reduction reaction of $WO_3$ and CuO in the $WO_3-CuO$ nanopowder.

• 한국결정성장학회지
• /
• 제16권4호
• /
• pp.166-171
• /
• 2006

층상 구조의 유기-무기 복합 소재 $Cu_2(OH)_3(CH_3COO){\cdot}H_2O$에 마이크로파를 조사하면서 $Cu_2O$와 Cu를 합성하였다. 에틸렌 글리콜에서는 $Cu_2(OH)_3(CH_3COO){\cdot}H_2O$이 환원이 되어서 Cu금속이 형성되는 반면에, 수용액에 글루코오스를 넣으면$Cu_2(OH)_3(CH_3COO){\cdot}H_2O$이 환원이 되어 $Cu_2O$가 형성되었다. 마이크로파 조사시간과 글루코오스의 농도가 $Cu_2O$의 입자의 생성과 성장에 미치는 영향을 확인하였다. 마이크로파의 조사시간이 길어질수록 $Cu_2O$의 입자는 수 ${\mu}m$의 구형에서 40nm의 지름을 가진 나노 선으로 변함을 확인하였다.

• 한국분말재료학회지
• /
• 제7권4호
• /
• pp.205-211
• /
• 2000

Distribution of $Y_2BaCuO_5$ (211) Particles within $YBa_2Cu_3O_{7-x}/$ (123) grains of melt infiltration processed YBCO oxides was investigated. Processing parameters were a temperature, atmosphere (air and $O_2$) and initial 211 size. The 211 particles were distributed randomly within the 123 grains when the initial 211 size was large, while they made x-like pattern and/or butterfly-like patterns when the 211 size was small. The 211 patterns were more clearly observed in the samples prepared at higher temperatures and under $O_2$ atmosphere. The 211 distribution was explained in terms of the interfacial energy relationship among the solid, particle and melt.

• 한국분말재료학회지
• /
• 제7권3호
• /
• pp.149-153
• /
• 2000

In this study, the fabrication of $Al_2O_3$/5vol.%Cu nanocomposite and its mechanical property were discussed. The nanocomposite powders were produced by high energy ball milling of $Al_2O_3$ and Cu elemental powders. The ball-milled powders were sintered with Pulse Electric Current Sintering (PECS) facility. The relative densities of specimens sintered at $1200^{\circ}C$ and $1250^{\circ}C$ after soaking process at $900^{\circ}C$ were 96% and over 97%, respectively. The sintered microstructures were composed of $Al_2O_3$ matrix and the nano-sized Cu particles distributed on grain boundaries of $Al_2O_3$ matrix. The nanocomposite exhibited the enhanced fracture toughness compared with general monolithic $Al_2O_3$. The toughness increase was explained by the crack deflection and bridging by dispersed Cu particles.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.886-896
• /
• 1997

To investigate an effect of phase separation on precipitation characteristics of CuCl nanocrystals in CuCl doped nonlinear optical glasses, borosilicate glass systems with 9 different compositions with ~2wt% of CuCl were selected and CuCl doped glasses were prepared by melting and precipitation method. Microstructural properties of the CuCl doped glasses were analyzed by optical absorption spectroscopy, acid elution test, TEM, and EDXS. While phase separation did not occur in Glass A~D, interconnected and droplet microstructures due to phase separation were found in Glass E, F and Glass G~I, respectively. In the particular composition of the matrix glasses in this study, the precipitation of the CuCl particles was observed in the phase separable glasses, not in phase non-separable glasses. The CuCl particles were precipitated in both silica-rich phase region and boronrich phase region of the glass matrix. In the case of 7.7Na2O-36.6B2O3-52.7SiO2(mole%) glass, the larger CuCl particles than those in the silica-rich phase region were observed in the boron-rich phase region.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.16-20
• /
• 2014

In order to fabricate the porous $Al_2O_3$ with dispersion of nano-sized Cu particles, freeze-drying of camphene/$Al_2O_3$ slurry and solution chemistry process using Cu-nitrate are introduced. Camphene slurries with 10 vol% $Al_2O_3$ was frozen at $-25^{\circ}C$. Pores were generated by sublimation of the camphene during drying in air. The sintered samples at 1400 and $1500^{\circ}C$ showed the same size of large pores which were aligned parallel to the sublimable vehicles growth direction. However, the size of fine pores in the internal walls of large pores decreased with increase in sintering temperature. It was shown that Cu particles with the size of 100 nm were homogeneously dispersed on the surfaces of the large pores. Antibacterial test using fungus revealed that the porous $Al_2O_3$/1 vol% Cu composite showed antifungal property due to the dispersion of Cu particles. The results are suggested that the porous composites with required pore characteristics and functional property can be fabricated by freeze-drying process and addition of functional nano particles by chemical method.