• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.14-23
• /
• 2006

Wireless Sensor Network(WSN) consists of huge number of sensor nodes which are small and inexpensive with very limited resources. The public key cryptography is undesirable to be used in WSN because of the limitations of the resources. A key management and predistribution techniques are required to apply the symmetric key cryptography in such a big network. Many key predistribution techniques and approaches have been proposed, but most of-them didn't consider the real WSN assumptions, In this paper, we propose a security framework that is based on a hierarchical grid for WSN considering the proper assumptions of the communication traffic and required connectivity. We apply simple keying material distribution scheme to measure the value of our framework. Finally, we provide security analysis for possible security threats in WSN.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.58-67
• /
• 2019

A design of an elliptic curve cryptography (ECC) processor that supports both pseudo-random curves and Koblitz curves over $GF(2^m)$ defined by the NIST standard is described in this paper. A finite field arithmetic circuit based on a word-based Montgomery multiplier was designed to support five key lengths using a datapath of fixed size, as well as to achieve a lightweight hardware implementation. In addition, Lopez-Dahab's coordinate system was adopted to remove the finite field division operation. The ECC processor was implemented in the FPGA verification platform and the hardware operation was verified by Elliptic Curve Diffie-Hellman (ECDH) key exchange protocol operation. The ECC processor that was synthesized with a 180-nm CMOS cell library occupied 10,674 gate equivalents (GEs) and a dual-port RAM of 9 kbits, and the maximum clock frequency was estimated at 154 MHz. The scalar multiplication operation over the 223-bit pseudo-random elliptic curve takes 1,112,221 clock cycles and has a throughput of 32.3 kbps.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.961-968
• /
• 2020

This paper describes a design of high performance modular multiplier that is essentially used for elliptic curve cryptography. Our modular multiplier supports modular multiplications for five field sizes over GF(p), including 192, 224, 256, 384 and 521 bits as defined in NIST FIPS 186-2, and it calculates modular multiplication in two steps with integer multiplication and reduction. The Karatsuba-Ofman multiplication algorithm was used for fast integer multiplication, and the Lazy reduction algorithm was adopted for reduction operation. In addition, the Nikhilam division algorithm was used for the division operation included in the Lazy reduction. The division operation is performed only once for a given modulo value, and it was designed to skip division operation when continuous modular multiplications with the same modulo value are calculated. It was estimated that our modular multiplier can perform 6.4 million modular multiplications per second when operating at a clock frequency of 32 MHz. It occupied 456,400 gate equivalents (GEs), and the estimated clock frequency was 67 MHz when synthesized with a 180-nm CMOS cell library.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.463-471
• /
• 2021

Since 2016, National Institute of Standards and Technology (NIST) has been conducting a post quantum cryptography standardization project in preparation for a quantum computing environment. Three rounds are currently in progress, and most of the candidates (5/7) are lattice-based. Lattice-based post quantum cryptography is evaluated to be applicable even in an embedded environment where resources are limited by providing efficient operation processing and appropriate key length. Among them, SABER KEM provides the efficient modulus and Toom-Cook to process polynomial multiplication with computation-intensive tasks. In this paper, we present the optimized implementation of evaluation and interpolation in Toom-Cook algorithm of SABER utilizing ARM/NEON in ARMv8-A platform. In the evaluation process, we propose an efficient interleaving method of ARM/NEON, and in the interpolation process, we introduce an optimized implementation methodology applicable in various embedded environments. As a result, the proposed implementation achieved 3.5 times faster performance in the evaluation process and 5 times faster in the interpolation process than the previous reference implementation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.419-426
• /
• 2021

A high-performance elliptic curve cryptography processor (HP-ECCP) was designed to support five field sizes of 192, 224, 256, 384 and 521 bits over GF(p) defined in NIST FIPS 186-2, and it provides eight modes of arithmetic operations including ECPSM, ECPA, ECPD, MA, MS, MM, MI and MD. In order to make the HP-ECCP resistant to side-channel attacks, a modified left-to-right binary algorithm was used, in which point addition and point doubling operations are uniformly performed regardless of the Hamming weight of private key used for ECPSM. In addition, Karatsuba-Ofman multiplication algorithm (KOMA), Lazy reduction and Nikhilam division algorithms were adopted for designing high-performance modular multiplier that is the core arithmetic block for elliptic curve point operations. The HP-ECCP synthesized using a 180-nm CMOS cell library occupied 620,846 gate equivalents with a clock frequency of 67 MHz, and it was evaluated that an ECPSM with a field size of 256 bits can be computed 2,200 times per second.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1882-1889
• /
• 2021

This paper describes a high-performance hardware implementation of modular multiplication used as a core operation in elliptic curve cryptography. A 521-bit high-performance modular multiplier for NIST P-521 curve was designed by adopting 3-way Toom-Cook integer multiplication and fast reduction algorithm. Considering the property of the 3-way Toom-Cook algorithm in which the result of integer multiplication is multiplied by 1/3, modular multiplication was implemented on the Toom-Cook domain where the operands were multiplied by 3. The modular multiplier was implemented in the xczu7ev FPGA device to verify its hardware operation, and hardware resources of 69,958 LUTs, 4,991 flip-flops, and 101 DSP blocks were used. The maximum operating frequency on the Zynq7 FPGA device was 50 MHz, and it was estimated that about 4.16 million modular multiplications per second could be achieved.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.1
• /
• pp.33-43
• /
• 2023

The National Institute of Standards and Technology (NIST), which is working on the Post-Quantum Cryptography (PQC) standardization project, announced four algorithms that have been finalized for standardization. In this paper, we demonstrate through experiments that private keys can be exposed by Correlation Power Analysis (CPA) and Differential Deep Learning Analysis (DDLA) attacks on polynomial coefficient-wise multiplication algorithms that operate in the process of generating signatures using CRYSTALS-Dilithium algorithm. As a result of the experiment on ARM-Cortex-M4, we succeeded in recovering the private key coefficient using CPA or DDLA attacks. In particular, when StandardScaler preprocessing and continuous wavelet transform applied power traces were used in the DDLA attack, the minimum number of power traces required for attacks is reduced and the Normalized Maximum Margines (NMM) value increased by about 3 times. Conseqently, the proposed methods significantly improves the attack performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2178-2181
• /
• 2003

Active networks allow active node’s functionality to be extended dynamically through the use of active extensions. This flexible architecture facilitates the deployment of new network protocols and services. However, the active nature of a network also raises serious safety and security concerns. These concerns must be addressed before active networks can be deployed. In this paper we look at how we can control active extension’s access to different active nodes. Specifically, the authentication between active nodes is very important in this case. We use unique identity each node has for transferring access policies between active nodes. In this paper, we suggest a new method of transferring access policies performing authentications using identities between active nodes.

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.197-212
• /
• 1999

In general, the electronic commerce systems comprise the background system, terminal, network and smart cards. Among them, the smart card systems are expected to take a great portion of applications for the convenience of rapidly improving technology. The technology includes adopting RISC processors or co-processors for cryptography and developing new memory systems based on the standardization. In this paper, we investigate the overall trends of the technology and the standardization process of smart cards. We also propose the guidelines to enhance the capabilities of designing H/W and S/W related to COS(Chip Operating System).

• Journal of Information Technology Services
• /
• v.11 no.2
• /
• pp.119-130
• /
• 2012

Nowadays, encryption is core technology widely used in IT industry to protect private information of individuals and important intellectual assets of companies. However, when criminals and terror suspects abuse such technology, national security can be threatened and law enforcement can be disturbed. To prevent such adverse effects of cryptography, some nations have enacted legislations that allow legally obtained encrypted data to be decrypted by certain law enforcement agencies. Hence it is imperative that firms having international presence understand and comply by each nation's regulations on decryption order. This paper explains circumstances under which legislations on decryption order were established, organizes countries with regulations and punishment, explores what global enterprises need to consider in making policies to effectively respond to decryption orders, and suggests that technological methods and managerial guidelines for control of encryption be established.