• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.891-895
• /
• 2005

Novel structure ultrasonic motors which have cross type stator were designed and fabricated. Driving characteristics of the motors were analyzed and measured by changing the materials of the stator. This ultrasonic motor has stator with hollowed cross bar and the stator rotate the rotor using elliptical displacement of the inside tips. This motion is generated by lateral vibration mode of cross bars. This stator was analyzed by finite element analysis depandent on stator's materials. And the cross type ultrasonic motors were made by analyzed results. The larger displacements were obtained, when the density of material was decreased. But the stress was increased when the stator's material has large density and Young's modulus. The fabricated one has high speed and torque in large stress on contact point between rotor and stator. The stress was more effected on speed and torque than the displacement.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.977-984
• /
• 2012

The cross-correlation technique has been widely used for leakage detection of buried pipes, and this technique can be successfully applied when the leakage signal has a high signal-to-noise ratio. In the case of a power plant, the measured leakage signals obtained from the sensors may contain background noise and mechanical noise generated by adjacent machinery. In such a case, the conventional method using the cross-correlation function may fail to estimate the leakage point. In order to enhance the leakage estimation capability of a buried pipe in a noisy environment, an improved cross-correlation technique is proposed. It uses a noise rejection technique in the frequency domain to effectively eliminate the tonal noise due to rotating machinery. Experiments were carried out to verify the validity of the proposed method. The results show that even in a tonal noisy environment, the proposed method can provide more reliable means for estimating the time delay of the leakage signals.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.17 no.1
• /
• pp.11-18
• /
• 1980

In the conventional ship's structures, the stiffeners with asymmetric sections have been widely used, in spite of the disadvantage on the point of strength, compared to those with symmetric sections. So far, the stiffened plating was usually analyzed not considering the geometric unsymmetry characteristics of the section, including only the cross sectional area and moment of inertia. In this paper, the stiffened plating is devided into the strips having a thin-walled open cross section by using the concept of the effective width. The geometric characteristics of the sections are also included. The governing equations are derived, which can be applied to the arbitrary cross section beams, and the symmetric and the asymmetric section beams which have the same cross sectional areas are analyzed by using the finite element method. From that result, we obtain the allowable load of the two sections, and compared them.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1754-1757
• /
• 2006

Recently many firms operate a cross-docking center in addition to run a distribution center to reduce logistics costs and maintain or enhance logistics service. However, it is true that many firms just operate their cross-docking centers as they are without any change, in spite of that the location of the cross-docking center should be changed and operated when the location of distribution center is changed and moved. This study presents the method that re-selects the location of the cross-docking center when the existing distribution center is changed. Describing the operation environment to apply the cross-docking system and the selection criteria of the cross-docking center under the environment of changeable logistics network, we define the simulation model which can analyze and select the location of the cross-docking center applied to a logistics field. The simulation model presents experiential algorithm selecting the location with the data of the demand point such as volume, transportation costs, and delivery distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.581-590
• /
• 2003

This paper proposes the routing path selection mechanism for source routing-based PtMP (Point-to-Multipoint) call in ATM switching system. Especially, it suggests PtMP routing path selection method that can share the maximum resource prior to the optimal path selection, guarantee the reduction of path calculation time and cycle prevention. The searching for the nearest branch point from destination node to make the maximum share of resource is the purpose of this algorithm. Therefore among neighbor nodes from destination node by back-tracking, this algorithm fixes the node crossing first the node on existing path having the same Call ID as branch node, constructs the optimal PtMP routing path. The optimal node to be selected by back-tracking is selected by the use of Dijkstra algorithm. That is to say, PtMP routing path selection performs the step of cross node selection among neighboring nodes by back-tracking and the step of optimal node selection(optimal path calculation) among neighboring nodes by back-tracking. This technique reduces the process of search of routing information table for path selection and path calculation, also solves the cycle prevention easily during path establishment.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.247-254
• /
• 2010

Two-spotted spider mite, Tetranychus urticae was collected from the rose greenhouse in Chilgok, Gyeongbuk Province in December 2000. This population has been selected for ten years with bifenazate (over 450 times), and increased 855.9 fold in resistance as compared with susceptible strain (S). Cross resistance of bifenazate resistant (BR) strain to eight miticides was investigated. The BR strain exhibited high and low cross resistance to acequinocyl (614.0 fold) and to chlorfenapyr (9.1 fold), respectively. Against fenazaquin (0.3 fold) and fenpyroximate (0.1 fold), however, showed the strain negatively correlated cross resistance. Each strain collected in Choeng-ju (CJ), Kang-jin (KJ), and Chung-ju (CUJ) showed 5.5-, 964.5-, and 21.8-fold resistance to bifenazate, respectively. The detoxifying enzymes of the BR strain showed 1.6-fold activity in cytochrome $P_{450}$-dependent monooxygenase ($P_{450}$) as compared with susceptible one. By comparing the mitochondrial cytochrome b (cytb) sequence, G126S point mutation was detected in the BR and KJ strains.

• The Journal of the Korean dental association
• /
• v.10 no.12
• /
• pp.831-834
• /
• 1972

The authors have measured and analyzed the values of Point C from roentgenocephalograms of Korean adults, 51 males and 53 females, with normal occlusion. The results were as follows. 1. The position of Point C was -4.73mm. in male and -4.74mm. in female. 2. In samples of harmonious maxillary and mandibular basal bones, the position of Point C was -4.02mm. in male, while that was -5.33mm. in female, respectively. 3. When N.F.-M.P.A. was become larger, the position of Point C was moved more upward; while M.R.P. was increased larger, it was moved more downward. 4. The position of Point C was depended on the distance form the cross point with nasal floor and mandibular plane to the points A and B.

• International Journal of Computer Science & Network Security
• /
• v.24 no.8
• /
• pp.205-213
• /
• 2024

As the Restaurant industry is growing rapidly. The demand for an effortless POS (Point Of Sale) system which can make management easy is increasing. So, the purpose of this study is to digitalise the growing industry of restaurants and its consumers by utilizing cross-platform development. Crossplatform development frameworks provide great opportunities to solve the issues of handling ubiquitous devices with minimum efforts to reduce the cost and increase the stability, accessibility of the end consumers. By availing those opportunities, an Integrated POS system with cross platform is proposed. This integrated cross-platform POS system is originally designed for a single restaurant managed by its own private cloud server. This research solves the 2 major problems. One of them is the accessibility of the system on modern devices without even writing platform-specific code with the help of cross-platform development. This included web, mobile, desktops & tablets at the same time with the same codebase. Second one is handling data consistency with ubiquitous devices with the help of cloud infrastructure to make data safe and consistent more than ever. In the Development of this system Dart will be used as the primary programming language for cross-platform development. On the Cloud server system apache will be used as the web server and PHP as server side language. System will be using MySQL as the database server.

• Archives of Plastic Surgery
• /
• v.39 no.6
• /
• pp.637-642
• /
• 2012

Background Fingertip injuries involving subtotal or total loss of the digital pulp are common types of hand injuries and require reconstruction that is able to provide stable padding and sensory recovery. There are various techniques used for reconstruction of fingertip injuries, but the most effective method is functionally and aesthetically controversial. Despite some disadvantages, cross-finger pulp flap is a relatively simple procedure without significant complications or requiring special techniques. Methods This study included 90 patients with fingertip defects who underwent cross-finger pulp flap between September 1998 and March 2010. In 69 cases, neurorrhaphy was performed between the pulp branch from the proper digital nerve and the recipient's sensory nerve for good sensibility of the injured fingertip. In order to evaluate the outcome of our surgical method, we observed two-point discrimination in the early (3 months) and late (12 to 40 months) postoperative periods. Results Most of the cases had cosmetically and functionally acceptable outcomes. The average defect size was $1.7{\times}1.5$ cm. Sensory return began 3 months after flap application. The two-point discrimination was measured at 4.6 mm (range, 3 to 6 mm) in our method and 7.2 mm (range, 4 to 9 mm) in non-innervated cross-finger pulp flaps. Conclusions The innervated cross-finger pulp flap is a safe and reliable procedure for lateral oblique, volar oblique, and transverse fingertip amputations. Our procedure is simple to perform under local anesthesia, and is able to provide both mechanical stability and sensory recovery. We recommend this method for reconstruction of fingertip injuries.

• Journal of Environmental Science International
• /
• v.24 no.4
• /
• pp.371-381
• /
• 2015

In the mountain streams in Jeju Island, strong turbulence and roughness usually made it nearly impossible to utilize most of intrusive instrumentation for streamflow discharge measurements. Instead, a non-intrusive fixed electro-magnetic wave surface velocimetry (fixed EWSV: Kalesto) became alternatively popular in many representative streams to measure stream discharge seamlessly. Currently, Kalesto has shown noteworthy performance with little loss in flood discharge measurements and also has successfully provided discharge for every minute. However, Kalesto has been operated to regard its measured one-point velocity as the representative mean velocity for the given cross-section. Therefore, it could be highly possible to potentially encompass discharge measurements errors. In this study, we analyzed the difference between such Kalesto discharge measurements and other alternative concurrent discharge measurements such as Acoustic Doppler Current Profiler (ADCP) and mobile EWSV which were able to measure velocity in multi-points in the cross-section. Consequently, Kalesto discharge deviated from ADCP discharge in amount of 48% for relatively low flow, and more than 20% difference for high flow compared with mobile EWSV discharge measurements. These results indicated that the one-point velocity measured by Kalesto should be used as a cross-sectional mean velocity, rather it should be accounted for as an index-velocity in conjunction with directly measured cross-sectional mean velocity by using more reliable instrumentations. After inducing Kalesto Discharge Correction Coefficient (KDCC) that actually means relationship between index velocity and cross-sectional mean velocity, the corrected discharge from Kalesto was significantly improved. Therefore, we found that index velocity method should be applied to obtain better accuracy of discharge measurement in case of Kalesto operation.