• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.4
• /
• pp.7-12
• /
• 1988

The Resistance Committee of Korea Towing Tank Conference extended the Cooperative Experimental Study Program(1985)[1] to perform the geosim tests by exchanging the five different scaled Series 60, $C_B=0.60$ models between the participating organizations and 13 sets of resistance data have been obtained. The test results are compared among the participating towing tanks and also with the results given in the report of the Resistance and Flow Com-identify the mittee of 18th ITTC. The form factor of each model is derived by Prohaska's method to investigate its dependency on $R_n$. On the other hand, at each $F_n$, form factors are also derived by Telfer's method to relation between $F_n$ and form factor. For this hull form, form factors show relatively weak dependency on $R_n$ and strong dependency on $F_n$. And it is also found that dependencies on both have a cross relation. It seems that further study should be continued to understand more clearly the physical phenomena involved in this problem.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.524-527
• /
• 2009

Spontaneously infected and non-infected dairy cows were assessed in a cross-sectional study aimed at determining whether bovine leukocyte markers may diagnose intra-mammary infections (bovine mastitis). Animals located in herds where bovine mastitis was highly prevalent were investigated (n = 31 animals). The expression of three cell-surface markers (CD11b, CD4 and CD8) was assessed, and the somatic cell count (SCC) and bacteriological analyses (both cultures and PCR tests) were also conducted. Cows identified as infected revealed statistically significant higher milk leukocyte CD11b, CD4 percentage and milk CD4/CD8 ratios than non-infected cows. Immunological markers may diagnose spontaneous bovine mastitis.

• Journal of Life Science
• /
• v.30 no.11
• /
• pp.1007-1011
• /
• 2020

This study was conducted to analyze the genetic diversity and relationships that discriminate between Korean native black goat populations (Dangjin, Jangsu, Tongyoung, and Gyeongsang National University strains) and crossbred goats. Monomorphic single nucleotide polymorphisms (SNPs) in each strain were collected, and 133 common SNPs were selected for analysis. These 133 monomorphic SNPs showed differences in the genetic structure of the Korean native black goat and crossbred goats, and results from the principal component analysis (PCA) showed that the two can be clearly separated. Furthermore, analysis of the validation population comprising 70 individuals (Korean native black goats, n = 24; crossbred goats, n = 46) with the reference population showed that Korean native black goat strains and the reference population have the same genetic structure, and the crossbred goats shared only part of the genetic structure with the reference population. The result of the PCA analysis showed that the Korean native black goat strains form one population, whereas the foreign strains form another population which is more widely dispersed than the Korean native black goat strains. Thus, the results from this study can be used as baseline data for the conservation of genetic resources of Korean native black goat communities through utilization of monomorphic SNPs and for the introduction of exotic species for further improvement in genetic diversity. This study can also help reduce unnecessary inbreeding and gene flow between native strains.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.367-377
• /
• 2015

ADCPs have been highlighted so far for measuring steramflow discharge in terms of their high-order of accuracy, relatively low cost and less field operators driven by their easy in-situ operation. While ADCPs become increasingly dominant in hydrometric area, their actual measurement accuracy for velocity and bathymetry measurement has not been sufficiently validated due to the lack of reliable bench-mark data, and subsequently there are still many uncertain aspects for using ADCPs in the field. This research aimed at analyzing inter-comparison results between ADCP measurements with respect to the detailed ADV measurement in a specified field environment. Overall, 184 ADV points were collected for densely designed grids for the given cross-section that has 6 m of width, 1 m of depth, and 0.7 m/s of averaged mean flow velocity. Concurrently, ADCP fixed-points measurements were conducted for each 0.2m and 0.02m of horizontal and vertical spacing respectively. The inter-comparison results indicated that ADCP matched ADV velocity very accurately for 0.4~0.8 of relative depth (y/h), but noticeable deviation occurred between them in near surface and bottom region. For evaluating the capacity of measuring bathymetry of ADCPs, bottom tracking bathymetry based on oblique beams showed better performance than vertical beam approach, and similar results were shown for fixed and moving-boat method as well. Error analysis for velocity and bathymetry measurements of ADCP can be potentially able to be utilized for the more detailed uncertainty analysis of the ADCP discharge measurement.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.318-328
• /
• 2007

This study was carried out to evaluate the performance of the separate membrane (HF; hollow fiber membrane with polysulfone) process applied with the external membrane types, internal pressure membrane types and external-internal types according to the variations of pressure and membrane pore size in the purification treatment process of the lake water. The maximum permeate flux was average values of 282 LMH and 234 LMH with the pore size of 0.3 and 0.05 ${\mu}m$ respectively in the external pressure membrane process, and 443 LMH and 522 LMH with the pore size of 0.3 and $0.05{\mu}m$ respectively in the internal pressure membrane process. In addition, the maximum permeate flux of the process that was applied with external and internal membrane pressure simultaneously showed the average values of 674 LMH with the pore size of $0.3{\mu}m$, and 648 LMH with the pore size of $0.05{\mu}m$. Therefore, maximum yield per unit area is supposed when the separate membrane that was applied with external and internal pressure simultaneously are used to treat the lake water.

• Journal of the Korean earth science society
• /
• v.23 no.4
• /
• pp.369-379
• /
• 2002

The characteristics of the East Asian summer monsoon circulation associated with the cool and wet summer of 1993 and the warm and dry summer of 1994 are investigated by analyzing the atmospheric circulations features in the upper and lower troposphere and by examining the global SST and associated tropical convective precipitation fields. The negative geopotential height anomalies at 500 hPa and 200 hPa in 1993 over East Asia, the central North Pacific, and the western United States were replaced by positive ones in 1994. In addition, the 200 hPa zonal wind anomaly averaged over the East Asian summer monsoon region is negatively correlated with the Korean summer temperature anomaly. The subtropical jet stream in 1993 was displaced into the central part of Korea well south of its normal position. The western Pacific subtropical high was shifted southward, and the East Asian summer rainfall and temperature was above-normal and below-normal, respectively due to the southwestward extension of a cold and dry polar airmass from the Sea of Okhotsk to the Est Sea. In contrast, the subtropical jet stream in 1994 was displaced well north of its normal position. The abrupt northward shift of the western Pacific subtropical high was accompanied with the rapid northward movement of the rain band of the East Asian summer monsoon rainfall. The anomaly patterns of the East Asia summer rainfall and temperature were opposite to those of 1993. Large sea surface temperature anomalies of opposite signs existed in the tropical Pacific with a mature El $Ni{\~{n}o$ in 1993 and a weak La $Ni{\~{n}a$ condition in 1994. The role of the anomalous convective precipitation in the western Pacific and the Indian Ocean related with the variations in the low-level cross-equatorial flow along the northwestern periphery of the Australian high and the Mascarene high is probably to influence a large-scale atmospheric circulation over the East Asia during both the years.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.552-561
• /
• 2019

In korea, debris-flow disasters are induced by typhoon and localized torrential rainfall annually. These disasters are particularly severe in the Korean national park due to its geomorphological characteristics. This study was conducted to analyze the landslide characteristics and forest environmental factors of landslide areas located in rugged mountain range in the Korean national park (Mt. Seorak, Mt. Jiri, and Mt. Sobaek). Overall, landslides occurred at 474 sites. The average area of the landslide scar among these sites was 1,212 ㎡. The average landslide sediment was 1,389 ㎥, average landslide length was 75 m, and the average width was 12.9 m. The landslides frequently occurred in regions with igneous rock and coniferous forest. In addition, slope gradient degree (31°-40°), slope gradient direction (N), vertical slope (concave), cross slope (concave), altitude (401-800 m), position (middle), stream order (first order), forest type (mixed), parent rock (igneous), and soil depth (<46 cm). The relationship between landslide soil volume and environmental factors showed positive correlation. The variables of vertical slope (complex), altitude (<1,201 m), and soil depth (<46 cm) correlated significantly at 1 % level.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

• IMMUNE NETWORK
• /
• v.7 no.3
• /
• pp.133-140
• /
• 2007

Background: It is well established that cross talk between natural killer (NK) cells and myeloid dendritic cells (DC) leads to NK cell activation and DC maturation. In the present study, we investigated whether type 1-polarized DC (DC1) matured in the presence of IFN-${\gamma}$ and type 2-polarized DC (DC2) matured in the presence of PGE2 can differentially activate NK cells. Methods: In order to generate DC, plastic adherent monocytes were cultured in RPMI 1640 containing GM-CSF and IL-4. At day 6, maturation was induced by culturing the cells for 2 days with cytokines or PGE2 in the presence or absence of LPS. Each population of DC was cocultured with NK cells for 24 h. The antigen expression on DC was analyzed by flow cytometry and cytokine production in culture supernatant was measured by ELISA or a bioassay for TNF-${\alpha}$ determination. NK cell-mediated lysis was determined using a standard 4h chromium release assay. Results: DC2, unlike DC1, had weak, if any, ability to induce NK cell activation as measured by IFN-${\gamma}$ production and cytolytic activity. DC2 were weakly stimulated by activated NK cells compared to DC1. In addition, IFN-${\gamma}$-primed mature DC appeared to be most resistant to active NK cell-mediated lysis even at a high NK cell/DC ratio. On the other hand, PGE2-primed DC were less resistant to feedback regulation by NK cells than IFN-${\gamma}$-primed mature DC. Finally, we showed that the differential effect of two types of DC population on NK cell activity is not due to differences in their ability to form conjugates with NK cells. Conclusion: These results suggest that different combinations of inflammatory mediators differentially affect the effector function of DC and, as a result, the function of NK cells, eventually leading to distinct levels of activation in adaptive immunity.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.276-282
• /
• 2004

Barley flakes were developed by extrusion cooking using broken kernels, by-products of the barley pearling process. Broken kernels from both non-waxy and waxy barley broken kernels were sufficiently gelatinized at the barrel temperature of over $100^{\circ}C$ and the moisture content of broken kernels of over 35%. Cutting and flaking roll separating properties of pellets prepared from non-waxy barley broken kernels were better than those of waxy barley broken kernels. Characteristics of pellets prepared by extrusion cooking in different mixing ratios of non-waxy and waxy barley broken kernels were investigated. As the mixing ratio of waxy barley broken kernels increased, RVA peak viscosity, apparent viscosity, and yield stress of prepared pellets decreased, while flow behavior index increased. As the mixing ratio of waxy barley broken kernels increased, compressive strength and bulk density of deep-fat fried flakes drastically decreased, and the size of air cells on cross-section increased, and thickness of cell-constituting bodies decreased. Sensory evaluation results showed that acceptability for texture and taste of flakes inclosed as the mixing ratio of waxy barley broken kernels increased, and optimum mixing level of waxy barley broken kernels appeared to be 30-40%.