• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.2
• /
• pp.27-34
• /
• 2010

The PERT is one form of probabilistic network and can have many critical paths in the concept of each work has dispersed complete time. Here we propose two operators to estimate the probabilistic complete time about serial and parallel connections, and in each junction node, probability of critical path is estimated by new operator. Then we compare the estimated results with robability of critical path with deterministic CPM and Monte Carlo simulation (MCS). Our results show that all paths in PERT can be critical path, and proposed operators are efficient and accurate probabilistic calculators compare MCS result.

• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.765-778
• /
• 2023

This study investigates the free vibration and buckling analyses of isotropic curved plate structures fixed at all ends. The Kirchhoff-Love Plate Theory (KLPT) and Finite Element Method (FEM) are employed to model the curved structure. In order to perform the finite element analysis, a four-node quadrilateral element with 5 degrees of freedom (DOF) at each node is utilized. Additionally, the drilling effect (θ_z) is considered as minimal to satisfy the DOF of the structure. Lagrange's equation of motion is used in order to obtain the first ten natural frequencies and the critical buckling values of the structure. The effects of various radii of curvatures and aspect ratio on the natural frequency and critical buckling load values for the single-bay and two-bay curved frames are investigated within this scope. A computer code based on finite element analysis is developed to perform free vibration and buckling analysis of curved plate frames. The natural frequency and critical buckling load values of the present study are compared with ANSYS R18.2 results. It has been concluded that the results of the present study are in good agreement with ANSYS results for different radii of curvatures and aspect ratio values of both single-bay and two-bay structures.

• Advanced Industrial SCIence
• /
• v.3 no.1
• /
• pp.30-36
• /
• 2024

Recently, the Internet of Things (IoT), which has been applied to various industrial fields, is constantly evolving in the process of automation and digitization. However, in the network where IoT devices are built, research on IoT critical information-related data sharing, personal information protection, and data integrity among intermediate nodes is still being actively studied. In this study, we propose a blockchain-based IoT critical information management technique that is easy to implement without burdening the intermediate node in the network environment where IoT is built. The proposed technique allocates a random value of a random size to the IoT critical information arriving at the intermediate node and manages it to become a decentralized P2P blockchain. In addition, the proposed technique makes it easier to manage IoT critical data by creating licenses such as time limit and device limitation according to the weight condition of IoT critical information. Performance evaluation and proposed techniques have improved delay time and processing time by 7.6% and 10.1% on average compared to existing techniques.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.1063-1079
• /
• 2010

Vehicle ad hoc networks (VANET) are one of the most important technologies to provide various ITS services. While VANET requires rapid and reliable transmission, packet transmission in VANET is unstable because of high mobility. Many routing protocols have been proposed and assessed to improve the efficiency of VANET. However, topology-based routing protocols generate heavy overhead and long delay, and position-based routing protocols have frequent packet loss due to inaccurate node position. In this paper, we propose a position-based routing repair algorithm to improve the efficiency of VANET. This algorithm is proposed based on the premise that AODV (-PGB) can be used effectively in VANET, if the discovery, maintenance and repair mechanism of AODV is optimized for the features of VANET. The main focus of this algorithm is that the relay node can determine whether its alternative node exits and judge whether the routing path is disconnected. If the relay node is about to swerve from the routing path in a multi-hop network, the node recognizes the possibility of path loss based on a defined critical domain. The node then transmits a handover packet to the next hop node, alternative nodes and previous node. The next node repairs the alternative path before path loss occurs to maintain connectivity and provide seamless service. We simulated protocols using both the ideal traffic model and the realistic traffic model to assess the proposed algorithm. The result shows that the protocols that include the proposed algorithm have fewer path losses, lower overhead, shorter delay and higher data throughput compared with other protocols in VANET.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.276-287
• /
• 2004

An ad hoc network is infra(Base Sstation or Access Point) free wireless mobile communication technology. Mobile nodes function as routers and servers in ad hoc networks. Many routing protocols for ad hoc network have been proposed. If any route is broken owing to moving node, source must repair broken route again. But route repair technology after route collapses is not suitable to transmit real-time data packet for QoS guarantee. So this paper presents route repair technology that prevents route from breaking. If intermediate node moves to critical section, the node issues handoff packet and sends the packet to the next node. After next node receives handoff packet, the node broadcasts route request packet to the previous node for intermediate node. Finally, even if intermediate node moves out of the routing region, the source can continuously transmit data packets to the destination through the new path.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.884-891
• /
• 2006

A wireless sensor node is typically battery operated and energy constrained. Therefore it is critical to design efficient power management technique and scheduling technique. In this paper, we propose an OS-level power management technique for energy saving of wireless sensor node, it is called EA-SENTAS (Energy-Aware Sensor Node TAsk Scheduling). It can decrease the energy consumption of a wireless sensor node to use task scheduling technique that shut down components or use low power mode of each component when not needed. Simulation results show that EA-SENTAS saves energy up to 56 percent to compare with conventional duty cycle.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.8-9
• /
• 2018

3D printing has the unique advantage of the ability to customize freeform product even in small quantity. However, we need to select and apply the only necessary parts of it because of the high cost of the manufacturing technology. It is of critical importance in irregular-shaped curtain walls to ensure precision of construction as well as quality fo finish. Complex shape that have structural members at varying angles can have nodes of different shapes making it unfeasible to construct using a general node connection detail. Therefore, this study aims to utilize smart node system using 3D printing as a solution to complex irregular-shaped curtain wall design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.585-588
• /
• 2009

Wireless Sensor Network (WSN) is consisted of lots of tiny sensor nodes with limited processing power and computing resources. Thus, the most critical and fundamental element of WSN technology is sensor node, which gathers environmental information and transmits it to the user application systems. Due to the technological advancement, sensor nodes are become smaller and more intelligent, hence, expand their application area. Specifically, implantable wireless sensor node technology, to monitor and treat disease by implanting tiny sensor nodes into human body or livestock, shows further directions of WSN. In this paper, we have designed an implantable wireless sensor node to monitor livestock body temperature in real time. We also discussed on the additional considerations to implement real time bio-monitoring systems.

• Journal of Korea Multimedia Society
• /
• v.22 no.6
• /
• pp.676-683
• /
• 2019

Wireless Sensor Networks (WSNs) consist of multiple tiny and power constrained sensors which use radio frequencies to carry out sensing in a designated sensor area. To effectively design and implement reliable WSN, it is critical to consider models, protocols, and algorithms that can optimize energy consumption of all the sensor nodes with optimal amount of packet delivery. It has been observed that deploying a single sink node comes with numerous challenges especially in a situation with high node density and congestion. Sensor nodes close to a single sink node receive more transmission traffic load compared to other sensors, thus causing quick depletion of energy which finally leads to an energy hole and sink hole problems. In this paper, we proposed the use of multiple energy efficient sink nodes with brute force technique under optimized parameters to improve on the number of packets delivered within a given time. Simulation results not only depict that, deploying N sink nodes in a sensor area has a maximum limit to offer a justifiable improvement in terms of packet delivery ratio but also offers a reduction in End to End delay and reliability in case of failure of a single sink node, and an improvement in the network lifetime rather than deploying a single static sink node.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.284-293
• /
• 2005

A critical issue in applications involving networks of wireless sensors is their ability to synchronize, and mitigate the fading propagation channel effects. Especially when distributed 'slave' sensors (nodes) reach-back to communicate with the 'master' sensor (gateway), low power cooperative schemes are well motivated. Viewing each node as an antenna element in a multi-input multi-output (MIMO) multi-antenna system, we design pilot patterns to estimate the multiple carrier frequency offsets (CFO), and the multiple channels corresponding to each node-gateway link. Our novel pilot scheme consists of non-zero pilot symbols along with zeros, which separate nodes in a time division multiple access (TDMA) fashion, and lead to low complexity schemes because CFO and channel estimators per node are decoupled. The resulting training algorithm is not only suitable for wireless sensor networks, but also for synchronization and channel estimation of single- and multi-carrier MIMO systems. We investigate the performance of our estimators analytically, and with simulations.