• The Korean Journal of Health Service Management
• /
• v.9 no.1
• /
• pp.67-79
• /
• 2015

The aim of this descriptive cross-sectional study was determine the effect of critical thinking and clinical decision-making on ethical dilemmas. A survey of dental hygienists residing in Busan and South Gyeongsang, Korea was conducted using convenience sampling between September and December, 2013. A total of 153 responses were used in the final analysis. Data analysis and structural equation modeling were performed with IBM SPSS Statistics(version 21.0) and AMOS(version 18.0) programs. A negative(-) correlation coefficient(-0.37) was observed between critical thinking and ethical dilemmas on statistical analysis, i.e., higher critical thinking led to less ethical dilemmas(p=0.024, CR=-2.264). The values from the structural equation model were ${\chi}^2=98.124$ df=66, GFI=0.919, AGFI=0.871, and RMSEA=0.057. This study proposed a theoretical model in which critical thinking, ethical values, and decision-making skills should be firmly established to effectively respond to specific situations, such as ethical dilemmas, and that greater tendencies for critical thinking led to less ethical dilemmas, thereby demonstrating a negative(-) correlation between the two parameters.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.1
• /
• pp.16-20
• /
• 2023

The International Electrotechnical Commission (IEC) 61788-26:2020 provides guidelines for measuring the critical current of Rare-earth barium copper oxide (REBCO) tapes using two methods: linear ramp and step-hold methods. The critical current measurement criterion, 1 or 0.1 μV/cm of electric field from IEC 61788-26 has been normally applied to REBCO coils or magnets. No-insulation (NI) winding technique has many advantages in aspects of electrical and thermal stability and mechanical integrity. However, the leak current from the NI REBCO coil can cause distortion in critical current measurement due to the characteristic resistance which causes the radial current flow paths. In this paper, we simulated the NI REBCO coil by applying both linear ramp and step-hold methods based on a simplified equivalent circuit model. Using the circuit analysis, we analyzed and evaluated both methods. By using the equivalent circuit model, we can evaluate the critical current of the NI REBCO coil, resulting in an estimation error within 0.1%. We also evaluate the accuracy of critical current measurement using both the linear ramp and step-hold methods. The accuracy of the linear ramp method is influenced by the inductive voltage, whereas the accuracy of the step-hold method depends on the duration of the hold-time. An adequate hold time, typically 5 to 10 times the time constant (τ), makes the step-hold method more accurate than the linear ramp method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.771-780
• /
• 2016

Detecting a set of longest paths is one of the crucial steps in static timing analysis and optimization. Recently, the process variation during manufacturing affects performance of the circuit design due to nanometer feature size. Measuring the performance of a circuit prior to its fabrication requires a considerable amount of computation time because it requires multi-corner and multi-mode analysis with process variations. An efficient algorithm of detecting the K-most critical paths in multi-corner multi-mode static timing analysis (MCMM STA) is proposed in this paper. The ISCAS'85 benchmark suite using a 32 nm technology is applied to verify the proposed method. The proposed K-most critical paths detection method reduces about 25% of computation time on average.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.509-516
• /
• 2001

As the first step for the application of seismic landslide hazard maps to domestic cases, two types of hazard maps on Ul-joo from pseudostatic analysis and Newmark sliding block analysis are constructed and comllared. Arcview, the GIS program and the 1:5,000 digital maps of the test-site are used for the construction of hazard maps and tile parameters for the analyses are determined by seismic survey and laboratory tests. The results from the pseudostatic analysis have more conservative values of lower critical slope angles, although the results from the two different analyses have similar tendencies. In detail, with increasing the peak ground acceleration, the difference between the two analyses in the critical slope angle increases, while the difference decreases with increasing the maximum soil depth.

• English Language & Literature Teaching
• /
• no.4
• /
• pp.15-38
• /
• 1998

The main purpose of this paper is to take a look at a controversial approach to critical discourse analysis for the suggestion of a well-balanced perspective on such a biased presupposition and methodology. Currently linguists, language teachers and even social scientists have shown their strong interests in critical language awareness and its ideological involvements in order to encourage the general public to realize the social function of language in all modes of communication. It seems, however, to me to be increasingly clear that critical language study calls for a careful attempt based on an appropriate combination of textual facts and contextual factors in the interpretation of discourses. From this point, of view, this paper suggests some pedagogic / analytical guidelines for a study on language and its social connotations as a result of examining the cogency of two contrasting argumentations in relation to critical discourse analysis.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.513-518
• /
• 2001

This research has been performed to estimate the hunting motion hysteresis of railway passenger cars. An old and a new car with almost same structure are chosen as analysis models. To solve effectively a set of simultaneous equations of motion strongly coupled with creep relations, shooting algorithm in which the nonlinear relations are regarded as a two-point boundary value problem is adopted. The bifurcation theory is applied to the dynamic analysis to distinguish differences between linear and nonlinear critical speeds by variation of parameters. It is found that there are some factors and their operation area to make nonlinear critical speed respond to them more sensitivity than linear critical speed. Full-scale roller rig tests are carried out for the validation of the numerical results. Finally, it is concluded that the wear of wheel profile and the stiffness discontinuities of wheelset suspension caused by deterioration have to be considered in the analysis to predict hysteresis of critical speed precisely.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.115-130
• /
• 2012

These days, most of safety-critical systems, which are systems those failures or malfunction may result in death or serious injury to people, or loss or severe damage to social systems, or environmental harm, are being built of embedded software or loaded controlling software systems on computers, electrical and electronic components or devices. There are a lot kind of fault analysis methods to evaluate safety of the safety-critical systems equipped computers, electrical and electronic components or devices with software. However, the only assessment method to evaluate software safety of a safety-critical system is not enough to analysis properly on account of the various types and characteristic of software systems by progress of information technology. Therefore, this paper proposes the integrated evaluation method and carries out a case study for the software safety of safety-critical system which embedded or loaded software sizes are small and control response times are not sensitive by use of two security analysis methods which are Fault Tree Analysis (FTA) and Fault Modes and Effect Analysis (FMEA) for ubiquitous healthcare system.

• International Journal of Advanced Culture Technology
• /
• v.6 no.1
• /
• pp.23-31
• /
• 2018

The purpose of this study was to identify mediating effect of major satisfaction in the effect of critical thinking disposition on disaster recognition. For this study, 237 students of nursing students from universities in Jeollanam do participated in the study. The data collection was collected on Dec 1 to 7, 2017. The descriptive statistics was used to analyze general characteristics of participants, the differences in disaster recognition according to general characteristics were analyzed by t-test or ANOVA. Regression analysis was conducted to confirm the effect of critical thinking disposition on disaster recognition and Baron, R.M. And Kenny, D.A.'s mediation effect statistic analysis was used to confirm the mediating effect of major satisfaction in critical thinking disposition on disaster recognition. As a result, the critical thinking disposition affects the disaster recognition, and it was judged that the major satisfaction was mediating role. intellectual fairness sub-factor showed perfect mediating effect and confidence and general truth sub-factor showed partial mediating effect. Based on the above findings, it can be seen that not only critical thinking but also satisfaction with the major should be considered in order to increase the recognition of the sudden disaster. In this case, research for linking critical thinking disposition and major satisfaction is likely to be meaningful. Through the results of this study, we suggest the program development of a linkage between critical thinking disposition and major satisfaction to increase the recognition of disaster.

• The Journal of Information Systems
• /
• v.16 no.4
• /
• pp.131-155
• /
• 2007

The purpose of this thesis is to study on the philosophical analysis model and its methodological application of information systems research evaluation from critical realist perspective. Fist of all, I examine ontological epistemological methodological assertions of critical realism. Because the philosophy of critical realism is an opportunity for information systems study. I examine Dobson and Mutch's critical realist perspective on actors-structure model. I suggest a critical realist actors-praxis-structure model. This model provides the potential for a new approach to social investigations in its provision of an ontology for the analytical separation of structure and agency. Of most importance might be the incorporation of non-humans into the analysis of social interaction and of technology into the elaboration of structures. I also examine Tsoukas's critical realistic meta-theory of management. I suggest a critical realist IS management model. This model elucidate the nature of management and delineate the scope of applicability of various perspectives on management. The causal powers of management reside in the real domain and, taken together, their logics are contradictory, the effects of their contradictory composition are contingent upon prevailing contingencies. I analyze Carlsson's theory of design knowledge. His framework builds on that the aim of IS design science research is to develop practical knowledge for the design and realization of different classes of IS initiatives, where IS are viewed as socio-technical systems and not just IT artefacts. The framework proposes that the output of IS design science research is practical IS design knowledge in the form of field-tested and grounded technological rules. The IS design knowledge is developed through an IS design science research cycle. In conclusion, I think that IS actors-praxis-structure model, meta-theoretical IS management model, and IS design knowledge model according to critical realistic approach are very useful for IS research evaluation. Nevertheless, important problems are left not resolved.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.10
• /
• pp.661-668
• /
• 2013

A safety critical system is a system that leads to injury of people, damage of property and environment due to functional failures or occurrence of undesired condition. Therefore, to ensure the safety of a system, system engineers should consider the inherent hazards of the system at design phase of the system development, and also should design the prevention actions to minimize damage when an accident occurred. The objective of these actions is preventing the serious damage from accidents that can occur due to unforeseen circumstance. Recently, many studies have been performed to identify and analyze their hazards at design phase of safety critical systems. This paper suggests a safety analysis technique for analyzing the collision among those prevention actions to reduce accident and its effect by the collision of these actions that did not mentioned in previous studies. Through the proposed technique, it would improve robustness of safety and would help the design of prevention actions into system for the occurrence of accidents.