• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.186-191
• /
• 2012

In this paper, we present a pH measurement method that uses a microcantilever-array-based biosensor system. It is composed of microcantilever array, liquid cell, micro syringe pump, laser diode array, position sensitive detector, data acquisition device, and data processing software. Four microcantilevers are functionalized with pH-sensitive MHA(mercaptohexadecanoic acid) as a probe, while three microcantilevers are functionalized with HDT(hexadecane thiol) as reference. We prepare PBS(phosphate buffered saline) solutions of different pH and inject them into the liquid cell with a predefined volumetric speed at regular time intervals. The functionalized mircocantilevers in the liquid cell deflect as a self-assembled monolayer on the microcantilever binds with probe molecules in the solution. The difference in deflection between the MHA-covered probe microcantilever and the HDT-covered reference microcantilever was used to compensate for thermal drift. The deflection difference clearly increases with increasing pH in the solution. It was shown that when the pH values of the PBS solutions are high, there were large variations in the deflection of microcantilevers, whereas there were small variations for low pH value. The experimental results show that the microcantilever array functionalized with MHA and HDT can detect pH value with good repeatability.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.493-501
• /
• 1995

Optimum design of a viscoelastic damping layer which is unconstrainedly cohered on a steel plate is discussed from the viewpoint of the modal loss factor. Themodal loss factor is analyzed by using the energy method to the base steel plate and cohered damping layer. Optimum distributions of the viscoelastic damping layer for modes are obtained by sequentially changing the position of a piece of damping layer to another position which contributes to maximizing the modal loss factors. Analytical procedure performed by using this method simulated for 3 fundamental modes of an edge-fixed plate. Simulated results indicate that the modal loss factor ratios can be increase by as much as 210%, or more, by optimizing the thickness distribution of the damping layer to two times of the initial condition which is entirely covered. Optimum configurations for the modes are revealed by positions where added damping treatments become most effective. The calculated results by this method are validated by comparison with the experimental results and the calculated results obtained by the Ross-Ungar-Kerwin's model in the case of the layer is uniformly treated over the steel plate.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.12
• /
• pp.1294-1301
• /
• 2008

Under passive RFID environment, this paper presents a new localization of a mobile robot traversing over the floor covered with tags, which is superior to existing methods in terms of estimation performance and cost effectiveness. Basically, it is assumed that a mobile robot is traveling along a series of straight line segments, each segment at a certain constant velocity, and that the number of tags sensed by a mobile robot at each sampling instant is at most one. First, for a given line segment with known starting point, the velocity and position of a mobile robot is estimated using the spatial and temporal information acquired from the traversed tag. Some discussions are made on the validity of the basic assumptions and the localization for the initial segment with unknown starting point. Second, for a given tag distribution density, the optimal tag arrangement is considered to reduce the position estimation error as well as to make easy the tag attachment on the floor. After reviewing typical tag arrangements, the pseudorandom tag arrangement is devised inspired from the Sudoku puzzle, a number placement puzzle. Third, through experiments using our passive RFID localization system, the validity and performance of the mobile robot localization proposed in this paper is demonstrated.

• Archives of Plastic Surgery
• /
• v.47 no.3
• /
• pp.277-280
• /
• 2020

Functionally, the lip serves to prevent food and drink from spilling out of the beginning of the gastrointestinal tract, and it is also used for vocalization. In addition, the lip has cosmetic importance as part of the face involved in making expressions, and in many cultures, it is considered to be sexually appealing. The results of lip reconstruction procedures must therefore be both functionally and cosmetically satisfactory. When the orbicularis oris muscle and oral mucosa are excised, functional reconstruction is prioritized. In contrast, if there are no functional problems, cosmetic reconstruction is the main focus. This case involved the reconstruction of a right upper lip defect caused by a dog bite. When the skin defect was covered with a local flap, the right angulus oris shifted medially, so we incorporated a YV flap at the right angulus oris to modify its position and allow for a cosmetically satisfactory result. We believe that this method can be used not only for cases in which asymmetry of the angulus oris is expected to occur at the time of lip reconstruction, but also for cases in which it has already occurred in the initial operation.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1409-1411
• /
• 2003

The application of simulated KOMPSAT-2 imagery to monitor graveyards is to be developed. Positions calculated from image were compared with those obtained from Geographic Positioning System. With 24 checkpoints, the position of graveyards showed within 5-meter range. Unsupervised classification, supervised classification, and objected-orientation classification algorithms were used to extract the graveyard. Unsupervised classification with masking processes based on National topographic data gives the best result. The graveyards were categorized with four types in field studies while the two types of graveyards were shown in descriptive statistics. Cluster Analysis and discriminant analysis showed the consistency with two types of tombs. It was hard to get a specific spectral signature of graveyards, as they are covered with grasses at different levels and shaded from the surrounding trees. The slopes and aspects of location of graveyards did not make any difference in the spectral signatures. This study gives the basic spectral characteristics for further development of objected-oriented classification algorithms and plausibility of KOMPSAT-2 images for management of mountainous areas in the aspect of position accuracy and classification accuracy.

• Journal of Chest Surgery
• /
• v.11 no.2
• /
• pp.175-180
• /
• 1978

A rare form of tetralogy of Fallot, in which large ventricular septal defect was located at subpulmonary position rather than beneath a well developed crista supraventricularis was operated in this Department. This case satisfied the criteria for the diagnosis of tetralogy of Fallot, having large ventricular septal defect beneath the aortic valve with overriding of aorta, pulmonary stenosis and right ventricular hypeFtrophy. The operation was done through a median sternotomy using cardiopulmonary bypass. A vertical right ventriculotomy was extended to the pulmonary valve ring. Pulmonary and aortic valve were adjacent to each other, in contrast to the situation of classic tetralogy of Fallot. Pulmonary valvulotomy was done and ventricular septal defect was closed. with Teflon, and right ventricular outflow tract was reconstructed with woven Dacron covered by pericardial patch after minimal resection of septal band. The post-operatiove courses was uneventful except wound infection. The patient was discharged 15 days after open heart surgery.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.448-453
• /
• 1999

The three-dimensional structure of the Sertoli cell in the Korean native bull was investigated by scanning electron microscopy. Morphologically, four types of Sertoli cell processes were evident: 1) sheet-like processes, 2) sleeve-like processes, 3) bough-like processes and 4) finger-like processes. The sheet-like processes rested upon more than half of the surface of each spermatogonia, spermatocyte and spermatid. Sleeve-like processes, bough-like processes and finger-like processes are observed in the middle and apical portion of seminiferous tubule. All Sertoli cell processes are originated from Sertoli cell column. Just before spermiation, the apical sheet-like processes are shifted from their position at the spermatid head, and bough-like processes covered the disengaged residual body, after which the residual body was no longer evident in the tubule. Though the mechanism for this elimination is not known, the process suggests a reciprocity between the Sertoli and germ cells.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.705-712
• /
• 2009

The state changes of ocean covered over 70% of earth surface are one of the greatest factor of weather catastrophe. Recently weather extraordinary events are followed by steep increase of sea water temperature and scientists in various fields are studying and warning the weather changes. In this paper, floating buoy is developed to monitor ocean environments via Orbcomm satellite and a method is proposed to increase measurement accuracy of sea water temperature with common low price temperature sensor. Experimental results are presented to illustrate the usability and effectiveness of the developed system. A web-based real time monitoring system is built to monitor ocean environmental information such as sea and air temperature, salinity according to the position of buoy through the internet for user convenience.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.660-664
• /
• 2003

The optimal thickness distribution of an active damping layer is sought so that it satisfies a certain constraint on the dynamic performance of a system minimizing control efforts. To obtain a topologically optimized configuration, which includes size and shape optimization, thickness of the active damping layer is interpolated using linear functions. With the control energy as the objective function to be minimized, the state error energy is introduced as the dynamic performance criterion for the system and used lot a constraint. The optimal control gains are evaluated from LQR simultaneously as the optimization of the layer position proceeds. From numerical simulation, the topologically optimized distribution of the active damping layer shows the same dynamic performance and cost as the Idly covered counterpart, which is optimized only in terms of control gains, with less amount of the layer.

• Journal of the Korean Home Economics Association
• /
• v.49 no.5
• /
• pp.23-32
• /
• 2011

This study will covered socio-cultural background and characteristic of the face-concealing culture of Istanbul which has liberal and westernized clothes culture for women even if it's an city in an Islamic country. This study depended on literatures related to religion, culture and costumes of the Ottoman Empire, especially costumic data on miniature of turkey, which was famous from 16th to 19th century. Since the 17th century, the Ottoman Empire has been gradually influenced by European countries but the change of women's clothes was not considerable. In the 18th century, women's clothes were influenced by foreign fashions. A veil to cover the face was gradually disappeared and traditional Turkish headdresses were replaced by European hats. Through face-concealing culture of Istanbul, we can see some socio-cultural features like Islamic religious character, one's social position, economic situation, westernization and renovation, beauty and completion of costume, duality for the reason of regional difference.