• Journal of the Optical Society of Korea
• /
• 제14권1호
• /
• pp.38-41
• /
• 2010

We design and fabricate a widely tunable laser diode made of InGaAsP-InP. The diode is monolithically integrated with a wavelength-selective coupled-ring reflector and semiconductor amplifiers. For realization of a compact size device, deeply etched multi-mode interference couplers and square ring resonators composed of total-internal-reflection mirrors are adopted and fabricated using a self-aligned process. It is demonstrated that the laser diode exhibits single mode operation and 16 nm tuning range with side-mode-suppression-ratio exceeding 20 dB.

• 한국통신학회논문지
• /
• 제16권9호
• /
• pp.862-876
• /
• 1991

본 논문에서는 N-선로 결합 구조의 등가 이미턴스 산출식을 N-선로 결합시스템의 normal mode 정수로 표현하였다 제안한 산출식은 다양한 결합 구조 즉 방향성 결합기, DC 블럭, 대역통과/대역소거 여파기 및 기타 균일하게 결합된 형태인 여파기 등에 이용될 수 있도록 일반화 되었으며 이들 계산식은 준-TEM 모드로 가정한 결과이다. 이를 이용하여 임의의 임피던스로 종단한 일반적인 4-포트 결합 선로에서 정의된 산란정수를 구하여 입, 출력 포트에 접속된 임피던스에 정합시키는 최척 선로 규격을 구하는 과정을 제시하였다. 제시된 방법을 적용하여 복수 마이크로스트립 결합 선로인 3-선 2-포트 대역소거 여파기의 주파수 특성을 기존의 방법과 비교하여 일치함을 확인하고 5-선 4-포트 구조를 테프론(비유전율 $e$r=2.55) 기판(두께 h=1.588mm) 에 중심 주파수 4 GHz로 설계하였다. 설계 수치에 따른 회로를 제작하여 측정한 실험 결과는 설계시 얻어진 주파수 특성 이론치에 근접하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권3호
• /
• pp.124-130
• /
• 2005

In this paper, we designed a cylindrical type light source having an electromagnetic principle of inductively coupled plasma, and measured its electrical-optical properties. Using the transformer principle, an electrically equivalent circuit cylindrical type light source was analyzed. According to the parameters of electromagnetic induction, which were diameter of coil with cpO.3$\~$ 1.2mm, number of turns with 4$\~$ 12 turns, distance with 40$\~$ l20mm and RF power with 10$\~$ 150W, the electrical .md optical properties were measured. When the diameter of the coil was cp0.3mm, number of turns was 8 and distance was 40mm, and the maximum brightness of 29,730 cd/m$^{2}$ was shown with RF power l50W. The relationship between electromagnetic induction and plasma discharges was demonstrated using the mode transition from E-mode to H-mode

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.43-49
• /
• 1997

A rotating rigid disk, attached on a flexible shaft or supported by a torsional spring, experiences precessional whirling due to gyroscopic moment loading. It is well known in rotor dynamics area that, as the rotational speed increases, the precessional mode of the rotating rigid disk starts splitting into two: forward and backward precessional modes. On the other hand, it is also well known in disk vibration area that a rotating flexible disk also shows another kind of mode splitting phenomenon due to the rotation, resulting in forward and backward traveling waves. When rotating multiple flexible disks are coupled in vibration with the supporting Flexible shaft, the associated mode splitting should be compatible with the two seemingly different vibration analysis methods. This paper investigates the possibility of fusing the precessional and traveling wave mode splittings so that the bending coupled disk vibrations in HDD spindle systems can be better understood.

• 한국광학회지
• /
• 제14권3호
• /
• pp.298-305
• /
• 2003

Index-coupled(IC) DFB 레이저에서 여러 가지 kL과 양 단면 반사율 조합에 대하여 문턱 전류 이상에서 주입 전류에 따른 단일 모드 수율을 구하였고 그 결과를 문턱 전류에서 f number에 따른 단일 모드 수율과의 관련성에 대하여 검토하였다. 그결과 문턱 전류 이상에서 단일 모드 수율과 문턱 전류에서 f number에 따른 단일 모드 수율과의 관련성이 매우 적음을 알수 있었다. 문턱 전류 이상에서 kL이 0.8과 1.25인 경우가 kL이 2와 3인 경우에 비하여 SHB 현상이 작아 단일 모드 수율이 큼을 알 수 있었다 또한 양 단면 반사율 조합이 AR-HR과 AR-CL에 대하여 AR 단면의 반사율이 단일 모드 수율에 미치는 영향에 대하여 살펴보았다. 양 단면 반사율 조합이 AR-HR인 경우 AR단면의 반사율이 작을수록 단일 모드 수율은 크게 나타났다. 반면에 AR-CL의 경우 최대의 단일 모드 수율을 나타내는 최적의 AR단면의 반사율이 존재하였다. 본 논문에서 수행한 IC DFB 레이저의 단일 모드 수율 계산에서는 kL이 0.8이고 양 단면 반사율 조합이 AR(1%)-HR인 경우가 문턱전류 이상에서 단일 모드 수율이 가장 컸다.

• 한국광학회지
• /
• 제20권1호
• /
• pp.41-47
• /
• 2009

다중모드 간섭기를 이용한 반도체 이중사각형 링 공진기에서의 단일 파장 모드 발진특성을 관찰하였다. 실험에 사용된 공진기의 에피택시는 발진 중심파장이 $1.55{\mu}m$인 InGaAsP-InP 다중양자우물 구조를 활성층으로 사용하여 제작되었다. 공진기의 구조는 다중모드 간섭기를 결합기로 이용한 이중사각형 링 공진기이며 발진특성을 측정하였다. 여러 가지 구조 변수를 즉 공진기의 구조 및 크기, 다중모드 간섭기의 길이를 변화시키며 실험을 진행하였다. 실험 결과 다양한 크기와 구성에서 단일파장모드선택 특성이 잘 나타남을 확인할 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.219-224
• /
• 2016

In this paper, coupled-mode theory (CMT) is used to obtain a transient solution analytically for a wireless power transfer system (WPTS) when unit energy is applied to one of two resonators. The solutions are compared with those obtained using equivalent circuit-based analysis. The time-domain CMT is accurate only when resonant coils are weakly coupled and have large quality factors, and the reason for this inaccuracy is outlined. Even though the time-domain CMT solution does not describe the WPTS behavior precisely, it is accurate enough to allow for an understanding of the mechanism of energy exchange between two resonators qualitatively. Based on the time-domain CMT solution, the critical coupling coefficient is derived and a criterion is suggested for distinguishing inductive coupling and magnetic resonance coupling of the WPTS.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.839-844
• /
• 2003

The effect of water level on the free vibration of a partially water-filled two rectangular plates structure was investigated by experimental modal analysis and finite element analysis using ANSYS computer program. Modal parameters of two rectangular plates coupled with water were obtained by means of experiment and the FEM solutions were compared with the experimental solutions to verify the finite element model. As a result, the comparison between the experiment and FEM results showed excellent agreement. The transverse vibration modes, in-phase and out-of-phase, were observed alternately in the fluid-coupled system. The effect of water level and water gap size on the fluid-coupled natural frequency were investigated. It was found that the natural frequency of the partially water-filled two rectangular plates are not proportional to the water level, but depend on mode number of plates.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.11-22
• /
• 2018

This paper presents a single switch, high step-up, non-isolated dc-dc converter suitable for renewable energy applications. The proposed converter is composed of a coupled inductor, a passive clamp circuit, a switched capacitor and voltage lift circuits. The passive clamp recovers the leakage inductance energy of the coupled inductor and limits the voltage spike on the switch. The configuration of the passive clamp and switched capacitor circuit increases the voltage gain. A wide continuous conduction mode (CCM) operation range, a low turn ratio for the coupled inductor, low voltage stress on the switch, switch turn on under almost zero current switching (ZCS), low voltage stress on the diodes, leakage inductance energy recovery, high efficiency and a high voltage gain without a large duty cycle are the benefits of this converter. The steady state operation of the converter in the continuous conduction mode (CCM) and discontinuous conduction mode (DCM) is discussed and analyzed. A 200W prototype converter with a 28V input and a 380V output voltage is implemented and tested to verify the theoretical analysis.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.8-15
• /
• 2011

In this paper, the influence of a crack on the natural frequency of cracked cantilever L-shaped beam with coupled bending and torsional vibrations by analytically and experimentally is analyzed. The L-shaped beam with a crack is modeled by Hamilton's principle with consideration of bending and torsional energy. The two coupled governing differential equations are reduced to one sixth-order ordinary differential equation in terms of the flexural displacement. The crack is assumed to be in the first, second and third mode of fracture and to be always opened during the vibrations. The theoretical results are validated by a comparison with experimental measurements. The maximal difference between the theoretical results and experimental measurements of the natural frequency is less than 7.5% in the second vibration mode.