• 한국입자에어로졸학회지
• /
• 제18권3호
• /
• pp.61-68
• /
• 2022

In this study, a fluidized bed particle generator was developed to generate an aerosol without supply of compressed air and to increase portability. It was assumed that the mixing ratio of the test particles and beads, the input amount, and the air flow rate supplied to the generator would have effect on the aerosol generation characteristics. The product of these three parameters was set as a characteristic parameter and particle generation characteristics according to the change of the characteristic parameter were observed. As a result, it was confirmed that the input amount of test particles and beads was not suitable as a characteristic parameter and a characteristic parameter expressed as a product of the mass mixing ratio and the air flowrate was newly defined. When the new characteristic parameter is applied, it can be confirmed that the total amount of particles generated from the particle generator is a function of the characteristic parameter. As a result of measuring the amount of particle generation by adjusting the characteristic parameter, it was confirmed that the performance required for the test particle generator for the field inspection equipment of PM-2.5 sensors could be satisfied.

• Asia pacific journal of information systems
• /
• 제26권3호
• /
• pp.427-448
• /
• 2016

The stochastic phenomena of traffic network condition, such as traffic speed and density, are affected not only by exogenous traffic control but also by endogenous changes in service time during congestion. In this paper, we propose a mixed M/G/1 queuing model by introducing a condition-varying parameter of traffic congestion to reflect structural changes in the traffic network. We also develop congestion indices to evaluate network efficiency in terms of traffic flow and economic cost in traffic operating system using structure-changing queuing model, and perform scenario analysis according to various traffic network improvement policies. Empirical analysis using Korean highway traffic operating system shows that our suggested model better captures structural changes in the traffic queue. The scenario analysis also shows that occasional reversible lane operation during peak times can be more efficient and feasible than regular lane extension in Korea.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.333-336
• /
• 1992

In this paper, We propose a PID-type of self-tuning algorithm which is based on the parameter estimation and the minimization of the cost function. We use the CARIMA model for parameter estimation and determine the discrete PID controller parameters by minimizing the cost function which considers the quadratic deviations of the predicted output over the set-point as well as the control efforts. Also, The algorithm is extended by incorporating constraints of the control signal. Simulations are performed to illustrate the efficiency of the proposed method.

• 대한산업공학회지
• /
• 제22권1호
• /
• pp.17-36
• /
• 1996

An economic two-stage screening procedure is presented when both lower and upper specification limits are given on the performance variable. A screening variable which is highly correlated with the performance variable is used first to decide whether an item should be accepted, rejected, or undecided. The performance variable is then used to classify the undecided items. The two variables are assumed to be jointly normally distributed. A cost model is constructed on the basis of six cost components; inspection costs of screening and performance variables and costs caused by type I and type II misclassification errors related with lower and upper specification limits. Optimal cutoff values on the screening variable are determined so that the average outgoing quality exceeds a prespecified level. Solution methods are provided for both known-parameter and unknown-parameter cases.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.157-158
• /
• 2009

본 연구는 휨-압축을 받는 교각 기둥 부재의 구조 요소별 철근과 콘트리트 강도 및 하중조건에 따른 구조거동 특성을 분석하고, 교각 기둥에 대한 매개변수 해석(Parameter Study)을 실시하여 콘크리트 강도별 및 높이별 기둥의 최적단면 및 공사비를 검토하였다. 검토결과, 기존의 27MPa 콘크리트 대신 40MPa 고강도 콘크리트를 적용할 경우, 기둥 단면이 축소되고 공사비도 평균 8%정도 감소되어 교각의 미관 및 경제성 측면에서 개선효과가 있음을 알 수 있었다. 또한 음성${\sim}$충주간 고속도로 건설공사내의 신효교 교각에 대하여 본 연구결과를 적용하여 실용적 효과성을 검증하였다.

• 한방안이비인후피부과학회지
• /
• 제30권1호
• /
• pp.17-28
• /
• 2017

Objectives : The aim of this study is reviewing the literature to extracting the key parameter and finding the calibration parameter for the clinical study with economical assessment protocol on atopic dermatitis. Methods : Literature search is performed using PUBMED for literature published from Janurary 2000 to December 2016. We included randomized controlled trials(RCTs) with economic assessment in which human participants. Results : Among the articles published from January 2000 to December 2016, The 1464 articles were found. After reviewing the title, abstract and full text, the five articles were selected. Selected articles are classified 3 CEA(cost effective analysis)study, 1 CMA(cost minimizing analysis)study and 1 cost analysis study. Conclusions : We found highly reliable key parameters and calibration parameters, which might be necessary factors for developing research protocol of economic evaluation alongside clinical trial about atopic dermatitis patients.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.57-62
• /
• 2003

A general procedure of obtaining reliable one-step kinetics model for hydrocarbon mixture from the fully detailed chemistry is described iin this study. One-step theoretical formulation of the induction parameter model IPM uses a theoretical reconstruction of the induction time database obtained from a detailed kinetics library. Non-dimensional induction time calculations is compared with that of detailed kinetics. The IPM was latter implemented to fluid dynamics code and applied for the numerical simulation of detonation wave propagation. The numerical results including the numerical smoked-foil record show the all the details of the detonation wave propagation characteristics at the cost around 1/100 of the detailed kinetics calculation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.493-495
• /
• 1998

Robust design is one method to make manufacturing less sensitive to manufacturing process. Also it is cost effective technique to improve the quality process. This method uses statistically planned experiments to vary settings of important process control parameters. In this paper we apply fuzzy optimization and fuzzy logic system to robust design concept. First a method which uses fuzzy optimization in obtaining optimum settings by measured data from experiments will be presented. Second, fuzzy logic system is made to reduce experiments using experiments results consisted with key control parameter combinations. Then optimum parameter set points are obtained by the descrebed first fuzzy optimization method after prediction the results of each parameter combinations considering each control parameter variations by nonsingleton fuzzy logic system concept.

• 한국건설관리학회논문집
• /
• 제2권2호
• /
• pp.90-97
• /
• 2001

공공기관에서 발주하는 건설공사의 계약에 있어서 가장 중요한 것은 합리적인 방법으로 결정된 적정한 예정가격을 기준으로 계약을 체결하는 것이다. 적정예정가격을 산정하기 위해서는 먼저 기수행한 실적공사비를 근간으로 하여 건설공사의 다양성과 불확실성을 반영할 수 있는 비용자료의 축적이 선결과제라 할 수 있다. 따라서 본 연구는 실적공사비적산방식에 따라 과거의 가장 유사한 실적자료에 기초한 확률적 비용개념을 도입하여 실적공사비 데이터 베이스 구축 모형과 이를 통한 예정공사비 산정방법 및 전산화 방안을 제시하고자 한다.

• 품질경영학회지
• /
• 제19권2호
• /
• pp.86-95
• /
• 1991

Empirical Bayes estimation of the binomial parameter ${\theta}$ is considered when the sample size in each component problem is random. The result is applied to the lot acceptance sampling problem in the presence of various kinds of costs including cost for sampling.