• Imaging Science in Dentistry
• /
• v.43 no.3
• /
• pp.135-143
• /
• 2013

Purpose: This study was performed to obtain a quantitative evaluation of the cortical and cancellous bone graft harvestable from the mental and canine regions, and to evaluate the cortical vestibular thickness. Materials and Methods: This study collected cone-beam computed tomographic (CBCT) images of 100 Italian patients. The limits of the mental region were established: 5 mm in front of the medial margin of each mental foramen, 5 mm under the apex of each tooth present, and above the inferior mandibular cortex. Cortical and cancellous bone volumes were evaluated using SimPlant software (SimPlant 3-D Pro, Materialize, Leuven, Belgium) tools. In addition, the cortical vestibular thickness (minimal and maximal values) was evaluated in 3 cross-sections corresponding to the right canine tooth (3R), the median section (M), and the left canine tooth (3L). Results: The cortical volume was $0.71{\pm}0.23mL$ (0.27-1.96 mL) and the cancellous volume was $2.16{\pm}0.76mL$ (0.86-6.28 mL). The minimal cortical vestibular thickness was $1.54{\pm}0.41mm$ (0.61-3.25 mm), and the maximal cortical vestibular thickness was $3.14{\pm}0.75mm$ (1.01-5.83 mm). Conclusion: The use of the imaging software allowed a patient-specific assessment of mental and canine region bone availability. The proposed evaluation method might help the surgeon in the selection of the donor site by the comparison between bone availability in the donor site and the reconstructive exigency of the recipient site.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.217-230
• /
• 1997

The location of the mandibular canal and the cortical thickness of the mandible is important in the practice of dentistry. This study was performed on twenty chosen dry mandibles, which were of adults and included fully erupted premolars and molars. The purpose of this study was to evaluate the location of the mandibular canal and the cortical thickness of the mandible on computed tomograms and to aid in the surgical treatment plans. The obtained results were as follows; 1. The horizontal distance between the mandibular canal and the buccal external border was 6.6±0.9mm on Somesial root of the first molar), and it was increased posteriorly. The horiwntal distance between the mandibular canal and the lingual external border was 4.1±1.lmm on S/sub 0/, and it was decreased posteriorly. 2. The vertical distance between the alveolar crest and the mandibular canal was 16.9±1.6mm on S/sub 0/, and it was decreased posteriorly. The vertical distance between the inferior border of mandible and the mandibular canal was 8.8±1.3mm on S/sub 0/, and it was increased anteriorly and posteriorly. 3. The thickness of the buccal cortical plate was 2.2±0.4mm on S/sub 0/. and it was increased posteriorly. But, that of the lingual cortical plate was 2.0±0.6mm on S/sub 0/ and it was decreased posteriorly. 4. The area of the buccal cortical plate was 66.5±1.0mm² on S/sub 0/. and it was increased posteriorly. But, that of the lingual cortical plate was 65.8±0.9mm² on S/sub 0/ and it was decreased posteriorly.

• Restorative Dentistry and Endodontics
• /
• v.43 no.3
• /
• pp.33.1-33.8
• /
• 2018

Objectives: This study aimed to investigate the prevalence of a separate distolingual root and to measure the thickness of the buccal cortical bone in mandibular first molars in Koreans using cone-beam computed tomography (CBCT) images. Materials and Methods: High-quality CBCT data from 432 patients were analyzed in this study. The prevalence of a separate distolingual root of the mandibular first molar was investigated. The distance from the distobuccal and distolingual root apices to the outer surface of the buccal cortical bone was measured. We also evaluated the thickness of the buccal cortical bone. Results: The prevalence of a separate distolingual root (2 separate distal roots with 1 canal in each root; 2R2C) was 23.26%. In mandibular first molars with 2R2C, the distance from the distobuccal root apex to the outer surface of the buccal cortical bone was 5.51 mm. Furthermore, the distance from the distolingual root apex to the outer surface of the buccal cortical bone was 12.09 mm. In mandibular first molars with 2R2C morphology, the thickness of the buccal cortical bone at the distobuccal root apex of the mandibular first molar was 3.30 mm. The buccal cortical bone at the distobuccal root apex was significantly thicker in the right side (3.38 mm) than the left side (3.09 mm) (p < 0.05). Conclusions: A separate distolingual root is not rare in mandibular first molars in the Korean population. Anatomic and morphologic knowledge of the mandibular first molar can be useful in treatment planning, including surgical endodontic treatment.

• Imaging Science in Dentistry
• /
• v.37 no.2
• /
• pp.79-82
• /
• 2007

Purpose: The purpose of this study was to investigate whether panoramic radiographs were useful in predicting osteoporosis. Materials and Methods: 50 postmenoposal women between the age of 41.8 and 78.5 were classified as normal and osteoporosis groups according to the bone mineral density of lumbar vertebrae. Panoramic radiographs were taken. Age, body mass index, remaining mandibular teeth, mandibular cortical thickness and morphology, and fractal dimensions at periapical areas of mandibular first molars were evaluated to differentiate the two groups. Results: The age of osteoporotic group was statistically significantly higher than that of normal group (p<0.05), but not the body mass index or number of remaining mandibular teeth. The mean fractal dimension of osteoporotic group was $1.391{\pm}0.085$, and was significantly lower than that of the normal group, which was $1.523{\pm}0.725$ (p<0.01). Thick mandibular cortical thickness was common in normal group, whereas thin or very thin mandibular cortical thickness was common in osteoporotic group and the difference was significant (p < 0.05). C2 pattern was common in normal group followed by C1, whereas C2 was common in osteoporotic group followed by C3. The difference was statistically significant (p< 0.0 1). Conclusion: Age, mandibular cortical thickness and shape, fractal dimension on panoramic radiographs were useful in predicting osteoporosis.

• Korean Journal of Biological Psychiatry
• /
• v.24 no.2
• /
• pp.68-74
• /
• 2017

Objectives It is well known that problem drinking is associated with alterations of brain structures and functions. Brain functions related to alcohol consumption can be determined by the resting state functional connectivity in various resting state networks (RSNs). This study aims to ascertain the alcohol effect on the structures forming predetermined RSNs by assessing their cortical thickness. Methods Twenty-six abstinent male patients with alcohol dependence and the same number of age-matched healthy control were recruited from an inpatient mental hospital and community. All participants underwent a 3T MRI scan. Averaged cortical thickness of areas constituting 7 RSNs were determined by using FreeSurfer with Yeo atlas derived from cortical parcellation estimated by intrinsic functional connectivity. Results There were significant group differences of mean cortical thicknesses (Cohen's d, corrected p) in ventral attention (1.01, < 0.01), dorsal attention (0.93, 0.01), somatomotor (0.90, 0.01), and visual (0.88, 0.02) networks. We could not find significant group differences in the default mode network. There were also significant group differences of gray matter volumes corrected by head size across the all networks. However, there were no group differences of surface area in each network. Conclusions There are differences in degree and pattern of structural recovery after abstinence across areas forming RSNs. Considering the previous observation that group differences of functional connectivity were significant only in networks related to task-positive networks such as dorsal attention and cognitive control networks, we can explain recovery pattern of cognition and emotion related to the default mode network and the mechanisms for craving and relapse associated with task-positive networks.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.212-219
• /
• 2007

Objective: The purpose of this study was to provide an anatomical reference for cortical bone and soft tissue thickness, and the attached gingiva width in the mandible. Methods: Fifteen males and fifteen females participated in this study. An acrylic template was fabricated and the radiopaque markers were bonded on the estimated alveolar crest to take measurements of the hard and soft tissue thickness at the same locations. CT images were taken in samples wearing an acrylic template. Cortical bone and soft tissue thickness were measured at 2, 4, 6 and 8 mm from the alveolar crest in interradicular spaces from central incisor to first permanent molar. The attached gingival width was calibrated. Results: Cortical bone thickness was $1.33{\pm}0.38mm$ and soft tissue thickness was $1.49{\pm}0.54mm$. Cortical bone thickness was increased in the posterior area, while it was not the case for the soft tissue thickness. In addition, the total thickness was $2.82{\pm}0.70$. The attached gingival width was wider in the anterior area compared to that in posterior area. Conclusion: These results suggest that the attached gingiva width should be considered upon placement of mini-implants in the mandibular posterior area for orthodontic anchorage.

• Imaging Science in Dentistry
• /
• v.36 no.4
• /
• pp.183-188
• /
• 2006

Purpose: The purpose of this research was to study bone changes after bilateral sagittal split osteotomy through fractal analysis and measurement of mandibular cortical thickness. Materials and Methods: This study included twenty-two prognathic patients who underwent bilateral sagittal split osteotomy. Panoramic radiographs of these patients were taken immediately before operation and at 1 month, 6 months, and 12 months postoperatively. The fractal dimension was measured by the box-counting method in the region of interest centered on both the basal and interdental bones between the first and second mandibular molars. Measurements of mandibular cortical thickness were taken both in the area between the first and second mandibular molars and at the osteotomy site. Changes of fractal dimension and cortical thickness over four stages were statistically analyzed. Results: The fractal dimension of the mandibular basal bone before surgery and after 1 month, 6 months and 12 months were $1.4099{\pm}0.0657,\;1.382{\pm}0.0595,\;1.2995{\pm}0.0949,\;and\;1.4166{\pm}0.0676$, respectively (Repeated-measures ANOVA, P<0.001). However, no statistically significant differences were noted in interdental fractal dimensions among the four stages. Mandibular cortical thickness between the first and second mandibular molars before operation and after 1 month, 6 months and 12 months was $3.74{\pm}0.48mm,\;3.63{\pm}0.47mm,\;3.41{\pm}0.61mm\;and\;3.55{\pm}0.66mm$ (P<0.01), respectively. Mandibular cortical thickness at the osteotomy site at each of the four stages was $3.22{\pm}0.44mm,\;2.87{\pm}0.59mm,\;2.37{\pm}0.61mm\;and\;2.64{\pm}0.62mm$, respectively (P<0.001). Conclusion: This study suggests that the mandibular tissue continued decreasing for 6 months postoperatively and then increased over the subsequent 6 months.

• Korean Journal of Biological Psychiatry
• /
• v.17 no.4
• /
• pp.203-209
• /
• 2010

Objectives : Increasing evidence suggests the presence of neurobiological bases for temperamental characteristics in humans. Brain correlates of harm avoidance(HA) have been most extensively studied using functional and structural brain imaging methods due to its potential link with anxiety and depressive disorders. To date, however, we are not aware of any reports that have examined the potential relationship between HA levels and regional cortical thickness. The aim of the current study is to examine the cortical thickness which is associated with HA temperament in healthy young subjects. Methods : Twenty-eight young, healthy individuals(13 men and 15 women, mean age, $29.4{\pm}6.3$ years) were screened for eligibility and administered the Korean version of the Cloninger's Temperament and Character Inventory and underwent high-resolution structural magnetic resonance imaging scanning. Results : HA was associated with cortical thickness in the right superior frontal cortex and in the left parietal cortex, adjusted for age and sex and corrected for multiple comparisons using the permutation testing method. Conclusion : Individual temperamental differences in HA are associated with structural variations in specific areas of the brain. The fact that these brain regions are involved in top-down modulations of subcortical fear reactions adds functional significance to current findings.

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.5-15
• /
• 2007

Objective: The purpose of this study was to evaluate the mechanical performance of mini-screws during insertion into artificial bone with use of the driving torque tester (Biomaterials Korea, Seoul, Korea), as well as testing of Pull-out Strength (POS). Methods: Experimental bone blocks with different cortical bone thickness were used as specimens. Three modules of commercially available drill-free type mini-screws (Type A; pure cylindrical type, Biomaterials Korea, Seoul, Korea, Type B; partially cylindrical type, Jeil Medical, Seoul, Korea, Type C; combination type of cylindrical and tapered portions, Ortholution, Seoul, Korea), were used. Results: Difference in the cortical bone thickness had little effect on the maximum insertion torque (MIT) in Type A mini-screws. But in Type B and C, MIT increased as the cortical bone thickness Increased. MIT of Type C was highest in all situations, then Type B and Type A in order. Type C showed lower POS than Type A or B in all situations. There were statistically significant correlations between cortical bone thickness and MIT, and POS for each type of the mini-screws. Conclusion: Since different screw designs showed different insertion torques with increases in cortical bone thickness, the best suitable screw design should be selected according to the different cortical thicknesses at the implant sites.

• Journal of Biomedical Engineering Research
• /
• v.42 no.6
• /
• pp.295-303
• /
• 2021

Idiopathic normal-pressure hydrocephalus (INPH) is considered a potentially treatable neurological disorder by shunt surgery and characterized by a triad of symptoms including gait disturbance, cognitive impairment and urinary dysfunction. Although disorders of white matter are generally viewed as the principal pathological features of INPH, analysis of cortical features are important since the destruction of neural tracts could be associated with cortical structural changing. The aim of the study was to determine whether there was any relationship between gait parameter and structural features of cerebral cortex in INPH patients. Gait parameters were measured as follows: step width, toe in/out angle, coefficient of variation (CV) value of stride length, CV value of stride time. After obtaining individual brain MRI of patients with INPH and hemispheric cortical surfaces were automatically extracted from each MR volume, which reconstructed the inner and outer cortical surface. Then, cortical thickness, surface area, and volume were calculated from the cortical surface. As a result, step width was positively correlated with bilateral postcentral gyrus and left precentral gyrus, and toe in/out was positively correlated with left posterior parietal cortex and left insula. Also, the CV value of stride length showed positive correlation in the right superior frontal sulcus, left insula, and the CV value of stride time showed positive correlation in the right superior frontal sulcus. Unique parameter of cerebral cortical changes, as measured using MRI, might underline impairments in distinct gait parameters in patients with INPH.