• 센서학회지
• /
• 제30권1호
• /
• pp.10-14
• /
• 2021

Wet etching is more economical than dry etching and provides a uniform etching depth regardless of wafer sizes. Typically, potassium hydroxide (KOH) and tetra-methyl-ammonium hydroxide (TMAH) solutions are widely used for the wet etching of silicon. However, there is a limit to the wet etching process when a material deposited on an unetched surface reacts with an etching solution. To solve this problem, in this study, an apparatus was designed and manufactured to physically block the inflow of etchants on the surface using a rubber O-ring. The proposed apparatus includes a heater and a temperature controller to maintain a constant temperature during etching, and the hydrostatic pressure of the etchant is considered for the thin film structure. A corrugation membrane with a diameter of 800 ㎛, thickness of 600 nm, and corrugation depth of 3 ㎛ with two corrugations was successfully fabricated using the prepared device.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.32-39
• /
• 2023

One of the main problems faced in developing India's first HTS power cable was that of shrinkage in length of the double-walled vacuum-insulated cryostat. The shrinkage was due to the evacuation of the annular vacuum space which results in a shorter working cable length. This work reports experimentally observed contraction during evacuation and analyses corrugated pipes/bellows which house the cable core of HTS cables. The effect of corrugation geometry including length, corrugation pitch and depth, diameters of corrugated pipes and thicknesses of pipes is studied numerically to realize the degree of shrinkage due to vacuum as well as chill down. Finally, necessary length compensation and associated cost is determined to tackle the shrinkage issue.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.348-351
• /
• 2013

최근 전자파를 이용하여 두뇌를 영상화하는 시스템이 제안되고 있다. 이러한 시스템은 초광대역 특성(0.5~2 GHz)과 주빔의 방향이 모든 동작 주파수 대역에서 일정하게 유지되는 소형 안테나를 요구한다. 위의 요구 조건을 만족하기 위해서 본 논문에서는 비대칭형 corrugation들을 일반 TSA에 적용하여 안테나의 크기는 14 % 감소시키고, 요구되는 동작 주파수 대역인 0.5 GHz에서 2 GHz까지 반사 손실이 10 dB 이하의 값을 가지도록 설계하였다. 특히 대칭형 corrugation들을 적용한 TSA가 가지는 주빔의 방향이 주파수에 따라 변하는 점을 개선하였고, 이러한 비대칭형 corrugated TSA는 전자파를 이용한 두뇌 영상장치의 구현을 위해서 요구되는 조건을 모두 만족한다.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.636-641
• /
• 2012

In this study, we have investigated highly efficient nanoscale surface corrugated light emitting diodes (LEDs) for the enhancement of light extraction efficiency (LEE) of nitride semiconductor LEDs. Nanoscale indium tin oxide (ITO) surface corrugations are fabricated by using the conformal nanoimprint technique; it was possible to observe an enhancement of LEE for the ITO surface corrugated LEDs. By incorporating this novel method, we determined that the total output power of the surface corrugated LEDs were enhanced by 45.6% for patterned sapphire substrate LEDs and by 41.9% for flat c-plane substrate LEDs. The enhancement of LEE through nanoscale surface corrugations was studied using 3-dimensional Finite Different Time Domain (FDTD) calculation. From the FDTD calculations, we were able to separate the light extraction from the top and bottom sides of device. This process revealed that light extraction from the top and bottom sides of a device strongly depends on the substrate and the surface corrugation. We found that enhanced LEE could be understood through the mechanism of enhanced light transmission due to refractive index matching and the increase of light scattering from the corrugated surface. LEE calculations for the encapsulated LEDs devices also revealed that low LEE enhancement is expected after encapsulation due to the reduction of the refractive index contrast.

• 한국공간구조학회논문집
• /
• 제21권4호
• /
• pp.57-64
• /
• 2021

This paper conducted a comparative analysis of the shear buckling characteristics of trapezoidal and sinusoidal corrugated steel plates considering of their initial imperfection. Initial imperfection refers to the state where the shape of the corrugated plate is initially not perfect. As such, an initially imperfect shape was assumed using the eigen buckling mode. To calculate the buckling stress of corrugated steel plates, the linear buckling analysis used a boundary condition which was applied to the plate buckling analysis. For the comparison of trapezoidal and sinusoidal corrugation, the shape parameters were assumed using the case where the length and slope of each corrugation were the same, and the initial imperfection was considered to be from 0.1% to 5% based on the length of the steel plate. Here, for the buckling analysis, ANSYS, a commercial FEA program, was used. From the results of buckling analysis, the effect of overall initial imperfection showed that the larger the initial imperfection, the lower the buckling stress. However, in the very thin model, interaction or local buckling was dominant in the perfect shape, and in this case, the buckling stress did not decrease. Besides, the sinusoidal model showed higher buckling stress than the trapezoidal one, and the two corrugation shapes decreased in a similar way.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1439-1450
• /
• 1995

Bellows is a familiar component in piping systems as it provides a relatively simple means of absorbing thermal expansion and providing system flexibility. In routine piping flexibility analysis by finite element methods, bellows is usually considered to be straight pipe runs modified by an appropriate flexibility factor; maximum stresses are evaluated using a corresponding stress concentration factor. The aim of this study is to develop a bellows finite element, which similarly includes more complex shell type deformation patterns. This element also does not require flexibility or stress factors, but evaluates more detailed deformation and stress patterns. The proposed bellows element is a 3-D, 2-noded line element, with three degrees of freedom per node and no bending. It is formulated by including additional 'internal' degrees of freedom to account for the deformation of the bellows corrugation; specifically a quarter toroidal section of the bellows, loaded by axial force, is considered and the shell type deformation of this is include by way of an approximating trigonometric series. The stiffness of each half bellows section may be found by minimising the potential energy of the section for a chosen deformation shape function. An experiment on the flexibility is performed to verify the reliability for bellows finite element.

• 한국전산유체공학회지
• /
• 제9권2호
• /
• pp.18-22
• /
• 2004

Numerical investigation has been conducted to figure out flow behavior and pressure drop characteristics of spirally corrugated steel pipe which is widely used in civil, industrial and agricultural field owing to many advantages such as good corrosion resistance and durability, strength, easy and quick installation. Also the poly-ethylene coating spirally corrugated steel pipe has the long life under condition of sea water immerged. In the present study, flow behavior in the spirally corrugated pipe and influence of P/d/sub h/(ratio of wave pitch to hydraulic diameter) to pressure drop are investigated by CFD with various Reynolds number. And also friction factor is estimated by pressure drop obtained by flow analysis. According to computation results, the flow runs spirally up and down along the spiral corrugation in the vicinity of wall, but the effect of spiral corrugation disappears in core region of pipe. As P/d/sub h/ becomes small, more pressure drop occurs in spirally corrugated Pipe. Besides, friction factor augmentation becomes much larger as Re increases. In case of p/d/sub h/=0.38, Pressure drop and friction factor of spirally corrugated pipe are about four times larger than smooth pipe at Re: 1.46×10/sup 6/.

• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.33-40
• /
• 2003

최근 몇 년 동안 파형강관의 사용이 증가하고 있다. 예전의 연구자들은 강관의 파괴모드를 찌그러짐(crushing)이나 변형(deformation)으로 간주하였다. 그러나 강관의 직경이 커지고 두께가 얇아짐에 따라 상대적으로 작은 변형에서 좌굴이 발생하게 된다. 지중 강관의 좌굴해석에서는 두 가지가 있는데, 하나는 지반을 탄성연속체로 보는 것이고, 또 하나는 강관을 탄성스프링으로 지지한다고 가정하는 Winkler 모델이다. 이 두 가지의 해석방법은 파형을 고려하지 않는 평면해석을 기본으로 하고 있다. 본 논문에서는 좌굴해석 수행시 Winkler 모델을 기본으로 하고, 파형의 효과를 고려하는 3차원해석을 수행하여 좌굴하중에 대한 식을 제안하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.339-344
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics in wavy ducts of primary surface heat exchanger. Experiments using a naphthalene technique are carried out to determine the local transfer characteristics for flow in the corrugated wall duct. The aspect ratios of the rectangular duct cross-section are 7.3, 4.7 and 1.8 with a corrugation angle of $145^{\circ}$. The Reynolds numbers, based on the duct hydraulic diameter, are ranged from 1000 to 5000. The local heat/mass transfer measurement is conducted in the spanwise directions. The results show that Tayler-Gortler vortices exist on the pressure surface. Flow separation on the suction surface appears at a high Reynolds number resulting in a sharp decrease in the local transfer rates, but relatively high transfer rates are obtained in the reattachment region.

• 한국음향학회지
• /
• 제18권8호
• /
• pp.54-60
• /
• 1999

본 논문은 길이방향으로 조화함수 형태로 변화하는 외경을 가진 환형 단면의 탄성 실린더에서 전파하는 비틂 탄성파의 전파속도에 대한 이론적 연구 결과를 제시한다. 주기적인 미소한 외경 변화를 섭동법에 의해 다루어 전파속도의 근사해를 구하였다. 그 결과 전파속도는 외경 변화 폭의 제곱에 비례하는 양만큼 감소하는 경향이 나타났다. 이러한 이론적 결과는 앞서 보고된 실험결과와 잘 일치한다. 실린더의 두께가 얇을수록, 그리고 외경변화 빈도가 클수록 외경변화로 인한 전파속도 감소효과가 커지는 경향이 나타났다.