• 박물관보존과학
• /
• 제27권
• /
• pp.67-90
• /
• 2022

근현대 대형유물 C-46 수송기의 전시를 위해 도료분석 및 보존처리를 하였다. C-46 수송기는 우리 공군 최초의 해외 참전 항공기로서 베트남 전쟁에서 임무를 수행했다. 재질은 알루미늄이 대부분으로 표면에서는 움푹 파임(Pitting), 긁힘(Etching) 형태가 보이고 회색 또는 흰색 가루 모양의 부착물로 나타난다. 분석결과, 적색은 규조토(SiO₂·nH₂O), 백색의 이산화티탄(TiO₂), 흑색의 철흑(Fe₃0₄), 청색에서는 철단(鐵丹_ Fe₃0₄)이 혼합된 퍼티를 사용했다. 적외선 분광분석 결과는 알키드 수지(Alkyd Resin), 태극무늬 부분은 니트로셀룰로오스계 도료가 사용되었다. 처리는 샌딩 및 세척 등 기계적, 화학적 용제로 부식물을 제거하고 도료 도포 등을 진행하였다. 도료분석과 보존처리를 통하여 안정한 상태로 전시에 활용할 수 있도록 하였다.

• 대한수의학회지
• /
• 제6권1호
• /
• pp.57-75
• /
• 1966

This study was conducted to observe the condition of the ramifications of the bronchus and pulmonary blood vascular system by injecting the vinylite into the bronchial tree and pulmonary blood vessels in 100 normal adult dogs. The results obtained were summarized as follows: 1. Lungs of dog were composed of the same pulmonary territories as in lungs of human. 2. Cardiac lobe corresponding to R.medio-bassalis of human lungs was well developed and situated as a independent cardiac lobe, in ventral side of right lung. 3. Bronchial tree were in the patterns of axial divergency and blood vascular systems were (in general) branched along the bronchial tree, arteries lying near the bronchial tree but veins apart from it. 4. Among the branching patterns of bronchus pulmonary artery and pulmonary vein in each lobe, the type presented most frequently were noted, which were designated basic type by the author. 5. Pulmonary blood vessels were not always branched in accordance with bronchial tree, diverged inmore complex patterns, especially in venous vascular system. 6. Ramus anterior (lobe apicalis) was always observed in all casting specimen. 7. There was a case of peculiar variation patterns of the ramification in the bronchi directing into the left apical and cardiac lobe, arose respectivelly, at independent origin of bifurcation in the left bronchial stem, and a case of peculiar variation pattern of the artery entering left apical lobe and cardiac lobe, had a same origin of the bifurcation at rami pulmonary artery, and then divided respectivelly into the rami medi artery and rami left apical lobe artery. 8. In the classification based on the patterns of bronchial and blood vasculor divergencys, there were a lot of significant combination cases in their patterns.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.44-48
• /
• 1998

Scanning Electron Microscopy with Polarization Analysis (SEMPA) was used to image the surface magnetic domain structure of the 100 ${\mu}{\textrm}{m}$ thick 3% Si-Fe sheet. The thin-gauged 3% Si-Fe strips with magnetic induction ($B_{10}$) from 1.98 to 1.57 Tesla were prepared via conventional metallurgical processes including melting, hot-and cold-rolling, intermediate annealing and final annealing. Using SEMPA, it was observed that the $B_{10}$ (1.98 T) Tesla sample was almost composed of 180$^{\circ}$ stripe domains which are parallel to rolling direction. On the other hand the 3% Si-Fe sheet with $B_{10}$ (1.57 T) Tesla was composed of large 180$^{\circ}$stripe domains that are slanted about 30$^{\circ}$to the rolling direction and complex magnetic domain structures like tree and zigzag pattern. The 180$^{\circ}$stripe domains, which covered a major part of the sample, had (110)<001> Goss texture parallel to the rolling direction. The domain walls between 180$^{\circ}$stripe domains were the conventional Bloch type walls. On the other hand, the 90$^{\circ}$domains, which covered minor part on edge of the sample, were observed in (200) grains. The domain walls between 90$^{\circ}$domains were the Neel type walls. In high magnification, the elliptical singularity at the Neel walls was clearly observed.

• 콘크리트학회논문집
• /
• 제26권3호
• /
• pp.299-306
• /
• 2014

콘크리트 구조물의 철근 부식 문제를 해결하기 위하여 코팅철근이 사용된다. 에폭시 코팅 철근에 비해 아연코팅철근의 콘크리트 보의 휨 거동 영향에 대한 자료는 거의 없는 실정이다. 이 연구의 목적은 아연코팅철근이 콘크리트 보의 휨 거동에 미치는 영향을 파악하는 데 있다. 아연코팅철근을 사용한 부재와 일반철근을 사용한 부재의 구조실험을 통하여 휨 거동 특성을 비교하였다. 실험변수로써 철근의 아연코팅 유무, 사용 철근비와 피복 두께를 고려하였다. 아연코팅철근 콘크리트 보의 균열패턴, 균열폭, 처짐 및 변형률 특성을 파악하였다. 아연코팅철근 콘크리트 보의 휨강도는 일반철근 콘크리트 보의 휨강도와 거의 차이가 나지 않는다. 철근표면의 아연코팅은 처짐, 균열폭 비교 결과에도 뚜렷한 영향을 미치지 않는다. 또한, 아연코팅철근 보와 일반철근 보의 하중-변형률 곡선은 비슷한 결과를 나타낸다. 따라서, 전반적으로 아연코팅철근의 사용은 일반철근을 사용할 때에 비해 콘크리트 보의 휨 거동에 악영향을 미치지는 않는 것으로 나타난다.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.313-324
• /
• 2011

Several complaints from consumers on red or turbid waters were often filed at the same places although various efforts were made to improve water quality in the drinking water plant. The red water problems were occurred due to corrosion of main water pipe, especially at extremity. The low concentrations of chlorine indicating poor water quality were detected at the problematic location. To solve the poor water quality at the extremity, flushing techniques, i.e., conventional flushing, unidirectional flushing, and continuous flushing, were recently practiced. In this study, effects of conventional flushing on water qualities were examined by comparing turbidity and residual chlorine before and after flushing. In addition, more detailed analyses on water qualities at the tap water were conducted to learn a reduction pattern during flushing. Five items from geographic information system of water distribution were used to obtain a relationship with water quality, washing duration or amounts of washing water. The flushing was effective to meet the National Drinking Water Quality Standard with simple and relatively short time operation. The key operational parameter in flushing was amounts of washing water which should be estimated based on water quality of the consumer's tap water. The positive relationship between the residual chlorine and pipe length implied that detention time in the pipeline was the main cause of the complaints. More experiments on effectiveness of flushing are needed to determine reasonable strategies of flushing.

• 한국터널지하공간학회 논문집
• /
• 제13권3호
• /
• pp.199-214
• /
• 2011

균열, 누수, 박락, 철근노출, 부식, 탄산화 등은 터널 라이닝 건전도 평가항목으로 그 중에서 균열은 주요한 영향요인이다. 1980년 이후로, NATM은 터널의 굴착방법과 링폐합의 지반공학적 개념의 보급과 함께 넓게 적용되었으며, 라이닝에 발생된 균열의 연구도 진행되었으나 종균열에 제한된 연구가 주로 수행되었다. 본 논문에서는 11개의 공용중인 NATM터널의 정밀안전진단 결과를 활용하여 공간적인 위치 및 형태별로 분석하여 터널별 공통된 7개의 균열을 정의, 원인 및 분석, 사례 등을 나타내었다. 종류별 균열은 CCD스캐너 이미지를 3차원으로 분석하여 향후 NATM터널 정기점검 및 정밀안전진단 시 유익한 사례가 휠 수 있도록 하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권4호
• /
• pp.136-143
• /
• 2015

용융아연도금(galvanizing)은 콘크리트 구조물의 철근 부식 문제를 해결하기 위해 사용된다. 용융아연도금 철근 콘크리트 보의 부착강도 영향에 대한 자료는 거의 없는 실정이다. 따라서, 이 연구의 목적은 용융아연도금철근이 콘크리트 보의 부착강도에 미치는 영향을 파악하는데 있다. 용융아연도금철근을 사용한 부재와 일반철근을 사용한 부재의 구조실험을 통하여 겹침이음 거동과 부착강도 특성을 비교하였다. 실험변수로써 철근의 용융아연코팅 유무, 철근 직경과 겹침이음 길이를 고려하였다. 용융아연도금 철근콘크리트 보의 균열 및 파괴 특성을 파악하였다. 용융아연도금철근 콘크리트 보의 겹침이음부 휨 거동특성은 일반철근 콘크리트 보의 겹침이음부 휨거동과 유사한 것으로 나타난다. 또한, 용융아연도금철근의 사용은 일반철근을 사용할 때에 비해 콘크리트 보의 부착강도에 불리한 영향을 미치지는 않는 것으로 나타났다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.207-210
• /
• 2017

The suspension arrangement of insulators provides flexibility and assists in power transmission in transmission lines. The performance of the insulator string is strongly influenced by the environmental conditions to which it is exposed, its shape and the inherent material properties of suspension-type insulators. The suspension-type insulators are mostly made from glass, porcelain and ceramic material due to their high resistivity. Irregularity in charge distribution throughout the porcelain insulator may lead to accelerated aging and electrical breakdown. A very high and steep lightning impulse voltage may also cause breakdown of suspension-type insulators. We investigated various material characteristics such as alumina addition, surface morphology, x-ray diffraction pattern and relative density of suspension porcelain insulators manufactured in 1989 (36,000 lbs.), 1995 (36,000 lbs.) and 2001 (36,000 lbs.) by the KRI Company for use in 154 kV high power transmission lines. We compared the material characteristics of these porcelain insulators with that of the top-of-the-line porcelain insulators (36,000 lbs.) manufactured by the NGK Company in 2000. These suspension-type porcelain insulators were exposed to arc and flashover tests to examine their electrical and mechanical strength. It was noted that alumina addition (17 wt.%) for K-2001 was one of the major contributors to the enhancement of the performance of the porcelain insulators and to their ability to withstand very high current generation during the arc test. The porcelain insulators manufactured during 2001 also showed the highest relative density of 95.8% as compared to the other insulators manufactured in 1989 and 1995 respectively 94.2% and 91.5%. We also discuss reports of various failure modes of suspension-type porcelain insulators.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.448-448
• /
• 2010

Magnetic random access memory (MRAM) has made a prominent progress in memory performance and has brought a bright prospect for the next generation nonvolatile memory technologies due to its excellent advantages. Dry etching process of magnetic thin films is one of the important issues for the magnetic devices such as magnetic tunneling junctions (MTJs) based MRAM. CoFeB is a well-known soft ferromagnetic material, of particular interest for magnetic tunnel junctions (MTJs) and other devices based on tunneling magneto-resistance (TMR), such as spin-transfer-torque MRAM. One particular example is the CoFeB - MgO - CoFeB system, which has already been integrated in MRAM. In all of these applications, knowledge of control over the etching properties of CoFeB is crucial. Recently, transferring the pattern by using milling is a commonly used, although the redeposition of back-sputtered etch products on the sidewalls and the low etch rate of this method are main disadvantages. So the other method which has reported about much higher etch rates of >$50{\AA}/s$ for magnetic multi-layer structures using $Cl_2$/Ar plasmas is proposed. However, the chlorinated etch residues on the sidewalls of the etched features tend to severely corrode the magnetic material. Besides avoiding corrosion, during etching facets format the sidewalls of the mask due to physical sputtering of the mask material. Therefore, in this work, magnetic material such as CoFeB was etched in an ICP etching system using the gases which can be expected to form volatile metallo-organic compounds. As the gases, carbon monoxide (CO) and ammonia ($NH_3$) were used as etching gases to form carbonyl volatiles, and the etched features of CoFeB thin films under by Ta masking material were observed with electron microscopy to confirm etched resolution. And the etch conditions such as bias power, gas combination flow, process pressure, and source power were varied to find out and control the properties of magnetic layer during the process.

• 해양환경안전학회지
• /
• 제25권1호
• /
• pp.122-129
• /
• 2019

신조 방식의 제조업의 특성상 경기 사이클이 존재하기 때문에, 장기적으로 이를 대처할 동반 산업이 절실하게 필요로 하고 있다. 이러한 요구에 적합한 분야가 수리조선업 분야이다. 수리조선업을 운영하기 위해서는 플로팅도크가 필수적으로 필요로 하며, 대부분 노후화된 플로팅도크를 해외로부터 수입한 후, 개/보수를 통하여 운용하고 있다. 그러나, 사용연한이 최소 30년 이상이고, 운용 시 특정 선급에 입급을 시키지 않기 때문에, 안전성에 대한 정확한 지침은 전무한 상태이다. 본 연구에서는 노후화된 플로팅도크의 계측한 두께 정보를 활용하여, 구조강도 검토를 수행하고, 운용중인 플로팅도크의 잔류 구조강도를 분석하였다. 연구를 통하여 도출된 주요 결과들은 유사 설비의 구조 안전성 검토에 대한 가이드라인을 참조할 수 있으며, 개/보수 시 이러한 방법을 활용하면 빠른 시간 내에 최적 해를 찾을 수 있을 것으로 기대된다.