• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.17-23
• /
• 2009

노상토의 변형특성은 포장설계에 있어서 매우 중요한 기본적인 입력물성치다. 노상토의 탄성계수를 실험적으로 결정하기 위해서는 많은 노력이 필요하다. 포장 단면이 간단하거나 중요도가 낮은 도로 설계의 경우 시험적인 탄성계수 결정이 과다한 비용을 요구하게 된다. 보다 간편한 대체시험 또는 기초물성치로부터 탄성계수를 결정하는 다양한 경험모형이 제안되어 있다. 본 연구에서는 7종의 국내 노상토에 대한 시험을 수행하였다. 국내 노상토의 경우 강도특성과 변형특성의 밀접한 상관성을 확인 하였으며, 경험적 상관모형을 제안하였다. 점착력과 낮은 구속응력단계에서의 탄성계수는 매우 큰 상관관계가 있었다($r^2=0.93$). 제안된 상관모형을 적용하여 강도특성으로부터 추정된 탄성계수와 시험을 통하여 측정된 탄성계수의 비교에서 결정계수($r^2$)는 0.75로 나타났다.

• ETRI Journal
• /
• 제30권6호
• /
• pp.765-773
• /
• 2008

Spatial correlation is a result of insufficient antenna spacing among multiple antenna elements, while temporal correlation is caused by Doppler spread. This paper compares the effect of spatial and temporal correlation in order to investigate the performance of multiuser scheduling algorithms in multiple-input multiple-output (MIMO) broadcast channels. This comparison includes the effect on the ergodic capacity, on fairness among users, and on the sum-rate capacity of a multiuser scheduling algorithm utilizing statistical channel state information in spatio-temporally correlated MIMO broadcast channels. Numerical results demonstrate that temporal correlation is more meaningful than spatial correlation in view of the multiuser scheduling algorithm in MIMO broadcast channels. Indeed, the multiuser scheduling algorithm can reduce the effect of the Doppler spread if it exploits the information of temporal correlation appropriately. However, the effect of spatial correlation can be minimized if the antenna spacing is sufficient in rich scattering MIMO channels regardless of the multiuser scheduling algorithm used.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.681-689
• /
• 1994

A model to predict the onset of significant void (OSV) in vertical flow between parallel plates has been developed. The model was compared to the experimental data of Whittle and Forgan (1967) and Dougherty et al. (1990), showing excellent agreement. The model was also compared with the Saha-Zuber(1974) correlation, which has been widely used in computer codes for nuclear safety analysis. The present theory is more conservative than this correlation, and further shows that, contrary to this correlation, the Stanton number is not solely related to the Peclet number. This may explain the large error margins required for the Saha-Zuber correlation, and also the scatter beyond the error margins specified by the authors. The steady-state OSV heat fluxes for equal and unequal heating cases between parallel plates were compared. The arithmetic mean of heat fluxes for unequal heating cases is less than the heat flux for equal heating cases. The result may imply that OSV is controlled by local thermal parameters rather than bulk parameters.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.187-201
• /
• 2009

Semiconductor industry is based on equipment industry and timing industry. In particular, semiconductor process is very complex and as semiconductor-chip width tails and is becoming equipment gradually more as a high technology. Equipment operation is primarily engaged in semiconductor manufacturing (engineers and operator) of being conducted by, equipment errors have also been raised. Equipment operational data related to the error of korea occupational safety and health agency were based on data and production engineers involved in the operator's questionnaire was drawn through the error factor. Equipment operating in the error factor of 9 big item and 36 detail item detailed argument based on the errors down, and 9 big item the equipment during operation of the correlation error factor was conducted. Each of the significance level was correlated with the tabulation and analysis. Using the maximum correlation coefficient, the correlation between the error factors to derive the relationship between factors were analyzed. Facility operating with the analysis of error factors (big and detail item) derive a relationship between the model saw. The end of the operation of the facility in operation on the part of the two factors appeared as prevention. Safety aspects and ergonomics aspects of the approach should be guided to the conclusion.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.461-470
• /
• 2014

This paper presents a probabilistic power flow (PPF) analysis method for distribution network incorporating the randomness and correlation of photovoltaic (PV) generation. Based on the multivariate kernel density estimation theory, the probabilistic model of PV generation is proposed without any assumption of theoretical parametric distribution, which can accurately capture not only the randomness but also the correlation of PV resources at adjacent locations. The PPF method is developed by combining the proposed PV model and Monte Carlo technique to evaluate the influence of the randomness and correlation of PV generation on the performance of distribution networks. The historical power output data of three neighboring PV generators in Oregon, USA, and 34-bus/69-bus radial distribution networks are used to demonstrate the correctness, effectiveness, and application of the proposed PV model and PPF method.

• Communications for Statistical Applications and Methods
• /
• 제10권2호
• /
• pp.585-594
• /
• 2003

It has been generally recognized that conventional binomial or Poisson model provides poor fits to the actual correlated binary data due to the extra-binomial variation. A number of generalized statistical models have been proposed to account for this additional variation. Among them, beta-binomial, correlated-binomial, and modified-binomial models are binomial-related models which are frequently used in modeling the sum of n correlated binary data. In many situations, it is reasonable to assume that n correlated binary data are exchangeable, which is a special case of correlated binary data. The sum of n exchangeable correlated binary data is modeled relatively well when the above three binomial-related models are applied. But the estimation results of correlation coefficient turn to be quite different. Hence, it is important to identify which model provides better estimates of model parameters(success probability, correlation coefficient). For this purpose, a small-scale simulation study is performed to compare the behavior of above three models.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.1-10
• /
• 2001

As computer power is increased, refined finite element models are employed for structural analysis. However, it is difficult and expensive to use refined models in the design stage. The refined models especially cause problems in the preliminary design where the design is frequently changed. Therefore, simplified models are needed. The simplification process is regarded as an empirical technique. Simplified and equivalent finite element model of a structure has been studied and used in the preliminary design. A general approach to establish the simplified and equivalent model is presented. The generated simple model has satisfactory correlation with the corresponding refined finite element model. An optimization method, the Goal Programming algorithm is used to make the simple model. The simplified model is used for the design change and the changed design is recovered onto the original design. The presented method was verified with three examples.

• 대한화학회지
• /
• 제57권3호
• /
• pp.370-376
• /
• 2013

A back propagation artificial neural network model with one hidden layer is established to correlate the liquid-liquid equilibrium data of hydrocarbon-water systems. The model has four inputs and two outputs. The network is systematically trained with 48 data points in the range of 283.15 to 405.37K. Statistical analyses show that the optimised neural network model can yield excellent agreement with experimental data(the average absolute deviations equal to 0.037% and 0.0012% for the correlated mole fractions of hydrocarbon in two coexisting liquid phases respectively). The comparison in terms of average absolute deviation between the correlated mole fractions for each binary system and literature results indicates that the artificial neural network model gives far better results. This study also shows that artificial neural network model could be developed for the phase equilibria for a family of hydrocarbon-water binaries.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.50-58
• /
• 2006

Free running model tests gives us only maneuvering indices not hydrodynamic derivatives. For this reason, system identification method has been applied to the measured data to identify mathematical model describing hydrodynamic force. However It is difficult to obtain complete set of maneuvering derivatives because of strong correlation of sway velocity and yaw rate. Therefore, in this paper, we assumed that sway velocity related coefficients would be obtained by oblique towing test. and then proposed new procedure to estimate yaw related coefficients. To do this, correlation and regression analyses were carried out to establish modified model and estimate maneuvering derivatives. Also D-optimal rudder input scenario was found based on the modified model and confirmed the validity of its sufficient richness as a input scenario.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권12호
• /
• pp.1678-1684
• /
• 2006

The objectives of this study were to estimate genetic parameters and sire breeding values for average daily gain (ADG) and carcass traits using sire-maternal grandsire model with REML approach, sire model with REML approach, sire model without relationships among sires and with REML and ANOVA approach, and to investigate advantages and disadvantages of these methods. Data were collected from 42,325 Japanese Black steers and heifers finished and slaughtered from 1991 to 2004. Traits analyzed in this study were average daily gain (ADG) during the fattening period, live weight at slaughter (LW), cold carcass weight (CW), estimated lean yield percentage (LYE), longissimus muscle area (LMA), subcutaneous fat thickness (SFT), rib thickness (RT), and marbling score (BMS). Bivariate analyses were also performed to obtain genetic and phenotypic correlation coefficients among traits. Estimated breeding values were obtained from each model, and simple and rank correlations among breeding values from each model were calculated. Estimates of heritability using the four models ranged from 0.25 to 0.31 in ADG, from 0.21 to 0.24 in LW, from 0.23 to 0.27 in CW, from 0.10 to 0.17 in DP, from 0.40 to 0.42 in LYE, from 0.19 to 0.31 in LMA, from 0.31 to 0.34 in SFT, from 0.26 to 0.33 in RT, and from 0.18 to 0.44 in BMS. The differences in heritability estimates using the four models seemed to be feasible in ADG, CW, DP, LMA, RT, and BMS. Genetic correlation coefficients of ADG with CW, SFT, RT and BMS were moderate to high and positive while the genetic correlation coefficients between ADG and LYE was low and negative. Correlation coefficients of BMS with SFT were negligible for both genetic and phenotypic correlations. The correlations of estimates evaluated from sire models with those from sire-maternal grandsire model were not large enough to convincing that breeding values using a sire model were corresponding to those using a sire-maternal grand sire model. If information of maternal grand sires are not available, the sire model with incomplete pedigree information included only sire of sire (Model 2) is optimal among the sire models evaluated in this study.