• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.59-66
• /
• 2000

This study describes the precise DTM by image processing method through scanning the positive film of aerial photo using scanner instead of plotter. First, scanned the positive film of aerial photo by drum scanner and flatbed scanner in different resolution, and then compared the height from image processing method using auto correlation method with height which is taken using $50^m{\times}50^m$ grid in 1 :5,000 geographical map. It shows that heights from aerial photo image of high resolution obtained from scanner are comparable to the heights from 1：5,000 geographical map.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.115-115
• /
• 1999

To demonstrate the applicability of RELAP5 to the prediction of the onset offlooding in the hot leg at the reflux condensation phase during mid-loop operation, numerical analysis is performed for the counter-current flow in a horizontal pipe with the inclined riser using the RELAP5/MOD3.2.2b code. It is found that the RELAP5, simulating the CCFL phenomena using interfacial friction along with the flow regime map in the horizontal pipe, produces unsatisfactory results. Under the CCFL condition, it is observed that large oscillation exists in the flow rate, void fraction, and etc. and the liquid flow rate is much lower than that predicted by the CCFL model measured in the experiment. The CCFL model of RELAP5 for the vertical volume is extended to the model for the horizontal and inclined volumes. The horizontal volume flow regime map and interfacial friction model coupled to the CCFL model are modified. And a new correlation developed from Kang's experiment is implemented to the CCFL model of RELAP5. With this modified RELAP5, the analysis of CCFL phenomena in the horizontal pipe and hot leg geometry is performed, and produces reasonable results in comparison with experimental data.

• Economic and Environmental Geology
• /
• v.25 no.2
• /
• pp.145-151
• /
• 1992

In order to study the optimum depth for the soil geochemical exploration in the area which is affected by agricultural activities and waste disposal of metal mine, the soil samples were sampled from the B layer of residual soil and vertical 7 layers up to 250 cm in the rice field and 3 layers up to 90 cm in the ordinary field. They were analyzed for Au, As, Cu, Pb and Zn by AAS, AAS-graphite furnace and ICP. To investigate the proper depth for the soil sampling in the contaminated area, the data were treated statistically by applying correlation coefficient, factor analysis and trend analysis. It is conclude that soil geochemical exploration method could be applied in the farm-land and a little contaminated area. The optimum depth of soil sampling is 60 cm in the ordinary field, and 150~200 cm in the rice field. Soil sampling in the area of a huge mine waste disposal is not recommendable. Plotting of geochemical map with factor scores as a input data shows a clear pattern compared with the map of indicater element such as As or Au. The second or third degree trend surface analysis is effective in inferring the continuity of vein in the area where the outcrop is invisible.

• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.33-40
• /
• 2020

The research topics of more than 1,900 wind energy papers registered in the Korean Journal Citation Index (KCI) were modeled into 25 topics using latent directory allocation (LDA), and their consistency was cross-validated through principal component analysis (PCA) of the document word matrix. Key research topics in the wind energy field were identified as "offshore, wind farm," "blade, design," "generator, voltage, control," 'dynamic, load, noise," and "performance test." As a new method to determine the similarity between research topics in journals, a systematic evaluation method was proposed to analyze the correlation between topics by constructing a journal-topic matrix (JTM) and clustering them based on topic similarity between journals. By evaluating 24 journals that published more than 20 wind energy papers, it was confirmed that they were classified into meaningful clusters of mechanical engineering, electrical engineering, marine engineering, and renewable energy. It is expected that the proposed systematic method can be applied to the evaluation of the specificity of subsequent journals.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.423-430
• /
• 2023

One recent notable method for real-time elimination of ionospheric errors in geodetic applications is the Predicted Global Ionosphere Map (PGIM). This study analyzes the level of accuracy achievable when applying the PGIM provided by the Center for Orbit Determination of Europe (CODE) to the Korean Peninsula region. First, an examination of the types and lead times of PGIMs provided by the International GNSS Service (IGS) Analysis Center revealed that CODE's two-day prediction model, C2PG, is available approximately eight hours before midnight. This suggests higher real-time usability compared to the one-day prediction model, C1PG. When evaluating the accuracy of PGIM by assuming the final output of the Global Ionosphere Map (GIM) as a reference, it was found that on days with low solar activity, the error is within ~2 TECU, and on days with high solar activity, the error reaches ~3 TECU. A comparison of the errors introduced when using PGIM and three solar activity indices-Kp index, F10.7, and sunspot number-revealed that F10.7 exhibits a relatively high correlation coefficient compared to Kp-index and sunspot number, confirming the effectiveness of the prediction model.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.187-193
• /
• 2015

The purpose of the present study is to trace the provenance of lead raw materials using the lead isotope ratio of 9 lead glasses excavated from the Sarira hole of Mireuksaji stone pagoda and to determine correlation between them and other lead glasses excavated from the Wanggungri site. The results of chemical analysis of the 9 lead glasses show that they are common lead glass system($PbO-SiO_2$) with respect to the contents of PbO (70 wt.%) and $SiO_2$ (30 wt.%). The lead isotope ratios of them plot to northern Korean peninsula when applied to the distribution map of lead isotopes of East Asia. On the other hand, southern Korean peninsula is verified as the main deposits of the lead ore in the distribution map of lead isotopes of South Korea. With respect to the results, it is notable that the provenance of the 9 lead glasses can be very different depending on the distribution map. In addition, a comparative study between them and the lead glasses excavated from the Wanggungri which was built in the same region and period shows that their lead isotopes are highly correlated.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.4 no.3
• /
• pp.217-227
• /
• 2002

Geostatistical methods were used for the groundwater flow analysis on the ${\bigcirc}{\bigcirc}$ tunnel area. Linear regression analysis shows that the topographic elevation and ground water level of this area have very high correlation. Groundwater-level contour maps produced by ordinary kriging and cokriging have little differences in mountain areas. But, comparing two maps on the basis of an elevation contour map, a groundwater-level contour map using cokring is more accurate. Analyzing the groundwater flow on two groundwater-level contour maps, the groundwater of study area flows from the north-west mountain areas to near valleys, and from the peak of the mountain to outside areas. In the design steps, the groundwater-level distribution is reasonably considered in the tunnel construction area by cokriging approach. And, geostatistics will provide quantitative information in the unknown groundwatrer-level area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.718-721
• /
• 2011

In this paper, cross ambiguity function map is proposed to estimate the location of a unknown interferer which emits the harmful radio in the satellite communication network. To estimate the interferer, a time difference between received radio signals at earth stations and a frequency difference caused by the movement of interferers or receiving earth stations are calculated. Therefore, cross ambiguity function is used to calculate that values. The calculating process of the time and the frequency differences using cross ambiguity function is operated at every designated time then the correlation values between the time and frequency are calculated. After calcuation, the final location of the harmful interferer is estimated. From the simulation results, about 800 m distance error is occurred at 10~4 dB of $E_b/N_0$ and about 13 km distance errer is occurred at -20 dB of $E_b/N_0$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.2
• /
• pp.67-73
• /
• 2005

The thickness of a Si3N4 thin film with a 100m nominal thickness was measured by use of a Mach-Zehnder interferometer. The map of the phase-delay through the thin film was obtained by an interframe intensity-correlation-matrix method that could elliminate phase-shifting errors. After the spatial phase-shifting errors were treated with a least-squares method, the reference to surface of the phase map was estimated. The overall accuracy of the method was found to be 5nm.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.13-27
• /
• 1997

For the National Geo-Spatial Information System the development of the National Digital Basemap database is actively underway in Korea. For the National Digital Basemap database to be truly useful for various applications development it is essential to maintain its reliability. To maintain the reliability of the database it is necessary to understand the nature and the frequency of the errors in it. In general, a data inspection under the standardized quality control process is required to maintain the quality of a large database. In addition, it is important to maintain complete and detailed records of the inspection results so as to understand the relationship between the m and other factors causing errors. These records can be used as a reference for map updates and future application development. The goal of this study is to count the frequency of errors based on the typology of errors found in the digitized map inspection process and to analyze the correlation between errors and topographic composite quotient This study also provides guidelines for the inspection process regarding the error-prone cartographic elements in the digital map generation process.