• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.263-266
• /
• 2000

Effects of excess Pb(50 mole ％) on the crystallization properties of amorphous PZT thin films on the glass substrates by post-annealing in oxygen ambient were investigated to lower the crystallization temperature of the PZT thin films with a single perovskite phase. The PZT thin films(350nm) were prepared on Pt/Ti/corning glass(1737) substrates. The PZT thin films and bottom electrode were deposited by RF magnetron sputtering. Crystallization properties of PZT thin films were strongly dependent on RTA(Rapid Thermal Annealing) temperature. We were able to obtain a perovskite structure of PZT at 600$^{\circ}C$ for 10min. After thermal treatments were done, electrical properties such as I-V, P-E, and fatigue were measured.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.832-835
• /
• 2005

Organosilicate Glass has quite a long history in the Semiconductor industry but has received very limited evaluation for Display industry applications. In this paper, we would like to introduce several kinds of Organosilicate Glasses for Display applications.

• 한국재료학회지
• /
• 제24권3호
• /
• pp.123-128
• /
• 2014

To realize high-performance thin film solar cells, we prepared CIGS by the co-evaporation technique on both sodalime and Corning glass substrates. The structural and efficient properties were investigated by varying the thickness of the Mo:Na layer, where the total thickness of the back contact was fixed at 1${\mu}m$. As a result, when the Mo:Na thickness was 300 nm on soda-lime glass, the measured Na content was 0.28 %, the surface morphology was a plate-like compact structure, and the crystallinity by XRD showed a strong peak of (112) preferential orientation together with relatively intense (220) and (204) peaks as the secondary phases influenced crystal formation. In addition, the substrates on soda-lime glass effected the lowest surface roughness of 2.76 nm and the highest carrier density and short circuit current. Through the optimization of the Mo:Na layer, a solar conversion efficiency of 11.34% was achieved. When using the Corning glass, a rather low conversion efficiency of 9.59% was obtained. To determine the effects of the concentration of sodium and in order to develop a highefficiency solar cells, a very small amount of sodium was added to the soda lime glass substrate.

• 한국자기학회지
• /
• 제9권5호
• /
• pp.245-250
• /
• 1999

기판/Py/Al2O3/Co(Py=Ni81Fe19) 터널접합의 TMR(Tunneling Magnetoresistance)에 미치는 기판과 부도체층의 효과를 보기위해 산화시간을 변화시키고 기판의 종류를 변화시켜며 전기적 특성을 측정하였다. 시료는 진공중에서 in-situ로 새도우마스크를 교환하며 제작하였다. 산화시간의 증가에 따라 터널접합의 저항은 증가하였으며 측정된 MR 값은 감소하였다. 터널 비저항이 0.17 M$\Omega$($\mu\textrm{m}$)2이하인 경우 MR이 관측되었다. 기판의 종류에 따른 MR 값은 열산화시킨 Si(111), Si(100), Cornng Glass 2948, Corning Glass 7059 순으로 감소하였다. MR 값의 부호와 변화를 불균일 전류의 흐름으로 설명하였다.

• 마이크로전자및패키징학회지
• /
• 제5권2호
• /
• pp.53-58
• /
• 1998

Sintering and dielectric characteristics of substrates were estimated by mixing rate of alumina and potashborosilicate glass(PBSG) powders. PBSG powders were used 7761(corning code)and alumina powders were used in extra pure rate(99.9%) and had 0.1 ${\mu}$m mean size. After ball milling with organic additives green sheets which were casted by doctor blade machine were sintered at 800$^{\circ}C$ for 1∼3hrs. Microstructure, linear shrinkage and dielectric constant of substrates were surveyed in order to fabricate low-dielectric and low tem-perature sintering substrate.

• 한국결정학회지
• /
• 제11권3호
• /
• pp.167-172
• /
• 2000

CaTiO₃:Pr phosphor thin films were prepared on Si(100), ZnO/glass, Corning glass and ITO/glass by rf magnetron reactive sputtering. The effects of deposition parameters such as oxygen partial pressure, substrate temperature, and annealing conditions on crystallinity and compositional variation of the films were investigated. PL spectra of CaTiO₃:Pr phosphor thin films exhibited red regime peaking at 613 nm and enhanced PL intensity was observed for the film annealed in vacuum atmosphere as compared to the deposit annealed in N₂ environment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.223-226
• /
• 2004

본 연구는 램제트 돔 포트 커버용 글라스 세라믹의 기계적 특성, 정적 및 동적 파괴인성을 평가하기 위해 수행하였다. 램제트 추진기관의 돔 포트 커버의 재료로 MACOR 글라스 세라믹 9658을 선정하였으며, 취성재료인 글라스 세라믹의 파괴인성을 측정하기 위해 노치시편에 대한 정적 및 동적 파괴인성시험을 수행하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.112-115
• /
• 2005

본 연구는 램제트 엔진의 돔포트 커버의 소재로 사용 될 첨단 그라스 세라믹(MACOR) 소재에 대한 동적 파괴인성 시험을 목적으로 한다. 다양한 노치반경의 시험편에 대하여 스트레인게이지법을 사용한 정적과 동적 파괴인성 시험을 수행하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권1호
• /
• pp.24-29
• /
• 2001

PZT thin films(4000A) have prepared onto 1737 corning glass and ITO coated glass substrates with a RF magnetron sputtering system using Pb_{1.05}(Zr_{0.52},Ti_{0.48})O_3$ceramic target, Electrical properties of PZT thin film deposited after ITO coated glass were P${\gamma}$ was decreased by 25% after 109cycles, respectively. With the RTA treatment duration and temperature increased, the crystallization of PZT thin films were enhanced, however, the leakage current density became higher. The leakage current mechanism was found to be space charge conduction by the defects and oxygen vacancies existing in PZT and PZT/bottom electrode interfaces.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.922-925
• /
• 2012

Single crystalline Au nanowires were successfully synthesized in a tube-type furnace. The Au nanowires were grown by vapor phase synthesis technique using solid-liquid-solid (SLS) mechanism on substrates of corning glass and Si wafer. Prior to Au nanowire synthesis, Au thin film served as both catalyst and source for Au nanowire was prepared by sputtering process. Average length of the grown Au nanowires was approximately 1 ${\mu}m$ on both the corning glass and Si wafer substrates, while the diameter and the density of which were dependent on the thickness of the Au thin film. To induce a super-saturated states for the Au particle catalyst and Au molecules during the Au nanowire synthesis, thickness of the Au catalyst thin film was fixed to 10 nm or 20 nm. Additionally, synthesis of the Au nanowires was carried out without introducing carrier gas in the tube furnace, and synthesis temperature was varied to investigate the temperature effect on the resulting Au nanowire characteristics.