• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.286-292
• /
• 2020

Imaging through multicore fiber (MCF) is of great significance in the biomedical domain. Although several techniques have been developed to image an object from a signal passing through MCF, these methods are strongly dependent on the surroundings, such as vibration and the temperature fluctuation of the fiber's environment. In this paper, we apply a new, strong technique called deep learning to reconstruct the phase image through a MCF in which each core is multimode. To evaluate the network, we employ the binary cross-entropy as the loss function of a convolutional neural network (CNN) with improved U-net structure. The high-quality reconstruction of input objects upon spatial light modulation (SLM) can be realized from the speckle patterns of intensity that contain the information about the objects. Moreover, we study the effect of MCF length on image recovery. It is shown that the shorter the fiber, the better the imaging quality. Based on our findings, MCF may have applications in fields such as endoscopic imaging and optical communication.

• Journal of Korean Society of Forest Science
• /
• v.37 no.1
• /
• pp.17-30
• /
• 1978

Press drying was used on italian poplar (Populus euamericana) to find the profitable means of drying. This study was designed to investigate the process of platen drying considering core temperature, drying time, current moisture content, drying rate, shrinkage and recovery, and green volume specific gravity, equilibrium moisture content and dimensional stability of press dried material and air dried material, The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$. The results were summarized as follows. 1. Core temperature was divided into three stages of drying characterized by period initial heating, plateau temperature and rising core temperature. Plateau temperature was 114 to $119^{\circ}C$. 2. The following predicting equations of drying time(y) in different core temperatures were developed for initial thickness($x_1$), initial moisture content ($x_2$) and final moisture content ($x_3$) 3. The predicting equaltion of current moisture content(u) was log u=4.658-0.060t as funtion of drying time(t) and that of drying rate(r) was log r=-2.797-0.049t. Current moisture content and drying rate of air drying were shown in figure 2. 4. The predicting equation of shrinkage in thickness direction(y) was log y=1.933+0.038t as function of drying time(t), and that of expansion in width direction was $y=-0.692+0.043t-0.001t^2$. 5. Thickness shrinkage was increased more than proportional at to pressure increase. Width shrinkage and thickness recovery was greatest at 35psi. 6. Green volume specific gravity of press dried material was 25% greater than that of air dried material. But equilibrium moisture content of press dried material was less 24% than that of air dried material. Antishrinkage efficiency of press dried material were obtained 27.7%.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.209-217
• /
• 2014

As an idea of healing or fatigue recovery, a desire for massage therapy has increased for modern people who complain of pain such as knotted muscles or shoulder discomfort due to fatigue accumulation and stress. To resolve this, although a massage chair has been developed, it does not provide the most efficient massage as it is not suitable for Korean body types. In this paper, this research analyzed massage, assembly, massage intensity, Korean body types and functions of the massage for maximized efficiency to design critical functions. Also, we implemented the action control and algorithm of the massage chair for localization.

• BMB Reports
• /
• v.50 no.12
• /
• pp.621-627
• /
• 2017

We previously reported the involvement of zinc-finger protein 143 (ZNF143) on cancer cell motility in colon cancer cells. Here, ZNF143 was further characterized in breast cancer. Immunohistochemistry was used to determine the expression of ZNF143 in normal tissues and in tissues from metastatic breast cancer at various stages. Notably, ZNF143 was selectively expressed in duct and gland epithelium of normal breast tissues, which decreased when the tissue became malignant. To determine the molecular mechanism how ZNF143 affects breast cancer progression, it was knocked down by infecting benign breast cancer cells with short-hairpin (sh) RNA-lentiviral particles against ZNF143 (MCF7 sh-ZNF143). MCF7 sh-ZNF143 cells showed different cell-cell contacts and actin filament (F-actin) structures when compared with MCF7 sh-Control cells. In migration and invasion assays, ZNF143 knockdown induced increased cellular motility in breast carcinoma cells. This was reduced by the recovery of ZNF143 expression. Taken together, these results suggest that ZNF143 expression contributes to breast cancer progression.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2005.07a
• /
• pp.52-52
• /
• 2005

Oogenesis, the gonadosomatic index (GSI), reproductive cycle and first sexual maturation of the female Neptunea (Barbitonia) arthritica cumingii have been investigated by light and electron microscope observations. In the early vitellogenic oocyte, the Golgi complex and mitochondria were involved in the formation of glycogen, lipid droplets and yolk granules. In late vitellogenic oocytes, the rough endoplasmic reticulum and multivesicular bodies were involved in the formation of proteid yolk granules in the cytoplasm. In particular, compared with the results of other gastropods, it is a different result that appearances of cortical granules at the cortical layer and microvilli on the vitelline envelope, which is associated with heterosynthetic vitellogenesis, were not observed in vitellogenic oocytes during oogenesis. A mature yolk granule was composed of three components: main body (central core), superficial layer, and the limiting menbrane, Monthly changes in the gonadosomatic index in females were studied in 2002 and 2003 were closely associated with ovarian developmental phases. Spawning occurred between May and August in 2002 and 2003 and the main spawning occurred between June and July when the seawater temperature rose to approximately 18${\sim}$23${\circ}$C. The female reproductive cycle can be classified into five successive stages: early activestage (Septmber to October), late active stage ( November to February), ripe stage (February to June), partially spawned stage (May to Aygust), and recovery stage (June to August).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.136-140
• /
• 2011

The fault current limiting characteristics of the flux-lock type superconducting fault current limiter (SFCL) using a transformer winding were investigated. The suggested flux-lock type SFCL consists of two parallel connected coils on an iron core and the transformer winding connected in series with one of two coils. In this SFCL, the high-TC superconducting (HTSC) element was connected with the secondary side of the transformer. The short-circuit experimental devices to analyze the fault current limiting characteristics of the flux-lock type SFCL using the transformer winding were constructed. Through the short-circuit tests, the flux-lock type SFCL using transformer winding was shown to perform more effective fault current limiting operation compared to the previous flux-lock type SFCL without the transformer winding from the viewpoint of the quench occurrence and the recovery time of the HTSC element.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.141-146
• /
• 2011

When the current of the superconducting element exceeds its critical current by the fault occurrence, the quench of the high-$T_C$ superconducting fault current limiter (HTSC) comprising the flux-lock type superconducting fault current limiter (SFCL) occurs. Simultaneously, the magnetic flux in the iron core induces the voltage in each coil, which contributes to limit the fault current. In this paper, the fault current limiting characteristics of the flux-lock type SFCL as well as the load voltage sag suppressing characteristics according to the flux-lock type SFCL's winding direction were investigated. To confirm the fault current limiting and the voltage sag suppressing characteristics of the this SFCL, the short-circuit tests for the simulated power system with the flux-lock type SFCL were carried out. The flux-lock type SFCL designed with the additive polarity winding was shown to perform more effective fault current limiting and load voltage sag suppressing operations through the fast quench occurrence right after the fault occurs and the fast recovery operation after the fault removes than the flux-lock type SFCL designed with the subtractive polarity winding.

• Journal of Energy Engineering
• /
• v.19 no.2
• /
• pp.57-61
• /
• 2010

In order to make higher domestic self-sufficiency ratio of energy resources, these are required to purchase the producing oil & gas fields through the investment of oversea petroleum development, to make M&A, and to enhance recovery in the existing oil & gas fields. For this purpose, it is essential to acquire the core technology regarding the evaluation, design, and management of oil & gas fields. The accumulation of technology of the evaluation, optimal design, proper management of production fields by the help of the continuous R&D program will make great contribution for higher domestic self-sufficiency ratio by the increased number of purchase of foreign producing fields, the increase amount of produced petroleum out of existing fields, and the effective management of the oil and gas fields.

• Journal of Internet Computing and Services
• /
• v.2 no.5
• /
• pp.41-47
• /
• 2001

This paper deals with an EJB-based database agent(component) used to define workflow processes, which is a core function of the e-Chautauqua workflow management system that is an on-going research product. We describe about how to design and implement the EJB-based DB agent that is deployed on EJB server as a component. The agent is located between the build-time clients and the database system, and manages database accesses, such as retrieves and stores, from the workflow definition components. Through the EJB technology, we are able to accomplish a stable database agent that can be characterized by the distributed object management, reliable recovery mechanism from system failovers, reliable large-scale transaction management, and the security functions.

• Korean Journal of Human Ecology
• /
• v.22 no.2
• /
• pp.301-313
• /
• 2013

Though customer delight is becoming one of the most important marketing key words, research in a retail setting is limited. With the dramatic growth of online retail shopping, this study explored customer delight experiences in online shopping malls by identifying the delight elements and analyzing the elements by online purchase steps. A total of 124 delight experiences collected from an unstructured questionnaire were content-analyzed. Delight elements in online shopping were categorized into service, product, price, delivery, package, and shopping mall operation in that order. Service related elements including free gifts and letters, recovery efforts for service failure, kind employees, and easy return were most frequently observed. Delights were experienced at the product receiving point, the prior-to-purchase point, the order-to-delivery point, and the post-purchase point in that order. The results revealed that customer delights in online shopping were experienced in various purchase steps by various marketing elements. Based on the results the study provided research propositions exploring the effects of expectation vs surprise, monetary vs non-monetary/emotional benefits/rewards, and core marketing elements vs augmented services on delight experiences.