• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.293-298
• /
• 2021

In general, the guided weapon seeker and the guided control device process the target, search, recognition, and capture information to indicate the state of the guided missile, and play a role in controlling the operation and control of the guided weapon. The signals required for guided weapons are gaze change rate, visual signal, and end-stage fuselage orientation signal. In order to process the complex and difficult-to-process missile signals of recent missiles in real time, it is necessary to increase the data processing speed of the missiles. This study showed the processing speed after applying the stop and go and inverse enumeration algorithm among the parallel algorithm methods of PINQ and comparing the processing speed of the signal data required for the guided missile in real time using the guided missile inspection program. Based on the derived data processing results, we propose an effective method for processing missile data when applying a parallel processing algorithm by comparing the processing speed of the multi-core processing method and the single-core processing method, and the CPU core utilization rate.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.119-124
• /
• 2009

In this paper, AMR-WB+ audio coder is implemented, in real-time, using Intel 400MHz Xscale PXA250 with 32bit RISC processor ARM9E-J(R)core. The assembly code for ARM9E-J(R)core is developed through the serial process of C code optimization, cross compile, assembly code manual optimization and adjusting the optimized code to Embedded Visual C++ platform. C code is trimmed on Visual C++ platform. Cross compile and assembly code manual optimization are performed on CodeWarrior with ARM compiler. Through these stages the code for both ARM EVM board and PDA is implemented. The average complexities of the code are 160.75MHz on encoder and 33.05MHz on decoder. In case of static link library(SLL), the required memories are 65.21Kbyte, 32.01Kbyte and 279.81Kbyte on encoder, decoder and common sources, respectively. The implemented coder is evaluated using 16 test vectors given by 3GPP to verify the bit-exactness of the coder.

• The Korean Journal of Rehabilitation Nursing
• /
• v.5 no.2
• /
• pp.217-225
• /
• 2002

Purpose : This research is aimed at developing a substantive theory related to the experience of adjustmented hemodialysis patients by identifying and analyzing the nature, process, and types of adjustment experienced by them. For this purpose, this study takes a grounded theory approach. Method : Data were collected from April, 2002 through September, 2002 through in-depth interviews and close observations of eleven hemodialysis patients who have experienced adjustment. With their consent, the interviews were recorded by audio tapes and later transcribed. Observation memos were also prepared on the subjects' behavior during the interviews. Data collection continued until saturated. The data were analyzed into concepts, subcategories, and categories with the open coding process. The axial coding was done to identify the relationships of the concepts and categories. And the selective coding was done to develop a core category, which is the central phenomenon of the hemodialysis patients who experienced adjustment. Result : This process resulted in 88 concepts, which may be grouped into 24 subcategories and 6 core categories. The 6 categories, in fact, depict the process of changes the patients experience from the sense of crisis, self-control, new life meaning, support system, coping ability, and quality of life improvement. And its core is self-control, which encompasses the dynamic stages from recognition, change attempts, belief solidification, and empowerment. Conclusion : The results of the research offer the following implications. First, research on adjustment is a formative stage in nursing, it is imperative for nursing researchers to develop them, which may be more relevant to nursing. Second, it is important to develop nursing intervention techniques that may be most effective in adjustment of hemodialysis patients and at the same time for each stage of changes taking place in adjustmented hemodialysis patients.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.769-776
• /
• 2011

In order to cope with the requirements of smaller patterns, larger surfaces and lower costs in the fields of displays, optics and energy, greater attentions is now being paid to the development of micro-pattern machining technology. Compared with flat molds, roll molds have the advantages of short delivery, ease of manufacturing larger surfaces, and continuous molding. This paper presents the state-of-the-art of the micro pattern machining technology on the roll molds and introduces some research results on the machining process technology. The copper and nickel-phosphorous-alloy plating process, machining process technology for uniform micro patterns. micro cutting simulation and the real time monitoring system for micro machining are summarized. The developed technologies have led the complete localization of the prism sheets and will be applied to the direct forming process with succeeding research & development.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.2
• /
• pp.77-87
• /
• 2006

It is necessary to change the existing design process to cope with a short life-cycle product and various customer's demands. Also a frequent design change may delay the whole design process and it will increase the unit cost of the production. New alternatives or techniques have emerged to solve the existing design problems, such as a knowledge based engineering, an intelligent CAD, a function based design, and so on. In this paper, we propose a hybrid design system with a knowledge based design methodology and a function based design technique. The knowledge based design is good at a frequent design change and the function based design is effective to extract a core design behavior. In an early design process, the system utilizes a core design behavior through the function based design process. On the other hand, the system manages complicated design issues with the knowledge based design technique in the detailed design process. We conclude that the hybrid design system can bring fair effects on implementing an efficient design environment in aspect of time and expense.

• Design & Manufacturing
• /
• v.2 no.1
• /
• pp.39-43
• /
• 2008

There occur not only many problems in the injection process but also low quality productivity due to the injection conditions of various injection factors. Injection molding process factors such as molding temperature, injection pressure, flow rate and flow velocity, must be controlled properly in filling and packing phases in the injection molding process. In this study, effects of these factors on the injection molding were investigated through the flow analysis for the holding pressure affecting cooling time. Results of this study would be helpful to setting of holding pressure for optimization of forming condition in order to reduce cooling time in injection molding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3194-3200
• /
• 2012

The aim of the paper is systematically to organize the historical facts of financial IT development process through various tracking and proved knowledge, it is to propose the direction and the advanced frame of core-banking model in next generation for the year 2020s. To achieve it, this study variously analyzed the meaningful pattern of development process of financial IT by backtracking life-cycle of Core-Banking model and it presented new model of Core-Banking for the past 40 years. In research findings, the life cycle of financial IT system and core-banking model have been analyzed about 10 years and the longest model of life cycle is about 33 years. As a result, It proved to be desirable that the advanced frame of the Core-Banking model adds the functions of business hub and product life cycle management to basic frame of its existing model in the future. In addition, big bang development method of new next generation system must be sublated. Also, They need to be initiated more business-oriented than IT-oriented. Along with this, the financial IT should be developed into the convergence industry, and it needs to extend the systematization of Core-Banking model studies and more professionals. Finally, this study has arranged the financial IT development process in domestic and presents new frame through analyzing intensively the Core-Banking model for the first time Therefore, it can be contributed to serve the guideline regarding the direction in new next generation system.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.95-104
• /
• 2012

The main purpose of this paper is to propose the direction of financial IT development in macro-perspective. And it also shows a theoretical basis on the financial IT system that will be progressed with regard to an empirical model on the basis of the transformation process of the domestic financial IT environment for the future. In the process, this research produces and analyzes the meaningful patterns that have a significant influence on the financial IT development for 40 years, and attempts to backtrack the life-cycle of the core-banking model. This paper can be summarized as follows: Firstly, I analyzed the life-cycle of financial IT system in Korea per 10years. Secondly. The life-cycle of core-banking model is analyzed by 11years on the average and the one of the long term model by 33years. Thirdly, from the earlier days, the models of a long-term survival core-banking have been designed and developed through the objective analysis and bench-marketing. Lastly, the financial IT field should be developed into the integrated industry, and systematization of core-banking model studies and more professionals need to be extended. This research has contributed to provide the new frameworks through the analysis of the core-banking model that has not studied obviously for a long time. The paper involves two related sections, the first section deals with the significance of backtracking in core-banking model and also focuses on the key components from the perspective of financial IT management strategies. Based on the process, the second section figures out the life-cycles of actual core-banking model.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1088-1099
• /
• 2021

Time-frequency analysis technique is an effective analysis tool for non-stationary processes. In the field of reactor neutron noise, the time-frequency analysis method has not been thoroughly researched and widely used. This work has studied the time-frequency analysis of the reactor neutron noise experimental signals under bubble disturbance and control rod vibration. First, an experimental platform was established, and it could be employed to reactor neutron noise experiment and data acquisition. Secondly, two types of reactor neutron noise experiments were performed, and valid experimental data was obtained. Finally, time-frequency analysis was conducted on the experimental data, and effective analysis results were obtained in the low-frequency part. Through this work, it can be concluded that the time-frequency analysis technique can effectively investigate the core dynamics behavior and deepen the identification of the unstable core process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.977-985
• /
• 2021

The LiDAR sensor is attracting attention as a key sensor for autonomous driving vehicle. LiDAR sensor provides measured three-dimensional lengths within range using LASER. However, as much data is provided to the external system, it is difficult to process such data in an external system or processor of the vehicle. To resolve these issues, we develop integrated processing system for LiDAR sensor. The system is configured that client receives data from LiDAR sensor and processes data, server gathers data from clients and transmits integrated data in real-time. The test was carried out to ensure real-time processing of the system by changing the data acquisition, processing method and process driving method of process. As a result of the experiment, when receiving data from four LiDAR sensors, client and server process was operated using background or multi-core processing, the system response time of each client was about 13.2 ms and the server was about 12.6 ms.