• 제목/요약/키워드: Coordinate System

검색결과 2,222건 처리시간 0.03초

실용측지점의 활용을 위한 GPS측량 (GPS Surveying for Application of Geodetic Point)

  • 오창수
    • 한국측량학회지
    • /
    • 제20권1호
    • /
    • pp.33-38
    • /
    • 2002
  • 본 연구는 GPS측량에 의한 실용측지점 활용의 타당성에 관한 논문으로 위성측량의 효율적인 자료처리를 위해 WGS-84 data를 우리나라 경위도 좌표계로 변환시킨 자료와 현재 사용하고 있는 광주광역시 일원의 기존 삼각점 및 도근점 10개를 선택하여 GPS성과와 기존성과를 비교 분석하여 신뢰성을 검증하고자 하였다. GPS위성을 통하여 기존 삼각점 및 도근점을 측량한 결과 종래 측량방법보다 신속하고, 오차의 균일성도 확보할 수 있으며, 좌표변환이 전산처리 됨으로 장래의 측지 및 지적측량에 효과적인 방법임을 알 수 있었다. 그리고 GPS측량의 성과와 기존 측지측량 및 지적측량성과를 일치시키기 위해서는 우리나라 전역에 대한 측량 당시의 좌표결정방법을 집중적으로 연구하여 GPS 관측 시 각 권역별 성과와 일치된 좌표변환계수를 계산하여 장래 GPS측량에 효과적으로 실용화 시켜야 함을 알 수 있었다.

지적 원점계열 인접 지역에서 지적좌표의 세계좌표 변환 정확도 분석 (Accuracy Analysis for Conversion of the Cadastral Coordinate System into the Global Coordinate System in Areas between Cadastral Datum)

  • 홍성언
    • 한국산학기술학회논문지
    • /
    • 제11권11호
    • /
    • pp.4228-4233
    • /
    • 2010
  • 본 연구에서는 통일원점 지역 중 중부원점과 동부원점이 접하는 지역에서의 지적기준점의 위치정확도를 분석하여 봄으로써 향후 세계좌표변환시 지적 원점계열 상이 지역에서의 세계좌표계 변환의 가능성을 제시하여 보고자 하였다. 연구결과, 실험지역의 지적삼각점 총 12점의 GPS 관측 데이터를 추출하여 중부원점과 동부원점이 접하는 지역에서의 좌표변환의 정확도를 분석한 결과 X좌표의 RMSE는 ${\pm}0.0014m$, Y좌표의 RMSE는 ${\pm}0.0011m$로 매우 양호한 성과가 산출되어 세계좌표로의 변환이 가능한 것으로 분석되었다. 따라서 세계좌표로 변환에 있어 다양한 주변 삼각점에 대한 성과의 점검을 통하여 우선적으로 성과가 안정적인 점을 먼저 선별한 후 이점 들을 최대한 활용하여 세계좌표로의 변환을 시행한다면 원점 접경 지역에서도 좌표변환이 가능할 것으로 판단된다.

진동측정 좌표축 회전을 이용한 저널베어링 상태 진단 (Diagnostics of Journal Bearing System Using Coordinate Transformed Vibration Signals)

  • 윤병동;전병철;정준하;김동환;손석만
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.97-98
    • /
    • 2014
  • Vibration signal has been widely utilized in the diagnostics of rotating mechanical system. Diagnostics systems in rotating machinery are depends on the vibration data which are acquired from the system. However, the characteristics of acquired data can be vary according to the position of anomaly installed or the position of data acquired. In this research, the coordinate transform of journal bearing vibration signal was proposed to overcome the limitation mentioned above. Journal bearing systems are equipped two gap sensors with ninety degree angles, and it can enable to generate coordinate transformed signals in arbitrary angle domain. More abundant information for each normal or anomaly conditions are obtained from coordinate transformation than only the data of the existing measuring position, then we have developed a reliable and robust diagnosis algorithm for journal bearing system.

  • PDF

CCTV 시스템을 위한 움직임 추적 기법 (Motion Tracking Algorithm for A CCTV System)

  • 강승일;홍성훈
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.295-296
    • /
    • 2006
  • This paper implements a method that tracking the moving objects that detected by the motion detection function of the digital CCTV system. We simply implement the motion detection function of the digital CCTV system that use frame difference and thresholding. When motion is detected, the motion detection function generates two outputs. One output is the event that the motion is arised in input image frame. The other output is coordinate that motion is exists. Then, do the block matching algorithm[2] using coordinate, that motion is exists, as initial coordinate of the block matching algorithm. The best matched coordinate is new initial coordinate of the block matching algorithm for the next image frame. We simply use the block matching algorithm that implements tracking the moving objects. It is simple, but useful the actual digital CCTV system.

  • PDF

기준 좌표계에 따른 탄성체의 일반화 파랑 하중 및 응답에 대한 연구 (Investigation on the Generalized Hydrodynamic Force and Response of a Flexible Body at Different Reference Coordinate System)

  • 허경욱;최윤락
    • 대한조선학회논문집
    • /
    • 제58권6호
    • /
    • pp.348-357
    • /
    • 2021
  • In this paper, the generalized hydrodynamic force and response of a flexible body are calculated at different reference coordinate systems. We generalize the equation of motion for a flexible body by using the conservation of momentum (Mei et al., 2005). To obtain the equations in the generalized mode, two different reference coordinates are adopted. The first is the body-fixed coordinate system by a rigid body motion. The other is the inertial coordinate system which has been adopted for the analysis. Using the perturbation scheme in the weakly-nonlinear assumption, the equations of motion are expanded up to second-order quantities and several second-order forces are obtained. Numerical tests are conducted for the flexible barge model in head waves and the vertical bending is only considered in the hydroelastic responses. The results show that the linear response does not have the difference between the two formulations. On the other hand, second-order quantities have different values for which the rigid body motion is relatively large. However, the total summation of second-order quantities has not shown a large difference at each reference coordinate system.

차량 충돌 방지 시스템을 위한 선형 순환 표적 추정기 설계 (Design of Linear Recursive Target State Estimator for Collision Avoidance System)

  • 한슬기;나원상;황익호;박진배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1740-1741
    • /
    • 2011
  • This paper proposes a new linear recursive target state estimator for automotive collision warning system. The target motion is modeled in Cartesian coordinate system while the radar measurements such as range, line-of-sight angle and range rate are obtained in polar coordinate system. To solve the problem by nonlinear relation between these two coordinate system, a practical linear filter design scheme employing the predicted line-of-sight Cartesian coordinate system (PLCCS) is proposed. Especially, PLCCS can effectively incorporate range rate measurements into target tracking system. It is known that the utilization of range rate measurements enables the improvement of target tracking performance. Moreover, PLCCS based target tracking system is implemented by linear recursive filter structure and hence is more suitable scheme for the development of reliable collision warning system. The performance of the proposed method is demonstrated by computer simulations.

  • PDF

통계적 그래픽스 도구로서의 정다각기둥평행좌표그림 (Regular Polyprism Parallel Coordinate Plot as a Statistical Graphics Tool)

  • 장대흥
    • 응용통계연구
    • /
    • 제21권4호
    • /
    • pp.695-704
    • /
    • 2008
  • 평행좌표그림은 다변량자료를 시각화하는 하나의 방법이다. 평행좌표그림은 4차원 이상의 직각좌표계 표시의 어려움을 극복할 수 있는 그림이다. 그러나 변수 축의 배열에 따라 같은 자료에 대하여도 다른 해석이 가능하다. 변수 선택 문제를 해결하는 한 가지 방법으로서 우리는 정다각기둥평행좌표그림을 제안할 수 있다.

Review and Evaluation of Hand-Arm Coordinate Systems for Measuring Vibration Exposure, Biodynamic Responses, and Hand Forces

  • Dong, Ren G.;Sinsel, Erik W.;Welcome, Daniel E.;Warren, Christopher;Xu, Xueyan S.;McDowell, Thomas W.;Wu, John Z.
    • Safety and Health at Work
    • /
    • 제6권3호
    • /
    • pp.159-173
    • /
    • 2015
  • The hand coordinate systems for measuring vibration exposures and biodynamic responses have been standardized, but they are not actually used in many studies. This contradicts the purpose of the standardization. The objectives of this study were to identify the major sources of this problem, and to help define or identify better coordinate systems for the standardization. This study systematically reviewed the principles and definition methods, and evaluated typical hand coordinate systems. This study confirms that, as accelerometers remain the major technology for vibration measurement, it is reasonable to standardize two types of coordinate systems: a tool-based basicentric (BC) system and an anatomically based biodynamic (BD) system. However, these coordinate systems are not well defined in the current standard. Definition of the standard BC system is confusing, and it can be interpreted differently; as a result, it has been inconsistently applied in various standards and studies. The standard hand BD system is defined using the orientation of the third metacarpal bone. It is neither convenient nor defined based on important biological or biodynamic features. This explains why it is rarely used in practice. To resolve these inconsistencies and deficiencies, we proposed a revised method for defining the realistic handle BC system and an alternative method for defining the hand BD system. A fingertip-based BD system for measuring the principal grip force is also proposed based on an important feature of the grip force confirmed in this study.

Robust Pelvic Coordinate System Determination for Pose Changes in Multidetector-row Computed Tomography Images

  • Kobashi, Syoji;Fujimoto, Satoshi;Nishiyama, Takayuki;Kanzaki, Noriyuki;Fujishiro, Takaaki;Shibanuma, Nao;Kuramoto, Kei;Kurosaka, Masahiro;Hata, Yutaka
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제10권1호
    • /
    • pp.65-72
    • /
    • 2010
  • For developing navigation system of total hip arthroplasty (THA) and evaluating hip joint kinematics, 3-D pose position of the femur and acetabulum in the pelvic coordinate system has been quantified. The pelvic coordinate system is determined by manually indicating pelvic landmarks in multidetector-row computed tomography (MDCT) images. It includes intra- and inter-observer variability, and may result in a variability of THA operation or diagnosis. To reduce the variability of pelvic coordinate system determination, this paper proposes an automated method in MDCT images. The proposed method determines pelvic coordinate system automatically by detecting pelvic landmarks on anterior pelvic plane (APP) from MDCT images. The method calibrates pelvic pose by using silhouette images to suppress the affect of pelvic pose change. As a result of comparing with manual determination, the proposed method determined the coordinate system with a mean displacement of $2.6\;{\pm}\;1.6$ mm and a mean angle error of $0.78\;{\pm}\;0.34$ deg on 5 THA subjects. For changes of pelvic pose position within 10 deg, standard deviation of displacement was 3.7 mm, and of pose was 1.28 deg. We confirmed the proposed method was robust for pelvic pose changes.

한국측지좌표계의 재정립에 대한 연구 (Redefinition Procedures of the Korean Geodetic System)

  • 이영진;조규전;김원익
    • 한국측량학회지
    • /
    • 제14권2호
    • /
    • pp.141-150
    • /
    • 1996
  • 최근 우리나라에서는 위성측위시스템의 보급에 따라 측지분야에서 뿐만 아니라 지적 및 GIS/LIS 데이터베이스 관리분야에서도 그 활용성이 커지고 있으며, 지구중심좌표계(geocentric coordinate system)에 대한 관심도 높아지고 있다. 이 논문에서는 현행의 측지기준계를 분석하여 지구중심좌표계에 의한 새로운 측지기준좌표계(geodetic reference frame)의 설정방안을 고찰하였고, 이에 따른 국가기준점망의 구축방법과 기존의 좌표체계에서 새로운 좌표체계로 변경하고자할 경우에 고려되어야 할 기준점관리와 성과관리 등에 대하여 고찰하였다.

  • PDF