Otter boards in the trawl are the one of essential equipments for the net mouth to be spread to the horizontal direction. Its performance should be considered in the light of the spreading force to the drag and the stability of towing in the water. Up to the present, studies of the otter boards have focused mainly on the drag and lift force, but not on the stability of otter boards movement in 3 dimensional space. In this study, the otter board is regarded as a rigid body, which has six degrees of freedom motion in three dimensional coordinate system. The forces acting on the otter boards are the underwater weight, the resistance of drag and spread forces and the tension on the warps and otter pendants. The equations of forces were derived and substituted into the governing equations of 6 degrees of freedom motion, then the second order of differential equations to the otter boards were established. For the stable numerical integration of this system, Backward Euler one of implicit methods was used. From the results of the numerical calculation, graphic simulation was carried out. The simulations were conducted for 3 types of otter boards having same area with different aspect ratio(${\lambda}=0.5,\;1.0,\;1.5$). The tested gear was mid-water trawl and the towing speed was 4k't. The length of warp was 350m and all conditions were same to each otter board. The results of this study are like this; First, the otter boards of ${\lambda}=1.0$ showed the longest spread distance, and the ${\lambda}=0.5$ showed the shorted spread distance. Second, the otter boards of ${\lambda}=1.0$ and 1.5 showed the upright at the towing speed of 4k't, but the one of ${\lambda}=0.5$ heeled outside. Third, the yawing angles of three otter boards were similar after 100 seconds with the small oscillation. Fourth, it was revealed that the net height and width are affected by the characteristics of otter boards such as the lift coefficient.
본 연구에서는 COMS (Communication, Oceanography and Meteorology Satellite) 위성의 GOCI(Geostationary Ocean Color Imager) 센서와 Himawari-8 위성의 AHI (Advanced Himawari Imager) 센서에서 산출되는 에어로졸 광학두께 (Aerosol Optical Depth; AOD)를 활용하여 단일화된 AOD 합성장을 생산하였다. 위성 간의 공간해상도와 위치좌표계가 다르기 때문에 이를 맞춰주는 전처리 작업을 선행하였다. 이후 지상관측 기반인 AERONET (AErosol RObotic NETwork)의 레벨 1.5 AOD 자료를 사용하여 각 위성과 AERONET과의 상관관계 분석 및 추세를 보간하여 기존 위성 AOD 보다 정확한 위성 AOD 자료를 생산하였다. 이후 합성과정을 진행하며 최종적으로 시공간적으로 더 완벽하고 정확한 AOD 합성장을 생산하였다. 생산된 AOD 합성장의 제곱근 평균 오차(Root Mean Square Error; RMSE)는 0.13, 평균 편향(mean bias)는 0.05로, 기존의 GOCI AOD (RMSE: 0.15, Mean bias: 0.11)와 AHI AOD (RMSE: 0.15, Mean bias: 0.05) 보다 나은 성능을 보였다. 또한 합성된 AOD는 단일위성에서 구름으로 인하여 관측되지 못한 지역에서 시공간적으로 보다 완벽하게 생산되었음을 확인하였다.
도로, 철도 등의 토목시설공사는 제한된 구역에서 공정이 반복적으로 진행되는 건축공사와 달리 수십 km의 수평적 작업공간에서 선형 형태로 공정이 진행되고, 개별 공정은 시점부터 종점까지 거리 단위를 갖는 측점(Station)번호로 관리되고 있다. 이러한 이유로 공정의 작업 위치정보가 주요 관리요소가 되고 있으므로, 일정 정보만을 표현하는 간트공정표기반의 공정관리 체계는 한계점을 가질 수 있다. 본 연구에서는 공정의 시작 및 종료일을 나타내는 일정정보와 시작 및 종료 거리를 나타내는 위치정보를 동시에 표현할 수 있는 선형공정표의 구성 방법론을 제시하고, 이에 근거한 선형공정표 생성 시스템을 개발한다. 연구에서 선형공정표의 좌표축은 X, Y축을 각각 거리와 일정 값으로 구성하였으며, 개별 공정은 작업 내용을 유추할 수 있는 심볼로 표현하여 단순 막대도표 방식 대비 공정표의 시인성을 높였다. 개발된 선형공정표 생성 시스템은 철도시설 교량공사의 실제 공정 데이터를 활용하여 실무적 활용성을 검토하였다.
사면붕괴의 위험성이 있는 다양한 실계측 데이터들이 토목기술자들에게 주어졌지만 이를 해석, 가공 후 실시간 사면거동양상을 분석하고 사면안정에 대한 결론을 유도하는 일은 결코 쉬운 일이 아니다. 최근 많은 연구기관들이 실시간 계측시스템을 위험 사면 현장에 설치하고 이를 계측하고 있으나, 대부분이 하드웨어 시스템의 설치에 초점을 맞추고 있어 이들 계측시스템에서 구한 실시간 계측자료를 해석하는 소프트웨어는 상대적으로 약하다고 할 수 있다. 그러므로 이 연구는 시간에 따라 변위가 지속적으로 증가하는 사면거동에 대한 계측자료들이 서로 어떤 상호관련성이 있고 군집화되는지를 보여주고자 하는 데 목적이 있다. 실시간 계측자료들을 분류함에 있어 저자들은 세 가지의 수학적 개념을 사용하고자 한다. 즉 평균변위차지수($AD_{i,j}$), 평균상대변위차($\overline{RD}_{i,j}$) 및 평균상대좌표시스템($\overline{RD}$, AD)을 사용하고자 한다. 이 세 가지 개념은 통계학적 방법 및 사면파괴거동에 토대를 두고 있다. 그러므로 이 방법들은 파괴거동을 일으키는 같은 대상 사면영역의 군집특성을 보여준다.
The objective of this paper is to think about what structural reforms of the Korean government S&T development management system might be. Korean society is currently experiencing a drastic socio-economic transformation. The results of this transformation should be reflected on the determining process of the directions and breadths of structural reforms of government S&T development management system. Because the government system design will be based on the premises of socio-economic conditions under which administrative activities perform and also this socio-economic changes can influence on changes of the premises of government management system design. Moreover, S&T development management system is a subsystem of government system so that the directions of structural reform of those subsystems should be considered in the broad framework changes in the development management system of the government. For the last forty years, the Korean government S&T development management system has been based on the premises including transformation from an agrarian society to an industrial society, authoritarianism and centrally controlled institutions, and exteremely small portions of private investments for science and thechonology R & D of the total. Recently, however, the premises of Korean government S&T development management system have rapidly changed. the characteristics of these changes are including tranformation from an industrial society to a knowledge and information intensive society, globalization, localization, and relatively large portion of private investments for science and technology R & C of the total. The basis of government reforms in Korea was the realization of the performances and values through the enhancement of national competitive capacity, attainment of lean government, decentralization and autonomy. However, the Korean government has attached a symbolic value of strategic organizations representing strong policy intentions of government for the science and technology based development. Most problems associated with the Korean government S&T development management system have grown worse during 1990s. Many people perceive that considerable part of this problem was generated because the government could not properly adapt itself to new administrative environment and the paradigm shift in its role. First of all, the Korean government S&T development management system as a whole failed to develop an integrated vision under which processes in formulating science and thechology development goals and developing consistent government plans concerning science and technology development are guided. Second, most of the local governments have little organizational capacity and manpowers to handle localized activities to promote science and technology in their regions. Third, the measure to coordinate and set priorities to invest resources for the development of science and technology was not effective. Fourth, the Most has been losing its reputation as the symbol of ideological commitment of the top policy maker to promote science and technology. Various ideas to reform government S&T development management system have been suggested recently. Most frequently cited ideas are as follow : (ⅰ)strengthen the functions of MoST by supplementing the strong incentive and regulatory measures; (ⅱ)create a new Ministry of Education, Science & Technology and Research by merging the Ministry of Education and the MoST; (ⅲ)create a new Ministry of Science & Technology and Industry ; and(ⅳ)create a National Science and Technology Policy Council under the chairmanship of the President. Four alternatives suggested have been widely discussed among the interested parties and they each have merits as well as weaknesses. The first alternative could be seen as an alternative which cannot resolve current conflicts among various ministries concerning priority setting and resource allocation. However, this alternatives can be seen as a way of showing the top policymaker's strong intention to emphasize science and technology based development. Second alternative is giving a strategic to emphasize on the training and supplying qualified manpower to meet knowledge and information intensive future society. This alternative is considered to be consistent with the new administrative paradigm emphasizing lean government and decentralization. However, opponents are worrying about the linkages and cooperative research between university and industry could be weakening. The third alternative has been adopted mostly in nations which have strong basic science research but weak industrial innovation traditions. Main weakness of this alternative for Korea is that Korean science and technology development system has no strong basic science and technology research traditions. The fourth alternative is consistent with new administrative paradigms and government reform bases. However, opponents to this alternative are worried that the intensive development of science and technology because of Korea's low potential research capabilities in science and technology development. Considerning the present Korean socio-economic situation which demands highly qualified human resources and development strategies which emphasizes the accumulations of knowledge-based stocks, I would like to suggest the route of creating a new Ministry of Education, Science & Technology and Research by intergrating education administration functions and science & technology development function into one ministry.
목 적: 두경부 암 환자 치료 시 표적 및 주변 장기(Target 및 Structure)를 확인하는 방법으로 MVCBCT, KVCBCT, CT On-rail System, Ultrasound 등이 이용된다. 이 중 MVCBCT의 경우는 뼈를 이용한 표적 및 주변 장기의 확인에는 유용하나, 연부조직으로 구성된 표적 및 주변 장기의 확인에는 어려움이 있다. 이에 본 연구에서는 CT On-rail System을 이용하여 두경부 암 환자의 이하선의 움직임에 대한 파악과 체적의 변화에 따른 선량의 변화를 연구해 보고자 한다. 대상 및 방법: 본원에서 두경부 암으로 치료받는 환자 5명을 대상으로 하였다. 선택된 환자는 시멘스사 ARTISTE CT Vision (CT On-rail System)을 이용하여 주당 3회씩 CT 스캔을 시행하였다. CT 스캔 후 이하선의 움직임을 치료 계획시의 영상과 비교하여 이동된 좌표를 얻었으며, 이하선의 체적을 확인하기 위하여 획득한 CT영상을 치료계획 시스템(RTP System)에 전송하여 변화된 체적에 따른 선량분포의 차이를 확인하였다. 결 과: 이하선의 움직임에 의한 표적 좌표의 변화는 X: -0.4~0.4 cm, Y: -0.4~0.3 cm, Z: -0.3~0.3 cm이었다. GTV의 체적은 평균 7.11%/week로 감소되었으며 이하선의 체적과 선량의 변화는 평균적으로 좌측 이하선의 체적은 평균 4.81%/week, 우측 이하선의 체적은 2.91%/week, 선량은 좌측 이하선의 선량은 3.66%/week, 우측 이하선 선량은 2.01%/week 감소하였다. 결 론: CT On-rail System에서 얻어진 영상을 이용하여 표적 및 주변 장기를 확인한 결과 MVCBCT를 이용한 영상에 비해 연부조직의 관찰에 우수함을 알 수 있었다. 또한, 획득한 영상으로 재 치료계획(Replanning)을 한 후 선량의 재분포를 획득한 결과 단순한 움직임의 보정뿐 아니라 체적의 변화를 고려한 정확한 선량분포를 얻을 수 있었으며, 이렇게 보정된 선량의 전달은 Adaptive Targeting Radiotherapy가 가능할 수 있다고 사료된다. 향후 선량의 전달까지 걸리는 시간을 단축할 수 있는 Real Time Adaptive Targeting Radiotherapy가 구축되어야 할 것으로 사료된다.
국가정책 및 사회적 여건의 변화에 따라 도시부의 교통혼잡 완화를 위한 물리적 도로 확대가 한계에 다다른 지금 혼잡 완화를 위해서는 기존 도로의 효율성을 재고하는 방안이 간구되어야한다. 또한 지능형교통체계(ITS)는 과거 루프 및 영상검지기 등을 통한 도로기반 지점검지 중심의 교통정보 수집체계에서 도로, 자동차 및 보행자간의 다양한 수집 체계를 통한 실시간 구간검지 체계 중심의 차세대 지능형교통체계(C-ITS :Co-operative ITS)로 빠르게 진화하고 있으나 현재 교차로의 운영 및 제어를 위한 교통정보의 수집방법은 지점검지체계에 국한되어 있는 실정이다. 따라서 본 연구는 현재 Hi-pass에 적용된 DSRC기술을 통해 수집이 가능한 구간정보를 이용하여 접근로의 대기행렬 길이를 산정하고 이를 활용하는 독립교차로의 실시간 신호제어모형의 개발 및 평가를 목적으로 하였다. 대기행렬길이 추정을 위해 구간검지기를 통해 수집된 개별차량의 통행시간을 이용하여 시공도 상에 4개의 좌표값을 추정하였으며 한 주기동안 추정된 좌표값들을 통해 대기행렬이 생성되는 충격파의 속도 및 대기행렬길이를 추정하였다. 실시간 신호제어를 위해 각 방향별 추정된 대기행렬길이를 통해 전체 교차로의 대기행렬길이의 합이 최소가 되는 신호시간을 산정하였으며 API 기능을 제공하는 미시적 시뮬레이션 프로그램인 VISSIM을 활용하여 총 3개의 시나리오를 평가하여 알고리즘에 의해 교차로의 대기행렬 길이의 합이 최소가 되는 신호시간의 산정이 가능함을 확인하였다.
차량의 차종 분류는 요금소에서의 요금 징수, 교통 통계의 수집, 교통 예측 등의 다양한 분야에 쓰이고 있다. 대부분의 차종 분류 기준이 직간접적으로 차량의 전장에 그 기능의 일부를 의존하고 있어 신뢰성이 높은 차량의 전장 자동 측정 시스템의 필요성이 대두되고 있다. 본 연구는 고가의 측정 장비를 대신할 수 있도록 상대적으로 저렴한 레이저 거리계와 이를 회전시켜 측정 대상 차량을 여러 방면으로 측정할 수 있는 회전 구동부를 제작하여 차량의 전장 측정 장치를 구성하였다. 구현된 시스템은 공간상의 한 점과 레이저 거리계 사이의 거리를 구면좌표계 상의 좌표로 나타내며 레이저 거리계의 거리 측정 값과 회전 구동부의 회전량을 이용하여, 구면좌표계 상의 좌표를 얻는다. 얻은 좌표를 이용하여 측정하는 물체의 수평 단면 윤곽선을 얻은 후, 수평 방향 회전각에 대한 변화율을 구하고, 그 부호를 저장한 후, 제곱을 취하여 레이더 타겟 검지에 쓰이는 일정오경보율 쓰레시홀딩 기법을 사용하여 배경과 물체 사이의 경계를 구했다. 구한 경계를 이용하여 삼각비 측량 방법을 통해 차량의 전장을 산출하였고 그 결과가 실제 전장과 크게 다르지 않음을 확인하였다.
International Journal of Fuzzy Logic and Intelligent Systems
/
제7권4호
/
pp.228-235
/
2007
The main purpose of this paper is to manage the container property effectively at the container yard by applying the RTLS technology to the field of port logistics. Yet, many kinds of noises happen to be inputted with the distance value(between the reader and the tag) which is to be inputted into the location identification algorithm, which makes the distance value jumped due to the system noise of the ultrasonic sensor module and the measurement noise. The Kalman Filter is widely used to prevent this jump occurrence; the noises are eliminated by using the EKF(Extended Kalman Filter) while considering that the distance information of the ultrasonic sensor is non-linear. Also, the 3D RTLS system at the port container yard suggested in this research is designed not to be interrupted for its ultrasonic transmission by positioning the antenna at the front of each sector of the container where the active tags are installed. We positioned the readers, which function as antennas for location identification, to four places randomly in the absolute coordinate and let the positions of the active tags identified by using the distance data delivered from the active tags. For the location identification algorithm used in this paper, the triangulation measurement that is most used in general is applied and newly reorganized to calculate the position of the container. In the first experiment, we dealt with the error resulting in the angle and the distance of the ultrasonic sensor module, which is the most important in the hardware performance; in the second, we evaluated the performance of the location identification algorithm, which is the most important in the software performance, and tested the noise cancellation effects for the EKF. According to the experiment result, the ultrasonic sensor showed an average of 3 to 5cm error up to $45^{\circ}$ in case of $60^{\circ}$ or more, non-reliable linear distances were obtained. In addition, the evaluation of the algorithm performance showed an average of $4^{\circ}{\sim}5^{\circ}$ error due to the error of the linear distance-this error is negligible for most container location identifications. Lastly, the experiment results of noise cancellation and jump preservation by using the EKF showed that noises were removed in the distance information which was entered from the input of the ultrasonic sensor and as a result, only signal was extracted; thus, jumps were able to be removed and the exact distance information between the ultrasonic sensors could be obtained.
열악한 작업환경 때문에 수중항만공사를 기계화하려는 많은 노력들이 시도되고 있다. 본 논문은 수중항만공사 중 사석 고르기 작업을 수행하는 수중건설로봇에 대해 기술한다. 로봇의 블레이드는 울퉁불퉁한 지형에서도 사석 마운드를 기준면에 대해 평편하게 고르고, 다목적암은 사석을 파고, 채울 수 있게 설계되었다. 본 연구는 로봇에 설치된 위치 및 방위 센서와 동기를 이루면서 주행과 스윙운동이 포함된 다목적암과 블레이드의 기구학을 해석한다. 기준수심센서에 부여된 월드좌표에 대해서 블레이드와 다목적암의 위치와 방위를 나타내고, 기준면과 나란한 고르기 작업을 위한 형상을 찾는다. 고르기 작업을 위한 유압제어시스템을 개발하며, 로봇에 의한 육상 및 수중 사석 고르기 작업을 실시해 실험결과를 보인다. 로봇의 작업속도는 잠수부보다 8배 정도 빠르며 작업품질도 우수한 것으로 평가된다. 잠수부가 작업할 수 없는 대수심에서는 효율성이 더 좋을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.