• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.376-379
• /
• 2001

This paper describes the design and fabrication process of super water-saving toilet bowl system by the theory of inventive problem solving (TRIZ). The physical contradiction in TRIZ is defined to obtain the conceptual design for saving water in toilet bowl system with preventing the bad smell from septic tank. The super water-saving toilet bowl system is obtained by using the separation principle in time for resolving the physical contradiction. The consumption of water in the prototype system fabricated, is estimated about $3{\ell}$ comparing with $13{\ell}$ of that in conventional toilet bowl system. The noise from water in the prototype toilet bowl system is decreased by 1/3 of that in conventional toilet bowl system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.290-294
• /
• 1995

In master-slave teleoperation system, time delay may be a critical problem because a task is performed over a distance. Even if the system is stable without time delay, time delay can make the system unstable. In this paper a new control scheme applicable to the system with time delay would be proposed,which is based on the conventional position-position feedback type controller. The stability of this control system is proved using scattering theory, and is compared with the conventional ones. By performing the simulation of a one-d.o.f master-slave system, the validity of the proposed algorithm is verified.

• Journal of information and communication convergence engineering
• /
• 제16권3호
• /
• pp.160-165
• /
• 2018

This paper designed and developed the image processing system of integrating feature extraction and matching by using convolutional neural network (CNN), rather than relying on the simple method of processing feature extraction and matching separately in the image processing of conventional image recognition system. To implement it, the proposed system enables CNN to operate and analyze the performance of conventional image processing system. This system extracts the features of an image using CNN and then learns them by the neural network. The proposed system showed 84% accuracy of recognition. The proposed system is a model of recognizing learned images by deep learning. Therefore, it can run in batch and work easily under any platform (including embedded platform) that can read all kinds of files anytime. Also, it does not require the implementing of feature extraction algorithm and matching algorithm therefore it can save time and it is efficient. As a result, it can be widely used as an image recognition program.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 추계학술대회
• /
• pp.93-96
• /
• 1992

The object of this research is to develop the autobalancing system based-on microprocessor for hemodiafiltration(HDF). The results obtained from the proposed system are as follows: (1) Conventional HD system is not proper for removal medium molecular articles but HDF is proper when this autobalaning system is interfaced. (2) we can get mere exact information than conventional HD system using electronic balancemeter.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.371-378
• /
• 2011

In this paper, the wavelet denoising techniques using thresholding method are applied to the low cost micro electromechanical system (MEMS)-global positioning system(GPS) integrated system. This was done to improve the navigation performance. The low cost MEMS signals can be distorted with conventional pre-filtering method such as low-pass filtering method. However, wavelet denoising techniques using thresholding method do not distort the rapidly-changing signals. They can reduce the signal noise. This paper verified the improvement of the navigation performance compared to the conventional pre-filtering by simulation and experiment.

• 한국통신학회논문지
• /
• 제12권5호
• /
• pp.535-542
• /
• 1987

본 논문에서는 비동기 반복 FH/MFSK방식의 변형된 시스템을 제안하였다. 반복 FH/MFSK 방식에서 정보비트수를 번지비트수 보다 적게 전송함으로써 시스템의 성능을 향상시킬 수 있었으며 변형된 시스템의 오율을 계산하고, 기존의 시스템과 비교하였다. 그리고 변형된 시스템은 성능이 향상되었으며 또한 수신기의 구조가 기존의 것보다 현저하게 간략하게 됨을 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.45-53
• /
• 2003

본 연구에서는 프래쉬버트 용접에서의 용접성을 향상시키기 위하여 인버터를 대용량 시스템에 적용하여 타당성을 검증하였다. 제안된 시스템은 풀브릿지 인버터방식을 채택하고, DSP제어기를 사용하였다. 인버터시스템으로 동작 주파수를 향상시키면서 기존의 위상 제어형 용접기의 용접성과 비교하여 스패터가 저감되는 등 용접성이 개선되는 것을 여러 가지 금속학적인 방법들을 이용하여 확인하고, 인버터 시스템의 타당성을 검증하였다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.405-411
• /
• 2010

This paper proposes a novel tracking algorithm considering radiation to improve the power of a photovoltaic (PV) tracking system. The sensor method used in a conventional PV plant is unable to track the sun's exact position when the intensity of solar radiation is low. It also has the problem of malfunctions in the tracking system due to rapid changes in the climate. The program method generates power loss due to unnecessary operation of the tracking system because it is not adapted to various weather conditions. This tracking system does not increase the power above that of a power of tracking system fixed at a specific position due to these problems. To reduce the power loss, this paper proposes a novel control algorithm for a tracking system and proves the validity of the proposed control algorithm through a comparison with the conventional PV tracking method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.332-334
• /
• 1994

This paper proposes a robust active noise control (ANC) system. The system constructs filter with a standard model. An adaptive litter, connected to the system in parallel, compensates the modeling error. When the adaptive filter does not work, the proposed system is robust while the conventional system loses the noise control capability. But proposed ANC system shows that the performance is comparable with that of the conventional ANC system under normal conditions.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.105-111
• /
• 2016

In order to inspect the quality of spot welding, inefficient destructive test and NDT (non destructive testing) utilizing expensive foreign ultrasonic inspection are being conducted in the automobile production lines, but NDT will be difficult to be used in the domestic automobile production due to complexity of the waveform analysis and lack of mobility. In this paper, NDT system inspecting the quality of spot welding based on mobile network is proposed to complement drawbacks of the conventional inefficient destructive testing and NDT inspecting the quality of spot welding. Regardless of daily condition of NDT tester, the proposed NDT system can determine the quality of spot welding automatically and transmit the information of NDT quality to smart devices of field workers in real-time so that convenience of NDT and productivity of automobile production will be improved. Several specimens with a variety of welding quality was produced to evaluate the performance of the proposed mobile ultrasonic NDT system and the conventional foreign equipment, through this experiments, the proposed mobile ultrasonic NDT system indicate the superior properties compared to the conventional equipment in terms of convenience, productivity, and economic.