• Explosives and Blasting
• /
• v.21 no.3
• /
• pp.23-35
• /
• 2003

An analytical diffusion model for flood routing with backwater effects and lateral flows is developed. The basic diffusion equation is linearized about an average depth of (H + h), and is solved using the boundary conditons which take into account the effects of backwater and lateral flows. Scouring phenomenon around pier which affects on the support function of pier and the stabilization if river bed is a complex problem depending on flow properties and river bed state as well as pier geometry. therefore, there is no uniting theory at present which would enable the designer to estimate, with confidence, the depth of scour at bridge piers. The various methods used in erosion control are collectively called upstream engineering, HEC-RAS Model, underwater blasting. They consist of reforestation, check-dam construction, planting of burned-over areas, contour plowing and regulation of crop and grazing practices. Also included are measures for proper treatment of high embankments and cuts and stabilization of streambanks by planting or by revetment construction. One phase of reforestation that may be applied near a reservoir is planting of vegetation screens. Such screens, planted on the flats adjacent to the normal stream channel at the head of a reservoir, reduce the velocity of silt-laden storm inflows that inundate these areas. This stilling action causes extensive deposition to occur before the silt reaches the main cavity of the reservoir.

• Archives of Plastic Surgery
• /
• v.33 no.2
• /
• pp.205-212
• /
• 2006

Using adipose derived stem cells(ASCs), neurogenic differentiation was induced in a mono layered culture medium containing neuronal induction agents. Cells differentiated to the neuronal cells were observed with a inverted microscope and immunofluorecent study. We made a 15 mm long defect in the sciatic nerve of 14 rats and connected a silicone tube to the defect. Then, we mixed neuronal progenitor cells differentiated from ASCs with collagen gel and grafted them to a group of rats(experimental group) and grafted only collagen gel into another group(control group). In 4 and 8 weeks after the graft, histological observation was made. According to the result, the number and diameter of myelinated axons were significantly increased in the experimental group. In addition, the nerve conduction velocity was improved more in the experimental group and neovascularity also increased. Moreover, reaction with S100 and p75 was observed in regenerated nerves in the experimental group, suggesting that the grafted cells were differentiated into supportive cells such as Schwann's cells. In conclusion, this research proved that ASCs can multiply and differentiate into neuronal cells. If they are grafted into nerve defects, the grafted cells are differ entiated into supportive cells such as Schwann's cells and thus contribute to nerve regeneration. Accordingly, the use of adipose tissue obtained easily without the limitation of donor site can be greatly helpful in treating peripheral nerve defects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.869-876
• /
• 2011

It is important to analyze the dynamic behavior of counter-rotating rigid/deformable rolls in the roll-coating process, because the stability of the process is affected by the dynamic characteristics. In the present study, the effects of material property, angular velocity, and gap size on the contact pressure and contact shape of the deformable roll are numerically investigated. The behavior of two rolls with a negative gap was analyzed using the finite element method, and the material property of the deformable roll was applied with the Mooney-Rivlin coefficients of the hyper-elastic model. The contact shape is affected by the gap size, and the contact pressure mainly depends on the stiffness of the deformable roll and the gap size. To maintain a negative gap between two rolls, controls such as load and displacement controls must be used. The results indicate that displacement control can reduce the instability.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.153-165
• /
• 2013

The established gait analysis studies have regarded leg as one single spring. If we can design a knee-ankle actuating mechanism as a primary actuator for supporting knee extension, it might be possible to revolutionary store or release elastic strain energy, which is consumed during the gait cycle, and as a result leg stiffness is expected to increase. An ankle joint actuating mechanism that stores and releases the energy in ankle joint is expected to support and solve excessive artificial leg stiffness caused by the knee actuator (primary actuator) to a reasonable extent. If unnecessary kinematic energy is released with the artificial speed reduction control designed to prevent increase in gait speed caused by increase in time passed, it naturally brings question to the effectiveness of the actuator. As opposed to the already established studies, the authors are currently developing knee-ankle two actuator system under the concept of increasing lower limb stiffness by controlling the speed of gait in relative angular velocity of the two segments. Therefore, the author is convinced that compensatory mechanism caused by knee actuating must exist only in ankle joint. Ankle joint compensatory mechanism can be solved by reverse-examining the change in metatarso-phalangeal joint (MTPJ) tilt angle (${\theta}_1=0^{\circ}$, ${\theta}_2=17^{\circ}$, ${\theta}_3=30^{\circ}$) and the effect of change in gait speed on knee activity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.127-136
• /
• 2020

Purpose: This study aimed to establish a basis for application time and cold therapy interval by checking the physiological changes after applying a cold-gel and ice pack, commonly applied to cold therapy, and after passive rewarming. Method: A total of 22 healthy adults used cold-gel packs and ice packs in a Randomized control group repeated measurement study, and passive rewarming was performed for 40 minutes after 30 minutes of cold therapy. After applying to the right axilla, StO₂, SpO₂, peripheral blood flow, skin and body temperature were measured 15 times every 5 minutes. Result: In the cold-gel pack group, StO₂ decreased from 69.43% to 61.06% after 30 minutes application, and in the ice pack group, StO₂ decreased from 67.66% to 64.80% (p <001). In the cold-gel pack group, skin temperature decreased from 33.57℃ to 29.15℃ after 30 minutes application, and in the ice pack group, skin temperature decreased from 32.64℃ to 28.90℃ (p <.001). Only skin temperature recovered completely after 40 minutes of rewarming. There were insignificant differences between the cold-gel pack and ice pack. Conclusion: When applying cold therapy to the axillary, at least 40 minutes for passive rewarming is necessary after 30 minutes of application.

• Journal of Korea Water Resources Association
• /
• v.40 no.12
• /
• pp.1007-1014
• /
• 2007

Recently, existing river improvement methods for flood control purpose have changed into nature friendly river improvement methods and the efforts to improve the river environment including river restoration have been made, and close-to-nature river improvement and nature friendly river restoration are actively conducted all over the country. In the present situation where various revetment methods are used after the introduction of the concept of close-to-nature river improvement, the environmental characteristics of rivers need to be considered to apply more suitable revetment methods. Therefore, as a precedent study for the development of revetment evaluation techniques and methods for close-to-nature river improvement, the present study suggested evaluation techniques using detailed survey items through field survey. Evaluation items of hydraulic stability consist of mode of streamline, stream bed gradient, flow velocity and tractive force ratio and those of environmental efficiency consist of revetment of vegetation, state of river water, land use of the terrace land on the river, vegetation and materials of the terrace land on the river. Each item was graded with the point 1 through 5. Hydraulic stability and environmental efficiency was evaluated by the points which were averaged in each items. As the result of the application of the proposed evaluation technique, it was found that a number of existing revetments excessively focus on hydraulic stability with little consideration about environmental term. It is expected that the proposed technique in the present study can be used as a base for providing guidelines to construct the design and construction of revetments in the future.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.404-411
• /
• 2009

We introduce in this paper a new method for smooth foldover-free warping of images, based on the vector field deformation technique proposed by Von Funck et al. It allows users to specify the constraints in two different ways: positional constraints to constrain the position of a point in the image and gradient constraints to constrain the orientation and scaling of some parts of the image. From the user-specified constraints, it computes in the image domain a C1-continuous velocity vector field, along which each pixel progressively moves from its original position to the target. The target positions of the pixels are obtained by solving a set of partial derivative equations with the 4th order Runge-Kutta method. We show how our method can be useful for texture mapping with hard constraints. We start with an unconstrained planar embedding of a target mesh using a previously known method (Least Squares Conformal Map). Then, in order to obtain a texture map that satisfies the given constraints, we use the proposed warping method to align the features of the texture image with those on the unconstrained embedding. Compared to previous work, our method generates a smoother texture mapping, offers higher level of control for defining the constraints, and is simpler to implement.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.381-393
• /
• 2011

This study focus on the surface deterioration diagnosis based on the material characteristics of Taean Dongmunri Maaesamjonbulipsang(rock-carved standing triad Buddha Statue) and the weathering environment analysis. Rock materials of the triad Buddha is coarse-grained biotite granite which is composed mainly of quartz, K-feldspar, plagioclase, biotite and muscovite. The triad Buddha was serious surface irregularity(13.5%), exfoliation(12.3%) and discoloration(46.6%), and the physical characteristics using ultrasonic velocity appeared fourth grade (0.59, highly weathered). Korean style wooden shelter of the triad Buddha(closed type) maintained high humidity environment (daily mean; 86.6%) than exterior environment, and appeared the possibility of deterioration by freezing-thawing because the temperature showed below zero temperatures in winter. The shelter was changed from closed-type to open-type to relieve the moisture problem recently. But the moisture problem is yet to be solved because surface water flowing along northern wayside is flowed into triad Buddha. Therefore, environmental control will need to stop inflow of water into triad Buddha.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.3
• /
• pp.194-204
• /
• 2007

A numerical analysis and hydraulic experiments were undertaken to investigate the head loss occurring when a flow passes through vertical perforated walls. The numerical analysis applied continuity, momentum and energy equations to the control volumes that were set near the perforated wall. Non-dimensional equations were then derived to calculate both upstream depth and head loss for the given values of downstream depth and velocity. The hydraulic experiments were performed with several single and triple perforated plates varying their opening ratios and intervals. The numerical results with the single plates were compared with the experimental results, and it was shown that the contraction coefficient of the vertical line jet formed after the perforated plates relies on downstream Froude number as well as opening ratio. Based on the experimental results, empirical formulas were formulated. Finally, the formulas were applied to the triple plates sequentially from downstream side to upstream side, and it was found that in general the predicted values nicely agreed with the experimental results.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.1
• /
• pp.53-61
• /
• 1996

Geothermal water contains toxic quantities of sulfur, potassium, sodium, boron, and other toxic elements. These toxic elements can substantially restrict germination and seedling growth in rice plant. Germination percentage, average days required for germination and germination velocity were drastically affected by geothermal water. Binato cultivar has higher germination rate compared to IR58 and Unbong 7. Plant height, root length, leaf number and total dry weight decreased with increased geothermal water concentration. Binato and IR58 showed higher total dry weight than Unbong 7 at 25 percent geothermal water at 15 days after treatment (DAT). Binato and IR58 were relatively more tolerant than Unbong 7 in terms of percentage of leaf damage at 25, 50 and 75％ concentration of geothermal water at 10 DAT. The development of large and small vascular bundles decreased with increasing concentration of geothermal water from control to 50％ in three rice cultivars.