• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.37-38
• /
• 2006

In this paper, power distribution module for car relay control with Control area network is developed. This module is called Intelligent power distribution module because it has microprossor which can communicate with other electric module such as ECU and Body control module and also has self-diagonasis function. The developed IPDM module is tested on vehicle and the good performance has been achieved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.897-900
• /
• 2005

This paper presents temperature control of aluminum plate using Peltier module. As one of the thermoelectric effect, Peltier effect is heat pumping phenomena by electric energy. So if current is charged to Peltier module, it absorbs heat from low temperature side and emits heat to high temperature side. In this experiment, Peltier module is used to control the temperature of small aluminum plate with heating and cooling ability of Peltier module with current control and fan On/OFF control. And current control of Peltier module was accomplished by PWM method. As a results of experiments, it takes about 125sec to control temperature of aluminium plate between $30^{\circ}C\;and\;70^{\circ}C$ and about 70sec between $40^{\circ}C\;and\;60^{\circ}C$, in ambient temperature $29^{\circ}C$ while operating cooling fan only while cooling duration. Future aim is to realize more rapid temperature control and develop SMHA(special metal hydride actuator) by using Peltier module as a heating and cooling source.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.1090-1095
• /
• 1992

This paper describes the systematic control method of process information transfer and machine cell control in FMS implementation. We have constructed an experimental FMS computer network and control system. The system hardware consists of host computer to manage process data and information transfer of machine cells, cell control computers to control machine cells(NC lathe, machining center). On the other hand, software is made up of oredr management module, NC program searching and generation module, NC part program error check module and cell control module. In this study, we could arrive at conclusion as following : The first, each task could be accomplihed by the efficient information transfer in hierachical computer network. The second, data base system of part programs and process control data is needed for the efficint information transfer and production management. Lastly, expansion of FMS control system could be achieved by the hierachical and decentralized computer control system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.1
• /
• pp.11-18
• /
• 2010

GNSS(Global Navigation Satellite System) Ground Station performs GNSS signal acquisition and processing. This system generates error correction information and distributes them to GNSS users. GNSS Ground Station consists of sensor station which contains receiver and meteorological sensor, monitoring and control subsystem which monitors and controls sensor station, control center which generates error correction information, and uplink station which transmits correction information to navigation satellites. Monitoring and control subsystem acquires and processes navigation data from sensor station. The processed data is transmitted to GNSS control center. Monitoring and control subsystem consists of data acquisition module, data formatting and archiving module, data error correction module, navigation determination module, independent quality monitoring module, and system maintenance and management module. The independent quality monitoring module inspects navigation signal, data, and measurement. This paper introduces independent quality monitoring and performs the analysis using measurement data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.10
• /
• pp.2605-2619
• /
• 1996

In this paper, we evaluated performance of mobile exchange control part. Queueing network model is used for modeling of mobile exchange control part. We developed a call control processing and location registration scenartio which has a message exchange function between processors in mobile exchange control part. A network symbol are used the simulation models that are composed of the initialization module, message generation module, message routing module, message processing module, message generation module, HIPC network processing module, output analysis module. as a result of computer simulation, we obtain the processor utilization, the mean queue length, the mean waiting time of control part based on call processing and location registration capacity. The call processing and location registration capacity is referred by thenumber of call attempts in the mobile exchange and must be satisfied with the quality of service(delay time).

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.212-217
• /
• 2020

We studied on the design of a sprinkler control system that communicates with the administrator's mobile through a wireless communication network and a sprinkler unit that sprays water on the vegetation area. This sprinkler control system consists of a communication module that receives an operation signal for the operation of the sprinkler unit from the administrator's mobile, and a control module that controls the sprinkler unit according to the operation signal received through the communication module. It is also designed to control sprinkler units by measuring temperature, humidity, light intensities, vibration and field images in the vegetation area in real time through sensors and camera for each of them and comparing them with established limit criteria. The sprinkler allows the administrator to control the sprinkler more easily because the administrator operates the sprinkler through the mobile from a distance, and emergency situations occur and can respond quickly.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.87-99
• /
• 1999

A shop floor control system(SFCS) performs the production activities required to fill orders. In order to effectively control these activities, the autonomous agent-based heterarchical shop floor control architecture is adopted where a supervisor does not exist. In this paper, we define functional perspective of the heterarchical shop floor control using planning, scheduling, and execution modules. In particular, we focus on an execution module that can coordinate the planning and scheduling modules and a general execution module that easily can be modified to execute the other equipment. The execution module can be defined informally as a module that downloads and performs a set of scheduled tasks. The execution module is also responsible for identifying and resolving various errors whether they come from hardware or software. The purpose of this research is to identify all the execution activities and solving techniques under the assumptions of the heterarchical control architecture. And we model the execution module in object-oriented modelling technique for generalization. The execution module modeled in object-oriented concept can be adopted to the other execution module easily. This paper also proposes a classification scheme for execution activities of the heterarchical control architecture. Petri-nets are used as a unified framework for modeling and controlling execution activities. For solving the nonexistence of a supervisor, a negotiation-based solution technique is utilized.

• Management Science and Financial Engineering
• /
• v.3 no.2
• /
• pp.71-92
• /
• 1997

Developing FMS controllers has been a difficult problem largely because of the variety of the system configuration. The purpose of this paper is to develop a method of building an FMS controller. The controller consists of control module and execution module. A hierarchically layered structure of these modules is proposed. The control module generates abstract-level execution requested by identifying a set of activities that can be executed without creating any irregular state. The execution module transmits the requests to physical device controllers and reports back the completion of the requests to the control module. Both of these two modules use Petri Net-based models. In this paper, a controllable Petri Net model is automatically synthesized from declarative specifications provided by a user. An execution Petri Net model for the execution module is designed to ensure the consistency between the control module and the real target system. The controller operates in MMS on TCP/IP and UNIX environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.10
• /
• pp.60-67
• /
• 2006

This paper presents the temperature control in aluminum plate with Peltier module. From the experimental work, Peltier module is used to control the temperature of small aluminum plate for both heating and cooling with the control of current and fan ON/OFF. And current control of Peltier module was accomplished by PWM method. As a result of experiments, it is proper that operate cooling fan only while cooling duration and there exist a proper cooling current to drop temperature rapidly. It takes about 125sec to control temperature of aluminium plate between $30^{\circ}C$ and $70^{\circ}C$ and about 70sec between $40^{\circ}C$ and $60^{\circ}C$, in ambient temperature $28^{\circ}C{\sim}29^{\circ}C$ while cooling fan is operated only cooling duration. With the cooling current, temperature control of aluminum plate was accomplished more rapidly in comparison without cooling current. Future aim is to realize more rapid temperature control and develop SMHA(special metal hydride actuator) by using Peltier module as a heating and cooling source.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.1937-1941
• /
• 2007

During a process of a nanoimprint for manufacturing LCD, a small temperature variation on the LCD glass can cause thermal stress and generate unexpected displacement. To avoid this trouble, a precision temperature control unit using thermoelectric modules is appropriate for nanoimprint processes. The unit consists of an air control system, a cooling water control system, and a power control system. The air control system includes a thermoelectric module, thermocouples measuring temperatures of air and a duct-stale fin, and two air fans. The heat generated by the thermoelectric module is absorbed by the cooling water control system. The power control system catches the temperature of the thermoelectric module, and a PID controller with SCR controls the input power of the thermoelectric module. Temperature control performance is evaluated by experiment and simulation. The temperature control unit is able to control the exit temperature about ${\pm}2^{\circ}C$ from the incoming fluid temperature, and the error range is ${\pm}0.1^{\circ}C$. However, the control time is approximately 30minute, which needs further study of active control