• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1099-1109
• /
• 2020

The performance of gadolinium burnable absorber (GdBA) for reactivity control in UO₂ and (U, Th)O₂ fuels and its impact on spent fuel characteristics was performed. Five fuel assemblies: one without GdBA fuel rod and four each containing 16, 24, 34 and 44 GdBA fuel rods in both fuels were investigated. Reactivity swing in all the FAs with GdBA rods in UO₂ fuel was higher than their counterparts with similar GdBA fuel rods in (U, Th)O₂ fuel. The excess reactivity in all FAs with (U, Th)O₂ fuel was higher than UO₂ fuel. At the end of single discharge burn-up (~ 49.64 GWd/tHM), the excess reactivity of (U, Th) O₂ fuel remained positive (16,000 pcm) while UO₂ fuel shows a negative value (-6,000 pcm), which suggest a longer discharge burn-up in (U, Th)O₂ fuel. The concentration of plutonium isotopes and minor actinides were significantly higher in UO₂ fuel than in (U, Th)O₂ fuel except for ²³⁶Np. However, the concentration of non-actinides (gadolinium and iodine isotopes) except for ¹³⁵Xe were respectively smaller in (U, Th)O₂ fuel than in UO₂ fuel but may be two times higher in (U, Th)O₂ fuel due to its potential longer discharge burn-up.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.439-443
• /
• 2015

A control rod drive mechanism (CRDM) is an electromechanical equipment that provides linear movement for the control rods to control the nuclear reactivity in a nuclear reactor. A rod position indication system (RPIS) detects the control rod's position. To enhance the measurement accuracy of the system, a magnetostrictive type sensor with capability of generating operation limiting signals would be adapted instead of a conventional RPIS for a CRDM. An RPIS was modelled for a numerical analysis with the permanent magnets at the stationary limit positions and magnetic shielding plates with a moving permanent magnet. The performance analysis of the RPIS were conducted, and the results were discussed here.

• Journal of Periodontal and Implant Science
• /
• 제24권2호
• /
• pp.340-356
• /
• 1994

The purpose of this study was to assess the clinical and microbiological effect of chlorhexidine rinse and supragingival plaque control following scaling and root planing on adult periodontal disease. 14 patients with adult periodontitis were selected for the study . They had not taken antibiotics for 6 months and history of dental treatment for 6 months before the study. Patients received a supragingival scaling and root planing under local anesthesia, plaque control group was subjected to professional plaque control 2 times for a period 2 week, chlorhexidine rinse group were subjected to twice daily 0.2% chlorhexidine rinse for a period 2 week. Clinical examination (plaque index, gingival index, probing pocket depth) and distribution of the bacteria morphology of subgingival plaque were monitored on baseline (0 week), 1 week, 2 week, 4 week and 6 week. The results were as follows : 1. Plaque index in chlorhexidine rinse group , plaque control group and control group was significantly reduced during all weeks (P<0.05). 2. Probing pocket depth was significantly reduced at 2, 4, 6 week (P<0.05) in chlorhexidine rinse group and control group, plaque control group was significantly reduced during all weeks (P<0.05). 3. Gingival index was significantly improved at 2, 4, 6 weeks(P<0.05) in chlorhexidine group and plaque control group, control group was significantly improved at 1, 2, 4 weeks (P<0.05). 4. Percentage of cocci was significantly increased at 1, 2, 4 and 6 weeks in chlorhexidine rinse group and control group, plaque control group was significantly increased at 2, 4 and 6 weeks(P<0.05). 5. Percentage of non-motile rods in all group were not significantly changed when compared with those of baseline (0 week) (P<0.05). 6. Percentage of motile rods was significantly reduced during all weeks (P<0.05) in chlorhexidine rinse group, plaque control group was significantly reduced at 2, 4, 6 weeks and 1, 2 and 4 weeks in control group. 7. Percentage of spirochetes was significantly reduced during all weeks (P<0.05), plaque control group was significantly reduced at 2, 4, 6 weeks and 1, 2, 4 weeks in control group. This results were suggested that clinical and microbiological effect of chlorhexidine rinse and supragingival plaque control following scaling and root planing on periodontal disease

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.576-578
• /
• 2005

This paper deals with the design of power topology for nuclear power plants. Although rod control system is still classified into non-safety class. much attention on its reliability issue has been given so far because of its importance for the stable operation of the reactor in the plant. In terms of technical aspects, proposed design is reviewed to satisfy system requirements. This paper deals with a design of power topology for driving Control Element Drive Mechanism (CEDM) that is used to withdraw or insert control rods in nuclear reactor.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.253-256
• /
• 2000

In order to commercialize the low cost composite fabrication technology in the area of domestic aerospace structure field, Resin Transfer Molding process has been considered as an alternative process to replace the high cost autoclave technology. The end part for the development of RTM process is the control rod of flight control system of aircraft. A braided preform was triaxially designed to improve the dimensional stability and mechanical property in the direction of external loads. Through the flow analysis using CVFEM, the resin filling time was calculated and the resin injection method was determined. The results of the flow analysis were directly applied to RTM mold design. The control rod was successfully manufactured by RTM process using internal pressure. The length and outer diameter of the manufactured part are 1148mm and 32mm, respectively.

• KSBB Journal
• /
• 제21권5호
• /
• pp.401-404
• /
• 2006

MAA와 EGDMA를 단량체 및 가교제로 한 일체형 컬럼은 친수성의 구조표면을 하고 있어 쉽게 시료와 수소결합 등 강한 상호작용을 할 수 있다. 본 실험에서는 카페인과 트립토판을 분리물질로 선택하였으나 완전한 분리도를 얻을 수가 없었다. 이는 일체형 컬럼의 제조 시 여러 요인에 기인하다. 중합혼합반응물질의 양의 조성과 반응조건이 적절하지 못하는 등 원인으로 생각된다. 따라서 일체형 컬럼의 분리도를 향상시키기 위한 많은 실험이 요구된다.

• Journal of Periodontal and Implant Science
• /
• 제24권2호
• /
• pp.406-420
• /
• 1994

The purpose of this study was to compare the effects of Chlorhexidine, Listerine and hypertonic saline mouthrinse without periodontal pack during 2 weeks following periodontal surgery. Twelve patients were treated with modified Widman flap procedures. Each fourth patients assigned to chlorhexidine mouthrinse group, Listerine mouthrinse group and control group. Each group wasn't significant difference in clinical and microbiologic parameters at preoperation. Examination regarding plaque index, gingival index, pocket depth, change of gingival color postsurgically, pain index and contrast phase microscope were performed. Evaluations were made at the first, the second and the fourth weeks postsurgically. The results were as follows: 1. Chlorhexidine mouthrinse group and Listerine mouthrinse group were significantly different in plaque index at the first, the second and the fourth weeks 2. The pocket depth of three groups were significantly reduced at the fourth weeks. 3. Chlorhexidine mouthrinse group and Listerine mouthrinse group were significantly different in change of gingival color at the first week. 4. Cocci and non-motile rods were increased at the first and the second weeks. But, motile rods and spirochete were increased at the fourth weeks.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.687-692
• /
• 2009

The friction welding of Zr-based bulk metallic glass (BMG) rods and tubes to similar BMGs, and to crystalline metals were performed. An infrared thermal imager (FLIR-Thermal Cam SC-2000) was used to measure the temperature distribution at joining interface of the specimens during friction welding. All BMGs adopted in this study showed a successful friction joining to similar BMG. The shape of the protrusion formed at the weld interface were examined. In order to characterize the friction weld interface, the micrographic observation and the X-ray diffraction analysis on the weld cross-section were carried out. The obtained results were discussed based on the temperature distribution measured at the weld interface A successful joining of the BMGs to crystalline metals could be obtained for certain pairs of the material combination through the precise control of the friction condition. The residual strength after dissimilar friction welding of BMG was evaluated by the four-point bending test and compared with the cases of friction welding to similar materials.

• Nuclear Engineering and Technology
• /
• 제50권2호
• /
• pp.292-296
• /
• 2018

Recent events in the nuclear industry have resulted in a movement towards increased seismic and LOCA excitations and requirements that challenge current fuel designs. AREVA NP's GAIA fuel design introduces unique and robust characteristics to resist the effects of seismic and LOCA excitations. For demanding seismic and LOCA scenarios, fuel assembly spacer grids can undergo plastic deformations. These plastic deformations must not prohibit the complete insertion of the control rod assemblies and the cooling of the fuel rods after the accident. The specific structure of the GAIA spacer grid produces a unique and stable compressive deformation mode which maintains the regular array of the fuel rods and guide tubes. The stability of the spacer grid allows it to absorb a significant amount of energy without a loss of load-carrying capacity. The GAIA-specific grid behavior is in contrast to the typical spacer grid, which is characterized by a buckling instability. The increased mechanical robustness of the GAIA spacer grid is advantageous in meeting the increased seismic and LOCA loadings and the associated safety requirements. The unique GAIA spacer grid behavior will be incorporated into AREVA NP's licensed methodologies to take full benefit of the increased mechanical robustness.

• 토지주택연구
• /
• 제2권4호
• /
• pp.509-516
• /
• 2011

프리캐스트 콘크리트는 현장작업을 최소화하고 공사품질을 보장할 수 있으며 공사기간을 단축시킬 수 있는 장점을 갖고 있다. 특히 계단실의 경우 재래식 거푸집을 사용할 경우 골조공사의 품질저하와 다수의 인력투입에 따른 생산성의 저하 및 시공의 어려움 등의 문제점이 있다. 본 연구에서는 PC 계단 접합부 상세를 개발하고, 제안한 접합부의 일체성확보와 사용성 및 안전성을 검증하기 위해 구조성능실험을 수행하였으며, 단순 핀접합 실험체에 비해 구속도의 증가, 내력, 강성 및 연성의 증가를 확인할 수 있었다.