• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.161-166
• /
• 2003

In order to improve the fatigue lift of a lower control arm in the vehicle suspension, a new shape optimization procedure is presented. In this approach, the shape control point concept is introduced to reduce the numbers of shape design variables. Also, the two-level orthogonal way is employed to evaluate the design sensitivity of fatigue life with respect to those shape design variables, because the analytical design sensitivity information is not directly supplied from the commercial CAE softwares. In this approach, only the six design variables are used to approximate the shape of lower control arm. Then, performed are only 10 fatigue life analyses including the baseline design, 8 DOE models and the final design. The final design, the best combination obtained from the sensitivity information, can maximize the fatigue lift nearly two times as that of the baseline design, while reducing the 12 percentage of weight than it.

• 한국산업융합학회 논문집
• /
• 제19권2호
• /
• pp.69-74
• /
• 2016

This study proposes a new approach to design of the robust control application of a mobile manipulator with dual-arm. The mobil manipulator robot system consists of 12 DOF manipulators and a mobile robot. Kinematics of the robotics has been analyzed and simulated to verify reliability. A position-based torque control technique is applied to the robot by adding an outer loop to interact with the environment. Experimental studies of torque control applications of robot arm and interaction with a user operator are conducted. Experimental results has been proved that the robot arm performed regulated to follow the desired reference.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.351-361
• /
• 2021

This study proposes an intelligent control of manufacturing robot with dual arm based on neural network for smart factory implementation. In the control method of robot system, the perspectron structure of single layer based on neural network is useful for simple computation. However, the limitations of computation are emerging in areas that require complex computations. To overcome limitation of complex parameters computation a new intelligent control technology is proposed in this study. The performance is illustrated by simulation and experiments for manufacturing robot dual arm robot with eight axes.

• 정보보호학회논문지
• /
• 제33권2호
• /
• pp.319-323
• /
• 2023

프로세스 내부 격리(Intra-process Isolation)에서 파일 디스크립터는 메모리 이외에 또 다른 공격 벡터로써 작용한다. 공격자는 파일 디스크립터를 변조함으로 주어진 권한 이상의 파일에 읽거나 쓰는 방식을 통해 격리된 환경을 벗어날 수 있다. 본 논문에서는 ARM 아키텍처의 하드웨어 보안 기술인 PA(Pointer Authentication) 기반의 경량화된 새로운 파일 디스크립터의 권한 관리 시스템을 제시한다. 우리의 무결성 보장 기법은 리눅스 커널 모듈의 형태로 제작되었으며 5% 정도의 오버헤드만으로 파일 디스크립터에 대한 권한 관리를 수행하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2116-2119
• /
• 2005

Inverted pendulum is a classical example and a famous tool for testing the effectiveness of many control schemes. Owing to their nonlinearity and unstable characteristic, a controller development either for swinging-up or stabilizing its upright position had been a great interest of many researchers. In this paper, the swinging-up control of the inverted pendulum using energy control will be presented. However, the saturation function in its control law could harm the experimental equipments. In addition, this swinging-up method did not consider limited sector of the arm angle to avoid another hazard, for instance, the twisted cable in the apparatus. Therefore, in this paper the position control of the arm angle using simple PD control in accordance with the energy control is proposed. Consequently, the limited arm sector angle can be achieved and the saturation function can also be replaced effectively by the PD control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.86-91
• /
• 1988

The analytical studies and applicability of the implementation of the controller for the simple flexible arm studies and discussed in this thesis with the goal of developing flexible manipulator arm control. Minimum-time position control and quadractic-optimal control are investigated in this thesis. Its validity has been established using numerical simulations.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.105-111
• /
• 2015

Car manufacturers and part manufacturers each have their own criteria with regard to strength, stiffness and NVH performance levels. Part manufacturers typically investigate such performances according to the part unit. To do this, the part manufacturer receives information from the relevant car maker. However, the information provided by the car maker is limited, making it difficult to develop a part which meets all of the design requirements specified by the car unit overall. To overcome this difficulty, the utilization of a VPG system is recommended for the designer. In this study, the durability performance of an optimized control arm as suggested in a previous study was investigated using the ETA-VPG, LS-dyna and FE/safe software packages. ETA-VPG provides several types of suspension and steering parts. In this study, a complete car is created using the library included in ETA-VPG, with the exception of the control arm. We also conducted a virtual proving ground analysis to predict the life cycle of the control arm.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.35-47
• /
• 2004

In this paper presents a new approach to the design and real-time implementation of fuzzy control system based-on digital signal processors(DSP:IMS320C80) in order to improve the precision and robustness for system of industrial robot(Dual-Arm with 8 joint Robot). The need to meet demanding control requirement in increasingly complex dynamical control systems under significant uncertainties, leads toward design of intelligent manipulation robots. The IMS320C80 is used in implementing real time fuzzy control to provide an enhanced motion control for robot manipulators. In this paper, a Self-Organizing Fuzzy Controller(SOFC) for the industrial robot manipulator with a actuator located at the base is studied. A fuzzy logic composed of linguistic conditional statements is employed by defining the relations of input-output variables of the controller. In the synthesis of a FLC(Fuzzy Logic Controller), one of the most difficult problems is the determination of linguistic control rules from the human operators. To overcome this difficult SOFC is proposed for a hierarchical control structure consisting of basic and high levels that modify control rules. The proposed SOFC scheme is simple in structure, Int in computation, and suitable for implementation of real-time control. Performance of the SOFC is illustrated by simulation and experimental results for a Dual-Arm robot with eight joints.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.405-408
• /
• 1996

Several papers have already been reported on the flexible manipulator with constant arm length. Some of industrial manipulators, however, have sliding joints. It means that the length of their arm or link varies with time. This paper discusses the trajectory contro lof such a manipulator model, and shows some of the experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.547-551
• /
• 1996

In this paper, robust vibration control of a one-link flexible robot arm based on variable structure system is discussed. We derive dynamic equations of it using a Lagrangian assumed modes method based on Bernoulli-Euler Beam theory. The optimal sliding surface is designed and the problem of chattering is also solved by the adoption of a continuous control law within a small neighborhood of the switching hyperplane.