• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.1 s.20
• /
• pp.59-68
• /
• 2006

Flow separation of recirculation zone by increasing of flow and change of its direction at confluence results in backwater due to conveyance reduction. The hydraulic characteristics of flow separation are analysed by experimental results of flow ratios of tributary and main streams and approaching angles. The boundary of flow separation by dimensionless length and width is defined by the streamline of zero and this definition agrees well to the existing investigation. Because flow separation doesn't appear in small flow ratio and approaching angle of $30^{\circ}$, the equation of flow separation with flow ratio and approaching angle is provided. In flow separation consideration and comparing with previous results, the existing equations of dimensionless length and width ratios by function of approaching angle, flow ratio, and downstream Froude number are modified and also contraction coefficient and shape factor are analysed. Dimensionless length and width ratios are proportional to the flow ratio and approaching angle. In analysis of water surface profiles, the backwater effects are proportional to the flow ratio and approaching angle and the magnitude at outside wall is greater than that of inside wall of main stream. The length, $X_l$ from the beginning of confluence to downstream of uniform flow, where the depth is equal to uniform depth, is characterized by width of stream, flow ratio, approaching angle, and contraction coefficient. The ratios between maximum water depth by backwater and minimum depth at separation are analysed.

• Journal of the Korea Convergence Society
• /
• v.7 no.2
• /
• pp.43-52
• /
• 2016

The purpose of this study was to suggest the effective squat exercise position to strengthening vastus medialis oblique, and vastus lateralis in quadriceps. Subjects were twenty patients with patellofemoral pain syndrome (PFPS) volunteered to participate in this study. All subjects were applied to static squat convergence exercise with knee flexed $45^{\circ}$, $60^{\circ}$, and $90^{\circ}$ for 30 seconds total 5 times. Measurement variables were maximal voluntary isometric contraction (MVIC) of the quadriceps, Q angle and length of thigh. Those were measured before and after the squat exercise on knee joint angle, change rate of which were used for statistical analysis. As a result, squat exercise with knee flexed $90^{\circ}$ increase significantly among knee joint angle in the MVIC change rates of quadriceps (p<.05), however the rates of Q-angle and length change of thigh showed no significant difference. Therefore, this findings suggest that squat exercise with knee flexed $90^{\circ}$ strengthen quadriceps effectively in patients with PFPS.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.40-47
• /
• 2018

This study was conducted to examine changes in the muscle activity of the triceps surae, specifically the gastrocnemius and the soleus, depending on the angle of the knee joint during the manual muscle test (MMT) of the plantar flexion of the ankle. The muscle activity of the medial and lateral heads of the gastrocnemius was statistically significantly reduced when the angle of the knee joint was $15^{\circ}$, $30^{\circ}$, and $45^{\circ}$ compared to when the angle was $0^{\circ}$. However, there was no statistically significant difference in muscle activity at the angles of $15^{\circ}$ and $30^{\circ}$ or $45^{\circ}$. There was no statistically significant difference in the muscle activity of the soleus depending on the angle of the knee joint. The ratio of the muscle activity of the soleus to that of the triceps surae showed a statistically significant increase when the angle was $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ compared to when the angle was $0^{\circ}$. However, there was no statistically significant difference in muscle activity at the angles of $15^{\circ}$ and $30^{\circ}$ or $45^{\circ}$. When the angle of the knee joint was $15^{\circ}$ or higher during the test of the isolated soleus, the muscle activity of the gastrocnemius was reduced. These results indicate that the angle is suitable for the test of the isolated soleus, but there was no statistically significant difference in the muscle activity of the gastrocnemius when the angle was higher than $15^{\circ}$. Therefore, it can be concluded that the most suitable angle of the knee joint for the isolated MMT test of the soleus is $15^{\circ}$.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.2
• /
• pp.2071-2076
• /
• 2020

Background: Based on the understanding of the muscle activation relationship between the infraspinatus and posterior deltoid muscles to according to the angle of motion during external rotation on glenohumeral joint, effective shoulder joint strengthening exercise for the prevention and rehabilitation of shoulder injury due to muscle strength imbalance can be performed by achieving the ideal muscle activity ratio during exercise. Objectives: To compare and analyze the muscle activation changes and activity ratio of the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle. Design: Quasi-randomized trial. Methods: The study included 48 healthy male and female adults who provided informed consent for participation in the study. All the subjects performed isometric glenohumeral external rotation by setting the angle of motion to 30°, 45°, and 60° using a 5 kg resistance weight pulley. On surface electromyography, the differences in muscle activation and activity ratio between the infraspinatus and posterior deltoid muscles were investigated. Results: A significant difference in muscle activation was found in the comparison between the infraspinatus and posterior deltoid muscles according to the glenohumeral external rotation angle (P<.05). The muscle activation levels of the infraspinatus and posterior deltoid muscles were highest at the external rotation angles of 30° and 60°, respectively. The muscle activity ratio between the infraspinatus and posterior deltoid muscles also showed a significant difference (P<.05) and was highest at the shoulder external rotation angle of 30°. Conclusion: The findings of this study suggest that muscle activity is the highest at the shoulder external rotation angle of 30° in healthy individuals.

• Journal of The Korean Society of Integrative Medicine
• /
• v.2 no.1
• /
• pp.15-21
• /
• 2014

Purpose : The aim of this study was to find out differences between muscle activity of quadriceps according to hip angle. Method : 40 healthy adults produced maximum isometric muscle contraction of quadriceps femoris and each part of the quadriceps femoris were measured with a surface EMG in hip joint angle of $90^{\circ}$, $135^{\circ}$, $180^{\circ}$. Result : There was no significant difference between muscle activity of vastus medialis and lateralis according to hip angle. But there was significant difference in muscle activity of rectus femoris and the muscle activity was maximum at 135 degrees of hip angle. Conclusion : In conclusion, maximum muscle activation of rectus femoris is affected by hip angle, and the findings from this study may be helpful for physical therapists in selecting hip position when instructing patients to do Q-setting exercise. So, we suggest that patients perform Q-setting exercise at 135 degrees of hip angle for the best result.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.5
• /
• pp.473-479
• /
• 2008

Asians tend to have prominent mandibular angle. The causes of wide lower third of the facial contour are obtuse mandibular angle and hypertrophy of masseter muscles. In cases of hypertrophy of masseter muscles, conventional treatment intends to the contraction of masseter muscle. Recently, volumetric reduction of masseter muscles using botulinum toxin type A injection and radiofrequency (RF) reduction have been introduced. The use of RF energy for masseter muscle reduction is known as a safe, simple, and effective method for aesthetic lower facial contouring. The purpose of this study is to present the effects of RF reduction applied to hypertrophy of masseter muscles, to review and to encourage RF practices in oral and maxillofacial region.

• Fire Science and Engineering
• /
• v.16 no.4
• /
• pp.59-64
• /
• 2002

Investigation of flow characteristics on pressure loss and cavitations of the butterfly valve has been carried out. The pressure loss coefficient on opening angle of valve has been formulated by applying the Carnot's equations. Cavitations (such as cavitation Inception, super cavitation inception, cavitation damage inception, choking cavitation) have been predicted from the pressure loss coefficient of valve. The prediction of pressure loss and cavitation has been carried out change of the thickness ratio on opening angle of valve. The prediction data is utilize to necessary engineering data to develope of the butterfly valve.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.117-120
• /
• 2001

Low back pain has been known as the most frequent musuculoskeletal disorders in modern industrial society and cost by low back pain is increasing mon and more. The asymmetric lifting has been identified as a major risk factor of low back pain. In this study, the muscle activity and muscle exertion level during asymmetric load handling (without trunk flexion) was estimated. The results of normalized MVC measurement were decreased about 16％, 24％, 34％ respectively as the asymmetric angle was $30^{\circ}$, $60^{\circ}$, $90^{\circ}$. From the results of EMG measurement contralateral muscles were more active than ipsilateral muscles. RMSEMG values of right erector spinae muscles were decreased as the work posture went to 90$^{\circ}$ and those of left erector spinae muscles were increased until the asymmetric angle was 40$^{\circ}$ but decreased continually over 40$^{\circ}$. And for seven of subjects, activities of left and right latissimus dorsi muscles were maintained constantly, while for remainer, those were irregular.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.265-266
• /
• 2006

Superconductor is developed for applications in high-power devices such as power-transmission cables, transformers, motor and generators. In such applications, HTS tapes are subjected to various kinds of stress or strain. In the fabrication of the devices, the critical current (Ic) of the high temperature superconductor degrades due to many reasons including the tension applied by bending, twist and thermal contraction. In particular manufactured HTS cable, we need pitch angle controls. This paper is analyzed that Ic characteristics is changed pitch angle of HTS tape. These results will amount the most important basis data in HTS cable.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.69-74
• /
• 2011

Despite most of tasks in manufacturing, construction and agriculture, etc., were currently mechanized and automated, manual materials handling still existed in atypical working condition. In case of manual materials handling, repetitive work, inappropriate working posture, excessive force, contact stress might cause overload, which could lead to work-related musculoskeletal disorders and low back pains. On this basis, the goal of this study is to reveal the effects of various lifting postures of trunk angles and lower extremity postures on maximum holding time(MHT). Twenty two subjects were recruited from a university population. The experiment was designed by a combination of three trunk angle ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) and three lower extremity postures(straight, bent, kneeling). Before experimental trials, subjects performed MVC(maximum voluntary contraction) exertions in three trunk angles ($0^{\circ}$, $20^{\circ}$, $60^{\circ}$) to calculate 30%MVC at designated postures. In each trial, they were required to hold the handheld load(30%MVC) for a designated posture as long as they could. The results of MVC by trunk angles were measured in $0^{\circ}$ > $20^{\circ}$ > $60^{\circ}$ orders, but those of MHT measured in $20^{\circ}$ > $0^{\circ}$ > $60^{\circ}$ orders. These results showed that straight posture is the ideal working posture in work exerted a strong force for a short time, but the ability to work might be improved in the trunk angle $20^{\circ}$ in work required 30%MVC for a long time. Also, results of MVC and MHT by lower extremity postures measured in straight > bent > kneeling orders.