• International Journal of Automotive Technology
• /
• 제8권5호
• /
• pp.555-562
• /
• 2007

The Variable Valve Timing(VVT) system for high performance is a key technology used in newly developed engines. The system realizes higher torque, better fuel economy, and lower emissions by allowing an additional degree of freedom in valve timing during engine operation. In this study, a model-based control method is proposed to enable a fast and precise VVT control system that is robust with respect to manufacturing tolerances and aging. The VVT system is modeled by a third-order nonlinear state equation intended to account for nonlinearities of the system. Based on the model, a controller is designed for position control of the VVT system. The sliding mode theory is applied to controller design to overcome model uncertainties and unknown disturbances. The experimental results suggest that the proposed sliding mode controller is capable of improving tracking performance. In addition, the sliding mode controller is robust to battery voltage disturbance.

• 전력전자학회논문지
• /
• 제3권3호
• /
• pp.240-245
• /
• 1998

본 논문에서는 전동기의 슬라이딩 모드 제어기가 설계되었다. 슬라이딩 모드 제어기의 단점인 채터링 현상을 제거하기 위해 연속치 제어입력이 제안되었으며 제안된 기법으로 고속 마이크로 프로세서인 DSP를 이용한 유도전동기의 속도제어를 보였다. 슬라이딩 모드하에서의 유도 전동기의 각속도가 지정된 궤적을 추종하도록 동작한다. 실험 결과를 통해 제안된 방법의 유용성을 보였다.

• 대한전기학회논문지
• /
• 제41권2호
• /
• pp.135-143
• /
• 1992

A novel sliding mode control with disturbance observer for position control of DC servo motor is presented. The conventional sliding mode controller changes the control structure depending on the state of switching surface and consequently, the control law is discontinuous and theoretically chatters at an infinite frequency. To overcome this problem in view of the practical implementation, the disturbance observer is used to compensate the effects of the parameter variations and the load disturvances. We can obtain the performance predetermined by the switching surface with continuous control law while the controlled system remains robust. The performance of the proposed controller with that of the conventional sliding mode controller through digital computer simulation and experiment.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.1-8
• /
• 2010

A new scheme for sliding-mode control (SMC) of DC-DC converters with a constant switching frequency is proposed. The scheme is based on the averaging model and the output signal of the controller is $d^+$ or $d^-$ instead of the on or off signal of a direct sliding-mode (SM) controller or the continuous signal d = $u_{eq}$ of an indirect SM controller. Two approaches using the new scheme are also proposed and the design procedures for a buck converter are given in detail. The first approach called constant $d^+$ and $d^-$ SMC is simple, cost effective and dynamically fast. In order to improve the dynamic characteristics of the reaching phase and to alleviate chattering, the second approach called reaching law SMC is also presented. Analyses and simulation results demonstrate the feasibility of the proposed scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.231-235
• /
• 1988

In this paper we present a new method to control system design using a sliding mode. The objective of this research is to develop the algorithm for the sliding mode control which is able to remove the chattering phenomena and to reduce the reaching phase. To accomplish this approach we introduce switching dynamics instead of switching logics to obtain the sliding mode. Consequently, we can obtain the new design approach which is much simpler than the VSS theory. And there do not exist chattering phenomena in this method because the obtained control input are continuous. Simultaneously we can reduce the reaching phase by a suitable choice of design factor. Numerical examples are discussed as illustration.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1300-1305
• /
• 1990

A VSS observer-based sliding mode control is described for continuous-time systems with uncertain nonlinear elements, in which the Euclidean norm of unknown element is bounded by a known value. For a case of complete state information, we first derive a sliding mode controller consisting of three parts: a linear state feedback control, an equivalent input and a min-niax control. It is then shown that the present attractiveness condition is simpler than that for a case without using the concept of equivalent input. We next design a VSS observer as a completely dual form to the sliding mode controller. Finally, we discuss a cas of incomplete state information by applying the VSS observer.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.62-68
• /
• 2001

In this paper it is proposed an advanced modified sliding mode control of a rotor field oriented control of induction motor. The application of this unconventional control has very good results, such as disturbance rejection and nice dynamic properties. Stability can be guaranteed even in the worst situation. A conventional "sliding mode" controller is characterised by fast switching control signal, which causes the chattering of the drive system. To overcome this problem, a modified law is used, by introducing a hysteresis band and a continuous control, which modifies the conventional law. The control is accomplished with dual TMS320C44 floating-point digital signal processor. The validity of the proposed method was verified by experiment on the propulsion system simulator, used for the development of Korean High-Speed Railway Train(KHSRT).in(KHSRT).

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1705-1714
• /
• 2018

This paper develops a novel controller called iterative learning sliding mode (ILSM) to control linear and nonlinear fractional-order systems. This control applies a combination structures of continuous and discontinuous controller, conducts the system output to the desired output and achieve better control performance. This controller is designed in the way to be robust against the external disturbance. It also estimates unknown parameters of fractional-order systems. The proposed controller unlike the conventional iterative learning control for fractional systems does not need to apply direct control input to output of the system. It is shown that the controller perform well in partial and complete observable conditions. Simulation results demonstrate very good performance of the iterative learning sliding mode controller for achieving the desired control objective by increasing the number of iterations in the control loop.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.217-224
• /
• 2005

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system because the UFV contains both pitch and depth angle variables as well as multiple control planes, it requires robustness because of the possibility that it may encounter uncertainties such as parameter variations and disturbances, it requires a continuous control input because the system that has reduced power consumption and acoustic noise is more practical, and further, it has the speed dependency of controller parameters because the control forces of control planes depend on the operating speed. To solve these problems, an adaptive fuzzy sliding mode controller (AFSMC), which is based on the decomposition method using expert knowledge in the UFV depth control and utilizes a fuzzy basis function expansion (FBFE) and a proportional integral augmented sliding signal, is proposed. To verify the performance of the AFSMC, UFV depth control is performed. Simulation results show that the AFSMC solves all problems experienced in the UFV depth control system online.

• 전기전자학회논문지
• /
• 제9권1호
• /
• pp.47-56
• /
• 2005

본 연구에서는 불확실성과 부하 변동 하에 브러쉬없는 직접구동 전동기의 정확한 사전결정 추적성능을 제공하기 위한 새로운 개선된 강인한 가변구조 추적 제어기를 설계하였다. 리칭 페이즈를 제거하기 위한 특수 적분 슬라이딩 변은 서보 전동기의 초기 위치부터 이상 슬라이딩 모드와 가상 이상 슬라이딩 궤적을 정의한다 . 영이 아닌 슬라이딩 면에 의하여 발생되는 추적오차를 유도하였다. 외란 관측기를 갖는 연속 입력을 제안하여 불확실성과 부하 변동 하에 사전 결정 가상 이상 슬라이딩 궤적을 사전 값 내에 추적하도록 한다. 제안된 알고리듬의 유용성을 부하 변동 하에 브러쉬없는 직접구동 전동기에 대한 비교 시뮬레이션으로 입증한다.