• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.59-62
• /
• 2007

The basic concept and preliminary performance results of a miniaturized electroosmotic (EO) pump with diaphragms were included in the present study. The separation of an electroosmotic pumping liquid from a drug using diaphragms is mainly to have a freedom in choosing an electroosmotic pumping liquid and to achieve the optimal drug delivery, and, preferably its precise control. We performed maximum flow rate, maximum pressure, and maximum current measurements with and without diaphragm designs. As a result, the effect of diaphragms on pump performance at the maximum condition is small. However, the presence of diaphragms does not allow indefinite continuous pumping.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1243-1250
• /
• 2008

LRT System Application Project is performed for the purpose of technical advancement and stabilization of K-AGT system from the viewpoint of practical use and commercialization. For those purpose, the performance test and evaluation procedure for signaling system are developed, and the scheme of verifying the performance and function of signaling system under multi-train and driverless control environment is being conducted. In general, the railway have kept their systems highly safe and reliable through the ongoing efforts over a period of many years. This has been achieved primarily by continuous improvements, which mean that there is a dearth of experience in the introduction of innovative new systems. Therefore it is said that comparing a new system that features a completely new architecture with a conventional one may be difficult. In this paper, we investigate the evaluation method for Radio based-Communication Based Train Control system from case study.

• 유통과학연구
• /
• 제12권12호
• /
• pp.119-130
• /
• 2014

Purpose - Franchise industries are significant both socially and economically. However, with increasing interest, there are manifold problems. It is necessary to seek measures for mature operation constantly despite unprepared franchisors, negative perceptions of the media and society toward franchise, and rapid changes in business start-up trends and propensity to consume that make business start-ups difficult. The paper aims to explain the effects of relational commitment and performance on the franchisor's management characteristics and justice in the food service franchise system. Research design, data, and methodology - This is an exploratory survey examining franchising in Korea. Based on a literature synthesis, we extract five constructs: managerial characteristics, support, fairness, trust, and satisfaction. We hypothesize that these factors influence the trust, satisfaction, and performance of franchisees. To examine these hypotheses empirically, we conducted a survey on the database of the Franchising Council of Korea. The study employs data from May to September 2014. In total, 135 completed questionnaires were received, of which 128 were usable. The data was analyzed with SPSS/PC 22.0. First, to test unidimensionality and nomological validity of the measures of each construct, we employed a scale refinement procedure. The result of a reliability test with Cronbach's α and factor analysis warranted unidimensionality of the measures for each construct. In addition, nomological validity of the measures was warranted from the result of the correlation and regression analysis. By analyzing the data, we can confirm most hypotheses. Results - Frist, franchisor characteristics have a positive effect on trust and satisfaction. Second, franchisor fairness has an effect on trust and satisfaction. Third, franchisor support has an effect on satisfaction. Further, the franchisee trust has an effect on satisfaction. Fourth, the satisfaction of a franchisee with a franchisor affects the performance of a franchisee. Finally, there is a possibility that not only franchisee performance but also increasing the credibility and improving the image of the franchisor through communication between franchisor and franchisee can improve franchisees' performance and satisfaction by motivating the franchisee for sustainable growth. Franchisers should endeavor for franchisees to obtain stable revenue with continuous and practical support. They should recognize that they can expand their business by supporting their franchisees. Franchisors should not only instantly respond to franchisees' troubles with interactive communications but also raise the ability of supervisors for better support. Franchisors should share their visions and goals with their franchisees and provide systematic and continuous support based on trust and clear company management. Franchisees should understand franchisors' position as well as participate in establishing the basic franchise system. Contributions - The paper contributes to understanding franchising in Korea. It offers insights and assistance to franchisors hoping to start franchises. This paper explores measurement issues related to franchisee performance by estimating its determinant factors (managerial characteristics, support, fairness, trust, and satisfaction). This study provides franchisors and practitioners planning to extend their franchising business with some practical knowledge.

• 한국생활과학회지
• /
• 제12권5호
• /
• pp.595-604
• /
• 2003

This study was designed to investigate the difference in the autonomous supervision and role performance according to the socio-demographic factors of the teachers. Also, the relation of the autonomous supervision and the role performance was examined. This research was conducted using the questionnaire to 394 teachers of national, public, and private kindergarten in Chung-buk province. Data were analyzed with the SPSSWIN program by the frequency, percentage, t-test, ANOVA, Scheffe post-hoc test and Pearson's correlation analysis. The results were summarized as follows: First, levels of autonomous supervision of kindergarten teachers were high in general and there were significant differences according to the institution, age, scholastic ability, and the career. The accomplishment in the public kindergarten was higher than that in the private one. Moreover, the higher the teacher's age, career, and scholastic ability, the higher the accomplishment. Second, levels of role performance of the kindergarten teachers were excellent, but the levels of role performance were higher in the public kindergarten than in the private one because the public teachers who did not transfer much had more chances of continuous education and higher responsibility. The role performance of teachers was found to be relatively higher in the kindergarten in countries than in cities because there were more public kindergartens than private ones in countries. Third, there were significant correlations between the lower factors of autonomous supervision and the role performance of the kindergarten teachers. Because the various types of the autonomous supervision can help the teacher's role performance, various types of the autonomous supervision which fit the developmental stages of the teachers will be desirable.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.72-76
• /
• 2010

초저온 추진제를 사용하는 액체로켓용 인젝터의 개발을 위해서는 수류시험과 더불어, 연소시험을 통한 성능검증, 점화 cyclogram의 최적화 및 내부연소 유동장에 대한 열-유체역학적 특성에 대한 연구가 필요하다. 본 연구에서는 대학실험실 급에서 운용할 수 있는 범위의 가압식 초저온 추진제 공급 및 제어장치를 이용하여, LOX-$GCH_4$를 추진제로 하는 동축형 스월 인젝터의 연소시험을 수행하였다. 점화 cyclogram 최적화를 통해 O/F ratio 약 2.80, 총질량유량 약 0.19 kg/s의 LOX-$GCH_4$ 추진제를 점화 및 연소시켰고, 연소실 압력은 1.43 MPa, 추력은 38.7kgf으로 측정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.639-642
• /
• 2005

HTS Transformer developing is developing a power distribution and transmission class HTS transformer that is one of the 21st century superconducting frontier projects. Therefore, we prepared the model, that is Z continuous winding from Kapton insulated Cu tape for a small simulated the HTS transformer. For the development of electrical insulation design of a HTS transformer with Z continuous winding, we have been discussed insulation composition and investigated breakdown characteristics such as breakdown of liquid $N_2(LN_2)$, polymer and surface flashover on FRP and breakdown-surface combination in $LN_2$. Also we have been designed and manufactured a bobbin that has spiral slot for the Z continuous winding. The Z continuous winding mini-model from Kapton film insulated Cu tape for simulated 22.9kV class HTS transformer has been constructed using 0.1 % breakdown strength obtained by Weibull distribution. The widing model was measured their insulation characteristics such as ac (50kV, 1min) and impulse (154kV, $1.2\times50{\mu}s$ full wave, 3 times) withstand test and its excellent performance was confirmed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권1호
• /
• pp.148-155
• /
• 2010

본 연구는 지하주차장 건물의 바닥구조를 구성하기 위한 방안으로서 프리스트레스를 도입한 일방향 장선구조인 MRS공법을 제안하고, MRS공법의 연속단 접합부에 대한 구조실험을 수행함으로써 휨거동 특성과 접합상세의 적정성을 평가하였다. 연속단 접합부는 4개의 실험체를 제작하였으며, 연속단 접합부에 부모멘트가 작용하도록 실험을 수행하였다. 실물크기로 제작한 MRS 연속단 접합부는 접합부의 구조상세와 상관없이 충분한 휨강성의 발현과 함께 연성적인 휨파괴 거동을 보여주었다. 특히 지붕층에 위치한 MRS 연속단 접합부는 큰 값의 부모멘트를 저항하기 위한 인장철근의 양을 최대철근비 이하로 설계할 수 있으며, 최종파괴 모드는 휨에 의해 지배되는 거동특성을 보여주었다. 따라서 제안된 MRS공법은 우수한 지압성능과 연속단 구축이 용이한 접합부 상세를 갖는 것으로 평가되었다.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.89-97
• /
• 2008

This study has provided the answer which construction companies to make complete competitive factors for sustainable growth in construction industry with to 21C environment changes. So the purpose of study is to provide a guideline for establishing the strategy of existence and growth. In order to carry out this purpose of study, above all after has been reviewed Quality Management by considering the characteristics of construction companies, TQM component and business performance, the study has been made a close inquiry in causal relationship between TQM component(leadership, participation, education-training) and business performance(safety) in construction industry. The result of the study can be summarized as follows : First, a test was conducted to whether TQM component(participation) has a significantly positive effect on business performance(safety). Second, it was found that there was a positive casual relationship between each of the TQM factors and business performance(safety). TQM(Total Quality Management) factors had great influences on the business performance of construction companies. So construction companies needed to make continuous efforts to enhance the business performance through TQM approach.

• 대한간호학회지
• /
• 제50권1호
• /
• pp.1-13
• /
• 2020

Purpose: The purpose of this study was to construct and test a structural equation model on nursing work outcomes based on Youssef and Luthans' positive psychological capital and integrated conceptual framework of work performance. Methods: This study used a structured questionnaire administered to 340 nurses. Data were analyzed using structural equation modeling. Results: Positive psychological capital showed indirect and direct effects on job satisfaction, retention intention, organizational citizenship behavior, and nursing performance. While, the nursing work environment had direct and indirect effects on job satisfaction and nursing performance, it only had indirect effects on intention to work and organizational citizenship behavior. Additionally, a mediating effect on retention intention and organizational citizenship behavior was found between job satisfaction and nursing performance variables. Conclusion: The nursing organization needs to build a supportive work environment and reinforce positive psychological capital to improve nursing performance. Additionally, it needs to actively manage the necessary parameters involved in the stages of job satisfaction, retention intention, nursing performance, and organizational citizenship behavior of nurses. The findings propose the continuous management of nursing personnel based on nurses' attitude outcome, behavioral intention, behavioral outcome, and stage of role performance.

• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.1-9
• /
• 2017

Recently, there has been a continuous researches on solders having sophisticated and improved performance due to demand for high-density and miniaturization of electronics, and development of solder for automotive electronics which can be used in harsh environment. When developing a new solder alloy, there is a wettability of solder on substrate for things to consider, and the wetting balance test is one of the methods for measuring that one. In this paper, the wetting balance test is introduced, and the calculus of the surface tension of solder and the contact angle between solder and substrate using wetting curve obtained is introduced too. In detail, the principle and test method of the wetting balance test, the introduction of the parameters with important meaning in the wetting curve, the method of calculating the contact angle as well as the surface tension of the solder using the shape of the solder meniscus.