A Study on the Insulation Basis of Hts Transformer

초전도 변압기의 절연기반 연구

  • Cheon, Hyeon-Gweon (Department of Electrical Engineering, Gyeongsang National University and Automation and Computer Research Centre of Engineering Research Institute) ;
  • Kwag, Dong-Soon (Department of Electrical Engineering, Gyeongsang National University and Automation and Computer Research Centre of Engineering Research Institute) ;
  • Yun, Mun-Soo (Korea Electrotechnology Research) ;
  • Kim, Sang-Hyun (Department of Electrical Engineering, Gyeongsang National University and Automation and Computer Research Centre of Engineering Research Institute)
  • 천현권 (경상대학교 및 공학연구원) ;
  • 곽동순 (경상대학교 및 공학연구원) ;
  • 윤문수 (한국전기연구원) ;
  • 김상현 (경상대학교 및 공학연구원)
  • Published : 2005.07.07

Abstract

HTS Transformer developing is developing a power distribution and transmission class HTS transformer that is one of the 21st century superconducting frontier projects. Therefore, we prepared the model, that is Z continuous winding from Kapton insulated Cu tape for a small simulated the HTS transformer. For the development of electrical insulation design of a HTS transformer with Z continuous winding, we have been discussed insulation composition and investigated breakdown characteristics such as breakdown of liquid $N_2(LN_2)$, polymer and surface flashover on FRP and breakdown-surface combination in $LN_2$. Also we have been designed and manufactured a bobbin that has spiral slot for the Z continuous winding. The Z continuous winding mini-model from Kapton film insulated Cu tape for simulated 22.9kV class HTS transformer has been constructed using 0.1 % breakdown strength obtained by Weibull distribution. The widing model was measured their insulation characteristics such as ac (50kV, 1min) and impulse (154kV, $1.2\times50{\mu}s$ full wave, 3 times) withstand test and its excellent performance was confirmed.

Keywords