• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.263-268
• /
• 2005

Nowadays, the vessel size is tending to be bigger and bigger, so port facilities are following this trend, which has been shown inthe competition of Hub-Port among the main ports such as Port of Busan and Port of Shanghai. But there are limited numbers of large container vessels and $70\%$ of the call ships at Busan port are middle and small sized ships which are less than 20,000ton. So we need to consider the handling facilities for these sized ships, but it has disregarded. In this paper, we estimate the optimum level of crane and labor according to vessel's size by container handling cost value reflecting size of vessel; size and number of crane and labor structure.

• Journal of Korea Port Economic Association
• /
• v.37 no.2
• /
• pp.19-31
• /
• 2021

This study is aming at analysing the current trend of container shipping industry before and after COVID-19 Pandemic circumstances. Also, this study offers the political implications for 'the Korean Shipping Nation Rebuilding'. As a result of this study, the several global shipping lines have decreased their ship capacity in response to International Maritime Organization(IMO)'s environmental regulation. This finding is differ from the media reports, that is many shipping companies increased idling vessel to match the lower demand induced COVID-19 pandemic. This study also provides the two implications of the direction about Korean shipping policy. The first one is that the casual relationship of over-vessels' supply and Korea shipping policy is needed to be thoroughly analyzed. The importance of Koreans shipping industry is generally devaluated by most citizens so as to the Korean government should develop the mass media contents to enlighten the less wellknown people regarding shipping industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.9-14
• /
• 2019

Recently, container vessels are required to be applied various technologies to improve ship life-cycle and operating efficiency for the cost decreasing of logistics. The degradation of engine efficiency due to the increasing capacity of the ship and the related equipment of facilities are applied to large-scale ships without considering the condition of ship operation by increasing the ship size and feature. In this paper, the flow analysis is performed with existing gas pipe in large-scale container ship with the operation-condition of higher capacity engine and facilities, and the results were used on the new gas pipe design for ULCS (Ultra Large Container Ship). The newly designed gas pipe can be expected to increase the operating efficiency of ULCS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.27-33
• /
• 2019

Several studies have been completed on the topic of container terminals in Northern Vietnam. Few of them, however, deal with competition in terms of costs related to vessel waiting time or cargo handling. This paper estimates the average waiting cost per TEU for all the container terminals in Northern Vietnam. After average waiting time was first estimated by applying queuing theory, uncertainty theory was applied to estimated vessel daily cost. A simulation was performed to create a series of data representing waiting cost per TEU in relation to the rate of volume handled/capacity of each terminal. Non-linear regression based on this series was used to present a function for the relationship between the average waiting cost of each terminal and the rate of volume handled /capacity.

• Journal of Navigation and Port Research
• /
• v.46 no.1
• /
• pp.33-41
• /
• 2022

An important operational goal of a container terminal is to maximize the efficiency of the operation of quay cranes (QCs) that load and/or unload containers onto and from vessels. While the maximization of the efficiency of the QC operation requires minimizing the delay of yard tractors (YT) that transport containers between the storage yard and QCs, the delay is often inevitable because of traffic congestion. In this paper, we propose a method for learning a model that predicts traffic speed in a terminal using only YT operation data, even though the YT traffic is mixed with that of external trucks. Without any information on external truck traffic, we could still make a reasonable traffic forecast because the YT operation data contains information on the YT routes in the near future. The results of simulation experiments showed that the model learned by the proposed method could predict traffic speed with significant accuracy.

• Food Science and Preservation
• /
• v.12 no.3
• /
• pp.292-298
• /
• 2005

Kochujang(Korean red pepper paste) of 600 g was fermented in the different types of vessels (glass, polypropylene(PP), polyethylene terephthalate(PET), stainless steel and Korean porcelain called onggi) with 627 mL of volume during 4 months. The quality changes were monitored for physical, chemical and microbiological attributes. Onggi which had high porosity in the micro-structure provided kochujang with higher microbial counts of aerobic bacteria, lactic acid bacteria and yeasts than those of the other containers. Compared to kochujang fermented in the other containers, kochujang in Onggi showed higher protease activity, amino type nitrogen, and free amino acid content. The kochujang in Onggi also attained higher acidity, lower pH and higher reducing sugar concentration than those in the other containers. All changes were completed 2 or 3 months. Onggi showed water loss and salt increase of the kochujang comparable to those in the other vessels, which was from gradual clogging of the micropores during storage. All physical, chemical and microbiological changes made the kochujang in Onggi attain the sensory quality significantly better than those fermented in the other vessels.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.2
• /
• pp.23-36
• /
• 1989

Marine casualities in the high sea are mainly classified into the breakage of hull and capsize , of which the latter occurs frequently to a small craft and container vessels by extreme rolling. The aim of this study is to develop shiphandling techniques for the prevention of ship's large rolling by way of evaluating dangerous degree of rolling in heavy weather. In this study, rolling motion is analized by using statistical method as follow : (1) 8 sample ships is presented for calculation. (2) Analized sea state are Beaufort scale 7 and 10 (wind velocity 30kts and 50kts respectively) and significant wave height is put as 5.2m and 11.2m. (3) The formula recommended by International Towing Tank Conference (ITTC) is used to calculated the wave spectrum. The results of this study are as follow : The results of this study are as follow : (1) Most of the vessels with beam of 20 meters or less was found to be capized in the waves abeam under the sea condition of Bearfort scale7(30kts). (2) For the vessels range 20m to 30m was found safe under the sea conditions of Bearfort scale 7(30kts) and imminent danger under the sea condition of Beaufort scale 11(50kts). (3) It is proved that any vessel could be capsized by heavy rolling regardless of vessel's size whenever the motion is synchronized with waves abeam. This study concludes that the navigator, especially at night , must anticipate the exact wave direction, referring to the wether report and coastaline, not to lay the vessel in the serial wave abeam.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.83-96
• /
• 1986

In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.71-96
• /
• 2008

The purpose of this study is to suggest the new strategies for West coast ports, especially Mokpo Port development. This paper also analyzes the recently evolving change of shipping environment such as upsizing of vessels, horizontal and vertical integration strategies in the liner shipping industries through the mergers and acquisitions or strategic alliances, establishment of dedicated terminal and surging bunker charge. With shipping environment is rapidly changing, we examine how to cope with the current situation and suggest the solutions how to tackle shippers' and shipping companies' request. As a result of an empirical study, we found out that Mokpo Port suffers from the shortage of container cargo, container imbalance, insufficient forwarders and inland trucking service providers and hinterland transportation network system. With these obstacles settled, the number of container cargo can be induced to Mokpo Port and the regular container services between Mokpo and Chinese ports and Japanese ports loops were found to be competitive.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.437-445
• /
• 2018

IMO (International Maritime Organization) has been strengthening the regulations of ship emission gas such as sulfur oxides (SOX), nitrogen oxides (NOX) and carbon dioxides (CO2) to protect the marine environment. Especially, ECA (Emission Control Area) has been set and operated in the USA and US. As a countermeasure against these environmental regulations, the demand for environmentally, friendly and highly efficient vessels has led to a growing interest in technology related research with respect to electric propulsion systems capable of reducing exhaust gas. Container ships were excluded from the application coverage of the electric propulsion systems for reasons of operation at economical speed. However, in the future, the need for electric propulsion system is expected to rise, because it is easy to monitor and control so that it can be an applicate to smart ship which are represented by fourth industrial revolution technology. In this study, research was carried out to design a generator and battery capacity through the load analysis of the 6,800TEU container ship to apply the electric propulsion system of the container ship. A capacity design based on the load analysis has an advantage that the generator can be operated in a high efficiency section through the load distribution control using the battery.