• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.1008-1012
• /
• 2012

Injection molds are fabricated by assembling a number of plates in which mold core and cavity components are inserted. The assembled structure causes a number of contact interfaces between each component where the heat transfer is affected by the thermal contact resistance. However, the mold assembly has been treated as a one body in numerical analyses of injection molding, which has a limitation in predicting the mold temperature distribution during the molding cycle. In this study, a numerical approach that considers the thermal contact effect is proposed to predict the heat transfer characteristics of an injection mold assembly. To find the thermal contact conductance between the mold core and plate, a number of finite element (FE) simulations were performed with the design of experiment (DOE) and statistical analysis. Thus, the heat transfer analyses using the obtained conductance values can provide more reliable results than conventional one-body simulations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.356-362
• /
• 2004

Using multi wrapped copper by polyimide film for HTS transformer, the breakdown and V-t characteristics of two type models for turn-to-turn, one is point contact model, the other is surface contact model, were investigated under ac and impulse voltage at 77 K. A material that is Polyimide film (Kapton) 0.025 mm thickness is used for multi wrapping of the electrode. Statistical analysis of the results using Weibull distribution to examine the wrapping number effects on V-t characteristics under at voltage as well as breakdown voltage under ac and impulse voltage in $LN_2$ was carried. Also, survival analysis was performed according to the Kaplan-Meier method. The breakdown voltages for surface contact model are lower than that of the point contact model, because the contact area of surface contact model is wider than that of point contact model. At the same time, the shape parameter of the point contact model is a little bit larger than the of the surface contact model. The time to breakdown tn is decreased as the applied voltage is increased, and the lifetime indices slightly are increased as the number of layers is increased. According to the increasing applied voltage and decreasing wrapping number, the survival probability is increased.

• Journal of Information Processing Systems
• /
• 제18권3호
• /
• pp.359-373
• /
• 2022

The new crown pneumonia (COVID-19) has become a global epidemic. The disease has spread to most countries and poses a challenge to the healthcare system. Contact tracing technology is an effective way for public health to deal with diseases. Many experts have studied traditional contact tracing and developed digital contact tracking. In order to better understand the field of contact tracking, it is necessary to analyze the development of contact tracking in the field of computer science by bibliometrics. The purpose of this research is to use literature statistics and topic analysis to characterize the research literature of contact tracking in the field of computer science, to gain an in-depth understanding of the literature development status of contact tracking and the trend of hot topics over the past decade. In order to achieve the aforementioned goals, we conducted a bibliometric study in this paper. The study uses data collected from the Scopus database. Which contains more than 10,000 articles, including more than 2,000 in the field of computer science. For popular trends, we use VOSviewer for visual analysis. The number of contact tracking documents published annually in the computer field is increasing. At present, there are 200 to 300 papers published in the field of computer science each year, and the number of uncited papers is relatively small. Through the visual analysis of the paper, we found that the hot topic of contact tracking has changed from the past "mathematical model," "biological model," and "algorithm" to the current "digital contact tracking," "privacy," and "mobile application" and other topics. Contact tracking is currently a hot research topic. By selecting the most cited papers, we can display high-quality literature in contact tracking and characterize the development trend of the entire field through topic analysis. This is useful for students and researchers new to field of contact tracking ai well as for presenting our results to other subjects. Especially when comprehensive research cannot be conducted due to time constraints or lack of precise research questions, our research analysis can provide value for it.

• EDISON SW 활용 경진대회 논문집
• /
• 제3회(2014년)
• /
• pp.409-411
• /
• 2014

Based on the first-principles computations, the nature of the microscopic geometry of the molecule-electrode contacts was addressed. The single-molecule junction was prepared by connecting hexanediothiolate (HDT) to Au(111) electrodes via one, two, and three Au adatoms having coordination number of one (CN1), two (CN2), and, three (CN3), respectively. The contact atomic structure and energy of the stretched Au-HDT-Au junction was observed. The analysis revealed that the contact geometry with lowest coordination number (CN1) is energetically more stable than CN2 and CN3.

• Tribology and Lubricants
• /
• 제36권5호
• /
• pp.262-266
• /
• 2020

Herein, we present a numerical investigation of wear analysis of sliding systems with a constant speed subjected to Archard's wear law. For this investigation, we compared two methods: eigen-wear analysis and adaptive meshing technique. The eigen-wear analysis is advantageous to predict the evolution of contact pressure due to wear using the initial contact pressure and contact stiffness. The adaptive meshing technique in finite element analysis is employed to obtain transient wear behavior, which needs significant computational resources. From the eigen-wear analysis, we can determine the appropriate element size required for finite element analysis and the time increment required for wear evolution by a dimensionless variable above a certain value. Since the prediction of wear depends on the maximum contact pressure, the finite element model should have a reasonable representation of the maximum contact pressure. The maximum contact pressure and wear amount according to this dimensionless variable shows that the number of fine meshes in the contact area contributes more to the accuracy of the wear analysis, and the time increment is less sensitive when the number of contact nodes is significantly larger. The results derived from a two-dimensional wear model can be applied to a three-dimensional wear model.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.450-458
• /
• 2000

This study deals with the unsteady close-contact melting of solid blocks on a flat surface subject to convective heating. Normalizing the model equations in reference to the steady solution successfully leads them to cover constant heat flux and isothermal limits at small and large extremes of the Biot number, respectively. The resulting equations admit a compactly expressed analytical solution, which includes the previous solutions as a subset. Based on the steady solution, the characteristics of close-contact melting can be categorized into constant heat flux, transition, and isothermal regimes, the boundaries of which appear to be nearly independent of the contact force. The unsteady solutions corresponding to Biot numbers in the transition regime show intermediate behaviors between those of the two limits. With a proper approximation, the present solution procedure can cope with the case of variable fluid temperature and heat transfer coefficient. Regardless of imposed conditions, the mean normalized Nusselt number during the unsteady process asymptotically approaches to a constant value as the Biot number comes close to each limit.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2967-2972
• /
• 1994

The multiple character of the contact interaction and the collective behavior of elementary microcontacts play a significant role in all the processes occurring in the surface layers, including the failure due to friction and wear. The array of metal spheres compressed between flat plates has been used for simulation of the contact behavior of multiple contact of solids under normal loading. An experimental design has been made providing regular array of the spheres at the same size with different spatial order. Measurement of electrial contact resistance has been made using the equipment providing the adequate accuracy in the range of micro Ohms. The data on electrical contact resistance have been compared with theoretical predictions using the multiple contact model of constriction resistance. The effect of single spots number and array on conductivity of contact has been evaluated.

• 대한치과교정학회지
• /
• 제25권3호
• /
• pp.323-331
• /
• 1995

본 연구는 교정치료가 끝난 26명의 환자에서 T-scan을 이용하여 교정치료직후와 3개월후에 교합접촉의 변화를 구하여 시간의 경과에 따른 총접촉수의 변화와 전치부접촉수의 변화, 구치부 접촉수의 변화 및 총접촉되는 치아수와 전치부와 구치부의 접촉되는 치아수의 변화를 비교분석한 바 다음의 결론을 얻었다. 1. 평균적인 총접촉수의 변화는 교정치료 종료시 11.27개에서 3개월후 13.15개로 증가하였는데, 통계학적으로 유의한 차이를 보였다(P<0.05). 2. 전치부 접촉수에 있어서는 변화가 없었다. 3. 구치부 접촉수의 변화는 통계학적 유의성이 있었다(P<0.01).총접촉수의 변화는 구치부 접촉수의 변화에 기인하였다. 4. 총접촉치아수에 있어 변화는 통계학적 유의성이 있었다(P<0.05). 5. 전치부의 접촉치아수는 약간 증가하기는 하였으나, 유의한 차이를 보이지 않았다(P>0.05). 6. 구칙부 접촉치아수의 변화는 통계학적으로 유의성을 보였다(P<0.05). 7. 초기 치아접촉수와 시간의 경과에 따른 접촉수의 변화량은 약한 역상관관계를 보였는데, 이는 초기 접촉수가 적을 수록 보다 많은 접촉수의 증가가 있었다는 것을 보인다(r=-0.38, p<0.05).

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.115-120
• /
• 2006

On a rotating contact surface of arbitrary shape, the relative velocity of the contact point sliding between the surfaces is computed with the basic geometries of the rotating surfaces, and the acceleration of the contact point between the contact surfaces is computed by using the relative velocity of the contact point. Thus the equation for the acceleration constraint between the contact surfaces in muitibody dynamics is not coupled with the parameters such as the relative velocity of the contact point. In case of the kinematic analysis, the acceleration of the contact point on any specific instant may also be efficiently computed by the present technique because the whole displacement of a full cycle need not be interpolated. Employing a cam-follower mechanism as a verification model, the acceleration of the contact point computed by the present technique is compared with that computed by differentiating the displacement interpolated with a large number of nodal points.

• 기본간호학회지
• /
• 제18권2호
• /
• pp.195-200
• /
• 2011

Purpose: The purpose of this study was to assess rates for handwashing adherence before and after nursing contact in intensive care units (ICU). Methods: The participants included 90 nurses working in intensive care units of an 800-bed university-affiliated hospital in Gyeonggi Province and 2000-bed university-affiliated hospital in Seoul. Time for handwashing was calculated using the average number of handwashings during an 8-hour day shift. Nursing contact was based on indications as defined by the Centers for Disease Control and Prevention (CDC, 2002). Data were analyzed using frequency, percent, t-test and ${\chi}^2$-test. Results: During an 8-hour day shift, the average number of times that hands were washed was 25.0. The rates were significantly lower before the nursing contact than after the nursing contact when it involved sectioning, observation or contact with a wound, cleaning enteric feeding bag, physical exam, use of gloves, or contact with contaminants. Conclusions: The results indicate that as handwashing rates were significantly lower before nursing contacts than after nursing contacts, there is need to develop strategies to address this deficiency in handwashing.