• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.43-55
• /
• 2009

In terms of deregulation requests from business, incidents at construction sites are rapidly increasing after reducing the regular safety training hours. Especially, to prevent incidents through safety trainings for construction site workers, who have lots of hazardous tasks than general manufacturing, is not only to protect property of both the companies and the country but also to increase their profits. That is why there are loud voices regarding that the safety training is a core mandatory to prevent industrial incidents. But, most companies, as soon as the deregulation for safety training is implemented, mitigated conducting safety trainings to prevent incidents. With this, the incidents are currently to be increased and caught in a vicious circle of many incidents at the smaller companies because of their absentmindedness regarding safety training due to their poorness as subcontractors of major companies, comparing to major companies. This study explains that the difference between managers and workers are existing about safety awareness and knowledge. And, we confirmed that the educational factor led by deficiency of safety awareness and knowledge was the major factor.

• Journal of the Korean Society of Safety
• /
• v.21 no.5 s.77
• /
• pp.53-59
• /
• 2006

Standard safety management costs can not be applied to each site with same rate, it is very difficult, because it depends on the experience, work method, work kind, work progress schedule, and hazard level of each construction company. Therefore, this study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. The domestic system of standard safety management costs is not considered in the foreign country, while only related subjective items have been investigated and evaluated for this study. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office, civil work such as bridge, tunnel, dam, plant etc, secondly. Additionally, three items of gymnasium, railway, particular steel tower are investigated in this study. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basial data and material to be systemized.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.67-73
• /
• 2016

According to industrial accident analysis of the Ministry of Employment and Labor in 2013, 38 workers were injured by fall accidents on average per day, and one worker died on average per day among them. In various industries such as heavy and construction industry, the full body harness is commonly used to prevent the fall accident. In developing full body harness, the designer considered only the workers' safety, without taking into account comfort and workability. The survey was conducted so as to search the problems of full body harness currently used by workers in heavy and construction industry. The survey questionnaire was given to 565 workers wearing full body harness in heavy and construction industry. The results of study showed that the development of new full body harness considering body size of korean was needed. The impotent factors for developing of new full body harness were the size and the weight of the full body harness. The full body harness taking into account body size was judged to contribute to more comfortable work, work efficiency and safety. The result of this study can be utilized as useful data in the development of new full body harness considering the body size of korean workers.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.107-112
• /
• 2005

The purpose of this study is to propose and introduce Accidents Prevention Remedies(APRs) and their priorities especially for Accident Causing factors(ACFs) drawn by surveying and analyzing how much foreign workers in Korea have been exposed to dangers at a construction site. At frist as a result of the analysis of the questionnaire which 59 foreign industrial trainees working at the construction sites in Seoul-Kyunggi area had responsed, 12 ACFs and 11 APRs were put out by using the SPSS programme. Then, through the Analytic Hierarchy Process(AHP) about the questionnaire from 96 safety and civil engineers who have experienced in managing foreign labor at the construction sites all over the country, the APRs given their priorities of relative importances are as follows; First, it is absolutely necessary that every working order to foreign workers should be made more definitely in accordance with a concrete process schedule. Second, the owners should increase investments in improving foreign workers' welfare in order to minimize their potential human error. Third, Korean language education programme for simple technical terms should be made and executed at least.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.714-717
• /
• 2007

This paper presents the findings that may be useful for establishing safety policies involved with safety plan, program, and control relative to fatal accidents in construction job site. The fatal accident investigation database maintained by Korean Production Household Mascot Safety Industrial Complex is accessed. The 5 years fatal accidents occurred in 2002 to 2006 were analyzed. The statistic relative to the fatal accidents in different project types is obtained using different classifications such as occupation, years of experience, accident type, and time in a day. This research would contribute to ensure the effectiveness of safety policy so as to enhance worker safety.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.95-102
• /
• 2019

The purpose of this study is to investigate the correlation between aluminum form work and noise-induced deafness by conducting special health examination on construction aluminum worker and noise measurement at the workplace. All the 11 aluminum form workers were diagnosed with noise-induced deafness after holding a special health examination. The workers have not had any previous history of noise-induced deafness which indicates that aluminum form work is related to noise-induced deafness disease. The impact noise of 120 dB(A)~125 dB(A), which exceeds the regulations of industrial safety and health act, was found during the dismantling rather than installation when noise measurement was made at the aluminum workplace. The aluminum form workers could permanently lose the hearing sense if they are exposed to this impact noise. This study is to suggest the method to prevent noise-induced deafness for aluminum form workers by firstly giving out hearing protection equipment at the construction site and secondly installing rubber mat, soundproof panel as well as changing the noise-lowering technique.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1138-1145
• /
• 2022

While pursuing digitalization and paperless projects, the construction industry needs to settle on how to make the most of digitized data and information. On-site workers, who currently rely on paper documents to check and review design and construction plans, will need alternative ways to efficiently access the information without using any paper. Augmented Reality is a potential solution where the information customized to a user is aligned with the physical world. This paper proposes the Augmented Reality framework to deliver the information on on-site resources (e.g., workers and equipment) using head-mounted devices. The proposed framework was developed by interoperating Augmented Reality-supported devices and a digital twin platform in which all information related to ongoing tasks is accumulated in real-time. On-site resources appearing in the user's field of view are automatically detected by an object detection algorithm and then assigned to the corresponding information by matching the data in the digital twin platform. Preliminary experiments show the feasibility of the proposed framework. Worker detection results can be visualized on HoloLens 2 in near real-time, and the matching process obtained the accuracy greater than 88%.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.316-322
• /
• 2002

In case of reducing working time, it is difficult that the construction industry is analyzed far-reaching effects caused by a reduction of working time, by approaching with just the total amount of work. Because it has the properties such as the singularity, the outdoor using, a sense of the season unlike other industries. In order to analyze the effect of a reduction of working time on the construction industry, the example of a reduction of working time in domestic other industries related with it was analyzed intensively first. And an example in Japan, which is similar to our existing related laws and industrial structure among foreign construction industries was analyzed, and a relation with the domestic construction industries and an issue were drown a conclusion. This was applied to a field worker and a related main group participating in a real production. And it showed the prediction model for a working pattern and a dealing plan to prepare in a construction site by predicting a working pattern in the management side of a construction site annually.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.6
• /
• pp.619-626
• /
• 2013

Many pictures are taken at a construction site, but the information of the pictures is not managed in an efficient and systematic manner. For this reason, when a construction worker has scant field experience or knowledge, it is hard to communicate with others efficiently. Therefore, the information of the pictures taken is not fully utilized in any deliberation or conflict among interested parties, facilities maintenance, and construction of another structure, although they were taken for those purposes. This study discusses the need for combining vector-photos with image and 5W and 1H information, and develops a prototype module for creating vector-photos and saving them in a server. The vector-photos taken can be saved to a server in real time, and efficiently managed by a DB system. If a system to link the vector-photos with a BIM model is developed in the future, it is expected that the vector information in the picture can be connected with the property information of an object. As a result, the vector-photos can be utilized in more diverse ways.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1113-1116
• /
• 2009

The attempt to use a 3D model each field such as design, structure, construction, facilities, and estimation in the construction project has recently increased more and more while BIM (Building Information Modeling) that manages the process of generating and managing building data has risen during life cycle of a construction project. While the 2D Drawing based work of each field is achieved in the already existing construction project, the BIM based construction project aims at accomplishing 3D model based work of each field efficiently. Accordingly, the solution that fits 3D model based work of each field and supports plans in order to efficiently accomplish the relevant work is demanded. The estimation, one of the fields of the construction project, has applied BIM to calculate quantity and cost of the building materials used to construction works after taking off building quantity information from the 3D model by a item for a Quantity Take-off grouping the materials relevant to a 3D object. A 3D based estimation program has been commonly used in abroad advanced countries using BIM. The program can only calculate quantity related to one 3D object. In other words, it doesn't support the take-off process considering quantity of a contiguous object. In case of temporary materials used in the frame construction, there are instances where quantity is different by the contiguous object. For example, the formwork of the temporary materials quantity is changed by dimensions of the contiguous object because formwork of temporary materials goes through the quantity take-off process that deduces quantity of the connected object when different objects are connected. A worker can compulsorily adjust quantity so as to recognize the different object connected to the contiguous object and deduces quantity, but it mainly causes the confusion of work because it must complexly consider quantity of other materials related to the object besides. Therefore, this study is to propose the solution that automates the formwork 3D modeling to efficiently accomplish the quantity take-off of formwork by preventing the confusion of the work which is caused by the quantity deduction process between the contiguous object and the connected object.