• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.2
• /
• pp.101-104
• /
• 2013

The actual aircraft flight training can be done, but falls pilots primary flight training skills to the many risks and costs are formidable. It also requires considerable skill to follow at a higher risk of flight training is the same. These things through software simulation training can reduce the risk and cost of the expected risk situations such as virtual reality development and has the advantage that you can try. In this paper, the characteristics and actual aircraft flight dynamics of the considered armed ballistics software platform for game development by designing a student wants to become a pilot in the aircraft is to help you understand.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.84-88
• /
• 2012

A numerical skill for effective treatment of inclined boundaries in a finite element method is introduced. A finite element method has been frequently used to simulate hydraulic phenomena in a coastal zone since it can be applied to irregular and complex geometry. In case elliptic partial equations are governing equations for a finite element model, however, there is a difficulty in treating boundary conditions properly for cases in which boundaries are vertically inclined. In this study, a method to treat such inclined boundaries using Bessel functions for a finite element method is introduced and compared with analytical solutions.

• Korean Medical Education Review
• /
• v.15 no.3
• /
• pp.125-135
• /
• 2013

Since the establishment of the national medical licensing examination board in 1992, the medical licensing examination system has changed enormously and this has had a number of impacts on examination services. All those reforms were aimed at improving the relevance and reliability of the test. Several attempts of the testing system have appeared in the new examination service, and which have also brought about the changes in the medical school curriculum such as introducing integrated courses instead of traditional subjects, using test scores as a reference to the post-graduation selection test. Some examples of changes in the examination system are as follows: 1) choosing three integrated test subjects and outlines of their reference content instead of 15 academic subjects, 2) adjusting the ratio of multiple choice question items to focus more on the problem solving level, 3) introduction of 'one-best answer' single set and 'extended matching type items, 4) item construction based on real clinical cases and real clinical materials. Recently, a clinical skill test system has been introduced to measure examinees' basic clinical skills competencies. Despite continuing efforts, the examination system still has many issues remaining to be solved. These problems include the differential weighting of test items, appropriate threshold for passing, and practicality of pre-testing to stabilize the passing rate and avoid the hazards of newness and undesirably difficult test items.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1608-1610
• /
• 1998

An oil-filled paper-insulated power cable and a XLPE-insulated power cable have been mainly applied as an extra-high-voltage underground power cable. But in recent the XLPE cable has been applied more widely than the OF cable, because of its advantages, such as the low-cost and simple installation. In general two types, molded and prefabricated, of straight joints are applied for the XLPE cables. For a tape-molded joint, one of molded joints, its electrical properties are excellent, but it has some disadvantages, such as a long working time. high skill of workers and the high cost of jointing equipments. For a prefabricated joint, developed and applied in Europe and Japan, its working time is short, its jointing procedures are simple, and its quality control is easy, but its prices are very high. In Korea the development of a compression-type PJ will be finished in the near future, and studies of its jointing techniques and equipments is actively going on. This paper describes the design and construction of the PJ, the jointing procedures and techniques for the PJ, and its future trends.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.169-172
• /
• 2008

Recently, landscape lighting is more and more installing in many places such as park, cultural heritages, large-scale structures, bridges, apartment, and so on. However, there is no the government-set official estimation for standard wages constructing luminaries for landscape lighting. The cost of construction is estimated based on the standard wages of related-similar installations such as internal lighting fixtures or the designer's subjective decision. Sometimes, it is overestimated or underestimated. In this paper, the fundamental process for estimating the standard wages constructing luminaries for landscape lighting is studied. The estimation method of standard wages constructing lighting fixtures was examined on the basis of the type and capacities of luminaries, installation places, type and shapes of installation auxiliary materials, worker's skill, and etc. As a result, some results obtained in this work were significantly, different with the standard wages for internal electric wiring published by Korea Electric Association. In the future, to improve the accuracy of the estimation of the standard wages for constructing luminaries for landscope lighting, detailed factors related to the installation condition and dimensions and types of luminaries should be considered.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.61-66
• /
• 2015

Recently, the major trends of NIL are high throughput and large area patterning. For UV NIL, if it can be proceeded in the non-vacuum environment, which greatly simplifies tool construction and greatly shorten process times. However, one key issue in non-vacuum environment is air bubble formation problem. In this paper, numerical analysis of bubble defect of UV NIL is performed. Fluent, flow analysis focused program was utilized and VOF (Volume of Fluid) skill was applied. For various resist-substrate and resist-mold angles, effects of velocity inlet and residual layer thickness of resist on bubble defect formation were investigated. The numerical analyses show that the increases of velocity inlet and residual layer thickness can cause the bubble defect formation, however the decreases of velocity inlet and residual layer thickness take no difference in the bubble defect formation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8B
• /
• pp.1217-1223
• /
• 2010

Recently a technology paradigm of ship has been changed to digital ship, IT shipbuilding convergenced technology development and Human training is very important, that is important role of making high valued shipbuilding industrial development. In this paper, we introduce IT shipbuilding convergenced education program for training human of special skill. A course of study is made of analyzing a survey of IT shipbuilding convergenced core technology in shipbuilding industry. we surveyed marine wireless communication technology, S/W solution for vessel, and CAN & SAN technology in IT filed, and ship-building design and vessel construction technology in shipbuilding field. we put in industry specialist in our education program because we have a gole of training the person are adapted immediately in shipbuilding industry.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.611-613
• /
• 2008

This paper describes the system that enables users to control the home electronic equipment using mobile phone. The home network industry is setting in network period that grow rapidly and get many interests. And, it is real condition that hailing of existed system is rising too. This paper developed system to make use of mobile phone regarding this and control boiler temperature in home to remote. This paper that serve this used skill of mobile programming, mobile Brew, RF radio communication, etc. for communication with server in an experiment. This paper presented another method that use RF radio communication and mobile device in home automation construction. The result of this paper will be expected to be able to contribute little in development of home network industry.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.135-144
• /
• 2010

This study was performed to suggest a soil loss reduction skill through estimating soil erosion from a small watershed including each type of sloping agriland by using GEOWEPP model. Experimental watershed at Gangwon province was selected for very typical sloping fields of highland agriculture in Alpine area. Runoff discharge and sediment load, hourly rainfall amount occurred during storm event were gauged, and weather data were obtained from Daegwallyeong meteorological station. The results of GEOWEPP model estimation showed that relative error values for total runoff discharge and sediment load were 3 %, -14.5 % respectively. Based on the result, soil erosion and waterway path map for each hillslope were made to select target hillslope. Several hillslopes of severe soil erosion were analyezed and then the optimal vegetative filter strip construction width and waterway path to plant grass were decided by using GEOWEPP Model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.177-181
• /
• 2004

It is as research about embodiment of MAC algorithm that is point of wireless LAN technology that is radio skill that is receiving present head of a family footlights, and embodied MAC that is algorithm that control modem Rf and host interface to level that existent common use radio AP and send-receive of high speed are available that embody function that is presented to IEEE 802.11 specs using H/W and S/W. When embody actually, tested module that embody actually using module modem and RF part because test is impossible after have common use product. Also, module that embody actually designed, and is expected to be utilized in radio LAN system construction of high speed late considering CRC and FCS ewer on channel.