• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.210-218
• /
• 1998

The ATO(Automatic Train Operation) System is used for train operation instead of drivers. It is interfaced with TCMS(Train Control and Monitoring System) and ATC/TWC system in the train and wayside facilities. In this paper describes configuration of ATO, specification of ATO hardware, construction of ATO software and the algorithm fur automatic train speed regulation in the carborn ATO system. ATO Application Software is consist of ART, SPR, REG, SRV and PSM tasks. ART task is main control part of the ATO that determine ATO control, ATO mode, state transition. SPR determine speed reference according to train motion status, track data, train data and restricted train speed. REG task regulated train speed form the starting of one station to the precision stop at the other station under the result of ART and SPR tasks. In this paper, a algorithm for the train speed regulation while running is described.

• 한국지열·수열에너지학회논문집
• /
• 제17권3호
• /
• pp.21-29
• /
• 2021

In this study, the current regulation of the water source energy, one of the renewable energy, was analyzed, and the improvement plan for the high efficient data center cooling system was suggested. In the improvement plan, the design and construction guidelines of the water source energy system permit to adopt the cooling and heating system with or without heat pump. In addition, it should also include the system operated in the cooling mode only all year-round. The domestic test standards to consider the water source operating conditions should be developed. Especially, it is highly recommended that the test standards to include the system with forced cooling and free cooling modes related with the enhanced data center cooling system adopting the water source energy.

• 환경영향평가
• /
• 제18권1호
• /
• pp.21-30
• /
• 2009

The study show that things about the noise control are indicated at The Noise & Vibration Control Act and the other Act. Also, the details program and total government ministries' program for the noise control are indicated what are the advance noise control plan. The study consist of the four part which are "Draw up the environmental noise infrastructure plan; the install shall be done the noisemap & the automatic noise measurement devices", "Resetting of environmental noise standard at the application area and Introduce of indoor noise; the guide for region classification of the noise standard & indoor noise", "Setting of aircraft noise standard and Program of measurement point operation; the noise-assessment-standard shall change from WECPN to new index($L_{den}$, $L_{dn}$, $L_{Aeq\;24h}$) & the operation and control of aircraft noise measurement changes from local environmental office to central control center" and "The method of noise regulation at construction site and the plan on making of standard for vibration regulation; It shall be made that the guideline of construction noise should include a target-construction, noise standard etc & the ministries shall unify control about construction vibration of the blasting vibration". The advance noise-policy will improve efficiency to deal with civil appeal & damage on residents about noise.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.550-557
• /
• 2005

Because each building is built in different time, there exists different equipment to meet the need for each age. Before the announcement of "Community Management Regulation", the old communities usually suffer the problem of lower requirement and living quality. This may bring some security problem that we should face. In this research, we construct "Building Administration System" to provide users a tool to perform a standard operation procedure in community management. This powerful tool will also help manager to effectively handle important tasks in property administrating by reducing unnecessary documentation. In the current regulation, all community committee members shall be voted each year. This will seriously affect the cumulative of management knowledge and cause a worse efficiency. In this research, we use Object Oriented concept and Visual Modeling techniques to combine with Interbase, ER/Studio, and Delphi to develop this management system for Building Property. Through the help of current computing technology, we can solve the problem that can not be inherited and the storing of the huge amount of data. In this system, we develop the modules such as Basic Data Module, Administrative Expense Calculation, Receipt Print, and Inquiring for Inheritance. In this system, we have integrated all houses, parking lots, and public equipments in it. Manager will only need to handle some basic accounting data; the system will automatically handle the rest. Through the help of this system, the community management staff can be easily accomplished and put more manpower on some needed aspect to improve the living quality.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.26-27
• /
• 2014

Sustainable development has become a growing concern throughout the world. Construction industry also has participated in the efforts to minimize the environmental impacts. In Korea, the government has already established the green construction certification(G-seed) and guidelines for sustainable construction. However, domestic guidelines are focused on the design and construction phase, not on the construction project. In addition, it is difficult to find instructions due to the complex structure based on the work unit. Therefore this study aims to deduct the component structure for sustainable construction guidelines in the planning, design and construction phases by utilizing the Factor Analysis. Following the literature review, a total of 26 criteria were identified. Further, a survey was conducted to capture the perceptions on the importance of the criteria. According to the factor analysis, the criteria can be grouped into 8 factors : Environmental factors management, Management planning, Cost and Design management, Energy management, Material management, Certification and regulation management, General Management and Others.

• 한국조리학회지
• /
• 제23권6호
• /
• pp.143-152
• /
• 2017

This paper examined seemingly well-working compromises in identity construction, questioning whether the compromises could function only nominally in practice. The literature has paid attention to the conflicts which end up functionally sense-making, through either unilaterally enforced or mutually assimilated compromises. In contrast, this paper's analysis of Super Tuscan wines under the Italian government's quality regulation illustrated that the compromises between wineries and classification systems do not work well and make the classification systems meaningless in the end. This study thus argued that compromises in identity construction do not always result in functionally sense-making outcomes: they could be only nominal. This study suggested that idiosyncratic institutional contexts, such as weak organizational legacy, affect the results of identity construction in functional terms. At last, the theoretical and practical implications both in organization and management of this study were well discussed.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.69-75
• /
• 2002

Current fire safety in the construction sites has developed piecemeal over a considerable period of time. However, the law and regulation of fire safety is insufficient to protect fro in the construction sites. The frequency of fire in the construction sites is very rare but it brings longterm deterioration durability of building structure and large scale industrial calamity. There are many process of works and each work deals with many kind of flammable material, so it is very difficult to find a proper safety fire prevention. This study executed the questionnaire and fire experiment of the welding work to provide effective fire prevention counterplan.

• 한국건축시공학회지
• /
• 제4권2호
• /
• pp.137-142
• /
• 2004

There was the time of IMF(1998) that management condition of construction business had been the worst. After that time, structural regulation was completed and financial structure was returned to normalcy(2001). At that time, the aim of this paper is that fifteen construction business are researched for process of management condition and capital structure after they is selected as samples for three years, also failure of two-groups is predicted as statistics analysis and multiple discriminant analysis for them. In this paper, It is researched financial statement of business by the forecast experiment of failure and analyzed statistically possibility of failure and success for financial ratio. For them, the fifteen companies of failure and the fifteen companies what were not the failure, for listed company, and the fourteen variables are selected and they are analyzed statistically according to Logit Analysis.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.25-44
• /
• 2005

Safety management cost, $US\$$ one thousand billion has been input to the construction area from 1995 to 2000 but the management quality is still in the developing country level. The above mentioned increase of accident rate are attributed to the generous code regulation, net fit to the sense, varying with time change, but the more fundamental reason of this is no practical construction safety management system, up to now. Hardware-orienting operation for the system could be a main reason of this problem. In this paper, we developed a model for efficient construction safety system. It was found from the case study that the A Study on Introduction Application of Occupational Health & Safety Management System for Construction Industry.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.34-42
• /
• 2011

Death disaster among the disasters in construction field is mainly occurred by crash, and the work plate is the main objects causing crash. This study was performed by interview with workers in construction field to evaluate the consciousness on safety and to analyze the type of use and the state. Finally the problems while using work plate were appeared with its requirements for the improved use. Based on the results from this study, amendments were proposed for some parts of regulation related, and further four types of development on the safe work plate were presented. It is expected that the safer construction environment could be composed by using the results.