• 한국항공우주학회지
• /
• 제43권2호
• /
• pp.149-155
• /
• 2015

기존의 MEMS 기반 루버 및 셔터 개폐형 가변 방사율 라디에이터는 온도 조건에 따라 방사율이 가변되어 효율적인 열 제어가 가능하나 발사 환경에서의 기계적 구동부의 취약점과 변경된 방사율 유지를 위해 지속적인 전력 소모가 요구되는 단점을 갖는다. 본 연구에서 제안한 MEMS 기반 가변 방사율 라디에이터는 대전되는 비드를 사용하여 전극의 극성 변화에 따라 방사율 가변이 가능하기 때문에 상기의 문제점을 극복할 수 있다. 본 연구에서는 MEMS 기반 가변 방사율 라디에이터의 광학 물성치 최적화 설계를 수행하였으며, 고정 방사율 라디에이터와의 비교를 통해 MEMS 기반 가변 방사율 라디에이터의 유효성을 입증하였다.

• 한국축산식품학회지
• /
• 제36권1호
• /
• pp.51-60
• /
• 2016

This study was performed to evaluate the antioxidant activity of oven-dried tomato powder (OTP) as affected by drying temperature and the effect of OTP on the product quality of pork patties. Three OTP products were obtained by drying of fresh tomato at 60, 80 and 100℃ oven until constant weight was obtained. Total phenolic content of three kinds of OTPs ranged from 1.95 to 5.94 g/100 g. The highest amount of total phenolic compound was observed in OTP dried at 100℃. Antioxidant activity of three kinds of OTPs was measured by 1,1-diphenyl-2-pycrylhydrazyl (DPPH)-radical scavenging activity, iron chelating ability, reducing power and measurement of lipid peroxide in linoleic acid emulsion system. In all parameters, OTP at 100℃ showed the higher antioxidant activity than other temperatures (p<0.05). Based on the model study, the physicochemical properties, and antioxidant and antimicrobial activities of pork patties containing 1% OTP were measured. Redness of pork patties were increased with the addition of OTPs (p<0.05). Thiobarbituric acid reactive substances (TBARS) values of raw pork patties containing OTPs were lower than those of control (CTL) until 7 d of storage, regardless of drying temperatures (p<0.05). Peroxide values of pork patties made with OTP (1%) were lower than those of CTL until the end of storage time (p<0.05). However, no antimicrobial activities were observed among the treatments (p>0.05). Therefore, OTPs could be used as a natural antioxidant in meat products.

• 전기화학회지
• /
• 제13권3호
• /
• pp.193-197
• /
• 2010

In terms of the system efficiency, it is very useful to apply the ejector into the fuel recirculation system of a fuel cell system since the ejector needs no parasitic power to operate. Since the conventional automotive fuel cell use hydrogen and air as their fuel, the only hydrogen is needed to be recirculated for the better fuel efficiency. On the other hand, the submarine fuel cell needs both hydrogen and oxygen recirculation systems because the submarine drives under the sea. In particular, the cathodic recirculation has to meet the tougher target since the oxygen based pressurized stack generally used in the submarine applications generates the significant amount of the water in the stack during the operation. Namely, the oxygen utilization has designed less than 50% in the whole operating range for the better exhausting of the generated waters. And thereby in terms of the oxygen utilization, the entrainment ratio of the ejector should be more than 1 within the whole operating range. However, the conventional ejector using a constant nozzle can not afford to satisfy the mentioned critical requirement. To overcome the problem, the dual-ejector and its control strategy are designed. The performance of the proposed dual-ejector is verified by the experiments based on the real operating conditions of the target submarine system. Furthermore, the proposed design method can be used for the other fuel recirculation system of a large-scale fuel cell system with the critical requirement of the fuel utilization.

• 한국지능시스템학회논문지
• /
• 제24권1호
• /
• pp.96-101
• /
• 2014

풍력은 전 세계적으로 가장 각광을 받고 있는 신재생 에너지이며 당분간 이러한 추세는 계속될 것으로 기대되고 있다. 최근 풍력발전시스템의 O&M(Operation & Maintenance) 비용의 절감에 대한 필요성이 꾸준히 대두되고 있는 실정이다. O&M 비용의 절감을 위한 가장 효율적인 방법은 CMS(Condition Monitoring System)의 도입이며 이는 풍력발전기 부품들의 악화, 적절한 선제적 유지보수, 발전중지시간의 단축 및 궁극적으로 풍력발전기의 운전 효율을 증대시키는 것을 가능케 한다. 풍력발전기의 터빈 로터와 관련하여 질량 불평형 및 공력비대칭과 같은 고장이 발생될 수 있다. 일반적으로 이러한 고장은 다양한 형태의 진동을 야기 시킨다. 이에 본 연구에서는 진동신호에 대한 스펙트럼과 간단한 max-min 진단 로직으로 구성된 고장검출 알고리즘을 제안한다. 또한 제안된 진단기법의 유용성의 확인을 위해 GH-Bladed 프로그램을 이용한 다양한 시뮬레이션 고찰을 수행한다.

• 대한전자공학회논문지SD
• /
• 제40권8호
• /
• pp.598-609
• /
• 2003

본 논문에서는 CMOS IF PLL 주파수합성기를 설계하였다. 설계된 주파수합성기는 칩 외부에 LC 공진 회로를 원하는 값에 맞게 바꿈으로써 다양한 중간 주파수에서 동작 가능하다. VCO는 자동진폭조절 기능을 갖도록 설계하여 LC 공진회로의 Q-factor에 무관하게 일정한 진폭의 출력을 발생한다. 설계된 주파수분주기는 8/9 또는 16/17 dual-modulus prescaler를 포함하며, 다양한 응용분야에 적용 가능하도록 외부 직렬데이터에 의해 동작 주파수를 프로그램할 수 있도록 하였다. 설계된 회로는 0.35㎛ n-well CMOS 공정을 사용하여 제작되었으며, 제작된 IC의 성능을 측정한 결과 260㎒의 동작주파수에서 위상잡음은 -114dBc/Hz@100kHz 이고 lock time은 300㎲보다 작다. 설계된 회로는 3V의 전원전압에서 16mW의 전력을 소모하며, 칩 면적은 730㎛×950㎛이다.

• 한국전자파학회논문지
• /
• 제28권11호
• /
• pp.924-927
• /
• 2017

본 논문에서는 6~18 GHz 대역 8-비트 true time delay(TTD) 회로의 설계 및 측정결과에 대하여 기술하였다. 단위 지연 회로는 상대적으로 시간 지연 변화율이 일정한 m-유도 필터(m-derived filter)를 이용하였다. 설계한 8-비트 TTD는 2개의 single-pole double-throw(SPDT)와 7개의 double-pole double-throw(DPDT) 스위치로 구현하였으며, 인덕터를 이용하여 반사 특성을 개선하였다. 설계된 8-비트 TTD는 $0.18{\mu}m$ CMOS 공정을 이용하여 제작하였다. 측정된 TTD 회로의 시간 가변 범위는 250 ps이고, 시간 지연 해상도는 약 1 ps이다. 6~18 GHz의 동작 주파수에서 RMS 시간 지연 오차는 11 ps 미만이며, 입출력 반사 손실은 10 dB 이상이다. 공급 전압은 1.8 V이며, 소비 전력은 0.0 mW이다. 칩 면적은 $2.36{\times}1.04mm^2$이다.

• 정보처리학회논문지C
• /
• 제15C권4호
• /
• pp.303-310
• /
• 2008

ad-hoc네트워크에서 네트워크의 생존시간을 연장하기 위해서는 네트워크 트래픽 부하를 전체 네트워크에 골고루 분산시켜 노드당 평균 에너지 소모율을 균일하게 유지할 수 있어야만 한다. 본 논문에서는 노드의 에너지 잔량 및 사용 빈도 등을 고려해 경로를 설정하는 수정 AODV 프로토콜을 제안하였다. 또한 경로 재설정 과정에서 생성되는 엄청난 양의 AODV 제어 메시지 발생으로 인한 에너지 소모를 줄이기 위해 출발지 노드의 버퍼에 다중 경로 정보를 저장하도록 하였다. 링크 단절 시 경로 재설정 과정 전에 경로 테이블에 저장된 경로 정보를 활용할 수 있도록 하였다. 본 논문에서 제안한 알고리즘의 성능 평가를 위해 기존 AODV 및 에너지 기반 라우팅 프로토콜인 MMBCR방식과 전체 노드의 에너지 잔량, 네트워크 생존시간 및 데이터 패킷 수신율 등 3가지 평가 항목을 사용해 비교하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.324-327
• /
• 2005

An electrophoretic display using $TiO_2$ particles is the most promising candidate because it offers various advantages such as ink-on-paper appearance, good contrast ratio, wide viewing angle, image stability in the off-state and extremely low power consumption. The core technology of electrophoretic display is the dispersion controlling of $TiO_2$ nano particles in nonaqueous solution. To prepare an ink for electronic paper using electrophoretic properties of $TiO_2$ nano particles, cyclohexane with low dielectric constant and transparency, polyethylene for producing polymer coating layer which reduces apparent gravity of $TiO_2$, and $TiO_2$ powders were mixed together by planetary-mill. The zeta-potential value of $TiO_2$ particles in cyclohexane was measured about -40mV, but was measured over -110mV by dispersant attached to polyethylene-coated $TiO_2$ surface. Prepared electronic ink was filled in cross patterned micro-wall with $200{\mu}m$ in width and $40{\mu}m$ in height on ITO glass designed by photolithography. The response time of electronic paper evaluated by mobility of $TiO_2$ particle between micro-walls was measured 0.067sec, but the drift velocity from reflectance wave form during reverse from of electronic ink was measured 0.07cm/sec.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.242-242
• /
• 2006

Increasingly complex tasks are performed by computers or cellular phone, requiring more and more memory capacity as well as faster and faster processing speeds. This leads to a constant need to develop more highly integrated circuit systems. Therefore, there have been numerous studies by many engineers investigating circuit patterning. In particular, PCB including module/package substrates such as FCB (Flip Chip Board) has been developed toward being low profile, low power and multi-functionalized due to the demands on miniaturization, increasing functional density of the boards and higher performances of the electric devices. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. The imprint technique. is one of promising candidates, especially due to the fact that the expected resolution limits are far beyond the requirements of the PCB industry in the near future. For applying imprint lithography to FCB, it is very important to control thermal properties and mechanical properties of dielectric materials. These properties are very dependent on epoxy resin, curing agent, accelerator, filler and curing degree(%) of dielectric materials. In this work, the epoxy composites filled with silica fillers and cured with various accelerators having various curing degree(%) were prepared. The characterization of the thermal and mechanical properties wasperformed by thermal mechanical analysis (TMA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), rheometer, an universal test machine (UTM).

• 드라이브 ㆍ 컨트롤
• /
• 제18권4호
• /
• pp.19-27
• /
• 2021

A bunker bed is a type of furniture that efficiently utilizes a narrow indoor space by having a high bed and using the empty space below as a living and storage space. The demand for multi-purpose furniture is increasing due to the recent increase in single-person households and wide-spread shared accommodation. According to the consumer research, one of the major drawbacks of a bunker bed was to get on and off the bed through a ladder or stairs. In order to overcome these problems, it was confirmed that the height adjustment function that can easily adjust the minimum and maximum heights of the bed was necessary. In this study, a height adjustable bunker bed was designed by using a gas spring that generates a repulsive force by the compressed gas inside. The design process consisted of the following three steps: Firstly, the hysteresis characteristics due to a friction and spring constant of a commercial gas spring were confirmed by measuring the repulsive force vs. compressed displacement. Secondly, requirements of the vertical lifting force exerted on the bed against gravity force were derived. Finally, the height-adjustable bed using the four-bar link mechanism was designed with 4 parameters so that the bed weight of 60-70 kgf could be adjusted to 800 mm in height by an affordable initial operation force. The performance was verified through prototype production and the results of vertical displacement and force to move were nearly the same as designed. In addition, an electrically operated height-adjustable bed was also designed with linear actuators and the performance was proved with the prototype.