• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.207-210
• /
• 2003

As reviewing of current trend on PC connection details, owing to effective stress transfer in the connection, it grow to increase that use of mechanical splices, reinforcements or welded splices, and prestressing. However such devices as reinforcement, mechanical splices entail not only more cost resulted from materials but also extra construction process so as to cause PC used method to lower competition against conventional method. Therefore more enhanced connection details which help working process simplified and construction cost reduced. In this research, as replace 9.3mm 7strand for reinforcement, it is attempt to devise connection detail which makes workability improve and confirm effective stress transfer in the region of connection. The experimental research is proceeded by partial tension test of specimen. The splice lengths of 7strand is decided to be variations. The flexural capability is verified to depend on spice length. An an appropriate splice length could be also determined as a precedent research on improving PC connection detail.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.61-67
• /
• 2015

The concept of horizontal shear connection utilization on wood-concrete beams intends to be an alternative connection detail for composite wood-concrete decks. The volume of sawn-wood is over three times more expensive than concrete, in Brazil. In order to be competitive in the Brazilian market we need a composite deck with the least amount of wood and a simple and inexpensive connection detail. This research project uses medium to high density tropical hardwoods managed from the Brazilian Amazon region and construction steel rods. The beams studied are composed of a bottom layer of staggered wood boards and a top layer of concrete. The wood members are laterally nailed together to form a wide beam, and horizontal rebar connectors are installed before the concrete layer is applied on top. Two sets of wood-concrete layered beams with horizontal rebar connectors (6 and 8) were tested in third-point loading flexural bending. The initial results reveal medium composite efficiency for the beams tested. An improvement on the previously conceived connection detail (set with six connectors) for the composite wood-concrete structural floor system was achieved by the set with eight connectors. The new layout of the horizontal rebar connectors added higher composite efficiency for the beams tested. Further analysis with advanced rigorous numerical Finite Element Modeling is suggested to optimize the connection parameters. Composite wood-concrete decks can attend a large demand for pedestrian bridges, as well as residential and commercial slabs in the Brazilian Amazon.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.50-61
• /
• 2012

In recent years, various research and developments to introduce composite bridges of new concept have been performed. The types of integral bridge and portal rigid frame bridge are having advantages in bridge maintenance and structural efficiency by eliminating expansion joints and bridge supports. However, the detail of typical girder-abutment connection has problems such as complexity of construction and increase of the construction cost. A new type of bridge, called prestress integral composite girder(PIC girder) bridge, is proposed in this study, which decreases the cost of construction and improves the efficiency of construction by simplifying the detail of construction for girder-abutment connection. PIC girder bridge has the connection detail in which the steel girder and the abutment are integrated by using the PS bar installed in the connection. In this study, finite element analysis and mock-up load test are conducted to evaluate the propriety of design, the effective of fabrication and structural safety for PIC girder bridge. The adequacy of the PIC giredr bridge is verified by the results of static/dynamic load test and finite element analyses.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.24-35
• /
• 2014

An experimental study on the structural behavior of connection types between approach slab and integral abutment has been done for three typical bar connections. Typical hinge style reinforcing bar detail for its connection is preferred in order to accommodate rotation of the approach slab among engineers. However, the straight horizontal bars can be used as connection detail accomodate structural capacity. Total six specimens with three types of rebar detail are tested for direct tensile and bending load. The characteristic structural behaviors are carefully monitored and all the strain gauge data obtained are analyzed. It is shown that the structural performance of all the specimens well exceed its design allowance. Several design suggestions are given based on careful reviews on the experiment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.839-844
• /
• 2007

In order to reduce resultant stress of the connection detail of longitudinal and rib and floor beam, in this study, the parameter studies for the reinforcement details as the bulk head and the vertical rib were preformed with FE analysis. As the result, it was shown that reinforcement detail with the bulk head plate in longitudinal rig reduced generally the principal stress at the connection detail, but the stress concentration of the weld toe parts occurring fatigue crack increased. However, it was known that the reinforcement detail with the vertical rib in the rib is more effective than the bulk head plate of the reduction stress concentration in the weld toe parts.

• 한국강구조학회 논문집
• /
• 제20권6호
• /
• pp.807-815
• /
• 2008

1994년 노스리지 지진 이전 우수한 연성능력을 보유한 내진상세로 생각되던 WUF-B 접합부의 기둥-보플랜지 용접위치에서 발생 한 취성파괴는 WUF-B 접합부에 대한 새로운 고찰을 요구하였다. FEMA(Federal Emergency Management Agency)의 후원으로 SAC Steel Project에서는 WUF-B 접합부의 스캘럽(Weld access holes) 형상, 용접과정, 용접재료 등을 개정한 내진상세를 FEMA-350에 제안하 였다. AISC Seismic Provisions(2005)에서는 WUF-B 접합부를 OMF(Ordinary Moment Frames)로만 사용하도록 규정하고 있다. 본 연 구에서는 SM490 및 SN490 조립형강을 이용하여 FEMA-350에 제시된 WUF-B 상세 규정을 따라 강종(SM, SN), 보플랜지두께, 보의 춤을 변수로 기둥-보 접합부 실대 실험체 2개를 제작하여 실험을 수행하였으며, 내진성능 평가를 위한 가력 방법 및 내진성능을 평가하였다. JB-1, JB-2 실험체는 AISC Seismic Provisions(2005)에서 제시하고 있는 OMF와 SMF 내진성능을 만족하는 결과를 나타났으며, 보플랜지 두께와 보의 춤에 따른 WUF-B 접합부의 내진성능이 재정의 될 필요가 있는 것으로 사료된다.

• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.249-258
• /
• 2012

교대 일체식 교량과 강합성 라멘교는 유지보수의 주된 원인이 되는 신축이음 및 받침이 생략되어 유지관리 및 구조적인 장점을 얻을 수 있는 교량 형식이다. 하지만, 통상적으로 거더를 교대에 매립하는 형태로 시공되는 접합부는 시공상세가 복잡하고 접합부의 시공상세를 간략화하여 시공효율을 향상시킨 새로운 교량 형식을 제안하였다. 제안된 형식의 교량은 PS 강봉에 긴장력을 도입하여 강재로 제작된 거더와 교대를 일체화하는 형태의 교량이다. 이 연구에서는 PS 강봉으로 일체화된 접합부의 피로 성능을 평가하기 위하여 접합부에 대한 유한요소해석 및 피로실험을 실시하였다. 유한요소해석 결과, 제안된 교량의 접합부는 기본적으로 피로에 의한 손상의 가능성이 매우 낮은 것으로 나타났으며, 피로시험 결과로부터 2,000,000회의 피로반복하중이 재하된 상태에서도 접합부의 일체화 성능을 유지하고 있는 것을 확인할 수 있었다.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.641-652
• /
• 2004

철골 기둥-보 강축 접합부에 대한 연구는 그 동안 국내외에서 오랜 기간 연구가 진행되어 내진성능 및 접합부의 강도를 개선시킬 수 있는 많은 접합 형식이 개발되어 사용 중에 있으나, 약축 접합 형식에 대한 연구는 거의 없는 실정이다. 또한 현재 국내에서는 시공성을 고려하여 기존의 브라켓형식 용접 접합부를 선호하고 있으나, 용접량이 많아 취성적인 거동이 우려되며 과대 설계된 경향이 있다. 본 연구의 실험 결과에서 기존 브라켓 형식 용접접합은 용접량이 과도한 것으로 나타났으며, 기둥 웨브와 보의 웨브의 용접은 불필요한 것으로 판단된다. 그리고 본 연구에서 제안한 새로운 기둥-보 약축 접합형식들에 대한 실험 결과에서 기존 브라켓형식 용접접합보다 우수한 내력 및 연성을 보유하여 구조적으로 안전함을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제51권2호
• /
• pp.215-228
• /
• 2014

Traditional beam connections to the minor axis of a column have relatively low strength and stiffness. A modified detail, using a plate welded between the toes of the column flange - referred to as a toe plate connection - is examined in this paper. The results of an experimental investigation for both flush and extended end-plate connections connected to a 25 mm thick end-plate are presented. The tests are complemented by finite element modelling which compares very well with the test observations. The results show a significant increase in both moment resistance and initial stiffness for this connection detail compared with connections made directly to the column web. This offers the prospect of more optimal solutions taking advantage of partial strength frame design for the minor axis as well as major axis.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.138-141
• /
• 2006

Shear wall-frame system is one of the most, if not the most, popular system for resisting lateral loads. The core is the primary lateral load-resisting systems, the perimeter frame is designed for gravity loads, and the connection between perimeter frame and core is generally a shear connection. Specially, single plate shear connection have gained considerable popularity in recent years due to their ease of fabrication and erection. Single plate shear connection should be designed to satisfy the dual criteria of shear strength and rotational ductility. An experimental program was undertaken to evaluate seismic behavior of single plate shear connection. The main test variable is the reinforcing detail of connection. Through the experimental program, the cyclic behavior of typical and reinforcing single plate shear connection was established.