• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4933-4938
• /
• 2014

Background: Although various tumor markers have been utilized in management of stomach cancer (SC), only a few reports have described relevance of examples such as CYFRA 21-1 and neuron-specific enolase (NSE). The purpose of this study was to evaluate the potential diagnostic performance of carcinoembryonic antigen (CEA), CA 19-9, CA72-4, CYFRA 21-1 and NSE in patients with SC. Materials and Methods: Ninety-six SC patients with pathologic confirmation between 2012 and 2013 were enrolled. Serum levels of five tumor markers were analyzed using a solid-phase immunoradiometric assay. Receiver operating characteristic (ROC) curves were plotted for the five tumor markers to investigate their diagnostic powers and adjusted cutoff values derived from analysis of ROC curves were evaluated to calculate the sensitivity of each for SC with recommended cutoff values. Results: Based on two different cutoff values (recommended and adjusted), CYFRA 21-1 (${\geq}2.0$ and 1.2 ng/ml) had a respective sensitivity of 50% and 78.1%, compared with 8.3% and 18.8% for CEA (${\geq}7.0$ and 3.9 ng/ml), 15.6% and 18.8% for CA 19-9 (${\geq}37$ and 26.7 ng/ml), 28.1% and 9.6% for CA 72-4 (${\geq}4.0$ and 13 ng/ml) and 7.3% and 7.3% for NSE (${\geq}14.7$ and 15.0 ng/ml) in the initial staging of primary SC. The area under the curve (AUC) for CYFRA 21-1, with a value of 0.978 (95% confidence interval, 0.964-0.991) was comparatively the highest. Univariate analysis revealed significant relationships between tumor marker level and lymph node involvement, metastasis and staging with CYFRA 21-1, CA 72-4 and NSE. Conclusions: CYFRA 21-1 was the most sensitive tumor marker and showed the most powerful diagnostic performance among the five SC tumor markers. NSE and CA 72-4 are significantly related to lymph node involvement, metastasis or stage. Further evaluations are warranted to clarify the clinical usefulness and prognostic prediction of these markers in SC.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.43-51
• /
• 2001

Now our ocean environment pollution is very serious. Its harm hinders in marine breeding and the safe navigation of ships at the coast. We have used an assembly system for a measure taken against environment pollution like this. But, here are some problems awaiting solution. First, most of combustible materials among ocean waste are high polymer, so it is necessary some special equipment to incinerate them. In the process we can't overlook air pollution by exhaust gas. Also, when we reclaim these wastes, we remember that they can't be decomposed naturally and leaking water may pollute soil. Thus now a days new treatment method has been developed, it recycles and doesn't product secondary pollution materials by recovering oil from pyrolysis. For it, this study investigated chemicalㆍphysical properties of wastes. And it found condition of recovering the most oil. Also it probed that the variation of temperature raising speed affects the weight reduction characteristics of wastes. Also, while studying recovered oil by waste pyrolysis and the rate of non-condensing gas in accordance with the variation of temperature raising speed. Finally we had confidence the development of pyrolysis oil recovery would succeed because we carried out evaluation at an economic point of view about it.

• The Korean Journal of Physiology and Pharmacology
• /
• v.12 no.4
• /
• pp.205-209
• /
• 2008

Recently, Sun et al (2008) reported that the IL6R polymorphism is associated with schizophrenia. Therefore, to detect the association between polymorphisms of interleukin 31 receptor A (IL31RA) and schizophrenia, we genotyped 9 SNPs [rs9292101 (intron 1), rs1009639 (exon 2, Pr043Pro), rs2161582 (intron 2), rs68761890 (intron 5), rs16884629 (intron 6), rs11956465 (intron 12), rs12153724 (intron 12), and rs16884641 (intron 14)] using the Golden Gate assay on Illumina BeadStation 500 GX. Two hundred eighteen patients with schizophrenia and 379 normal subjects were recruited. Patients with schizophrenia were diagnosed according to DSM-IV, and control subjects without history of psychiatric disorders were selected. We used SNPStats, Haploview, HapAnalyzer, SNPAnalyzer, and Helixtree programs for the evaluation of genetic data. Of nine polymorphisms, three SNPs (rs9292101, rs1009639, and rs11956465) were associated with schizophrenia. The rs9292101 and rs11956465 showed significant associations with the risk of schizophrenia in the codominant [rs9292101, odds ratio (OR)=0.74, 95% confidence interval (CI)=0.58${\sim}$0.95, p=0.017] and recessive (rs11956465, OR=0.64, 95% CI=0.42${\sim}$0.96, p=0.034) models, respectively. The rs1009639 also was statistically related to schizophrenia in both codominant (OR=0.76, 95% CI=0.60${\sim}$0.97, p=0.025) and dominant (OR=0.66, 95% CI=0.44${\sim}$0.98, p=0.035) models. Two linkage disequilibrium (LD) blocks were made. In the analysis of haplotypes, a haplotype (GCT) in block 1 and a haplotype (CCACAG) in block 2 showed significant associations between schizophrenia and control groups (haplotype GCT, frequency=0.509, chi square=4.199, p=0.040; haplotype CCACAG, frequency=0.289, chi square=5.691, p=0.017). The results suggest that IL31RA may be associated with risk of schizophrenia in Korean population.

• Journal of Korea Technology Innovation Society
• /
• v.18 no.3
• /
• pp.468-491
• /
• 2015

The major objective of this research is to suggest the proactive strategy and management of public R&D for the active transfer of technology based on the influential factor analysis of technology transfer. This study identified influential factors which make the greatest impact on the success of public technology transfer and commercialization through three points of view-technology supplier's view, technology adopter's view and view of commercialization-which contribute to successful technology transfer and commercialization. The core influential variables for blocking technology transfer are identified such as additional technological development, search for technology adopter followed by mass production technology and testing of confidence. Technology adopter is to create new markets or expand existing markets through the superiority (innovation) of licensing technology, increasing the internal innovation capabilities and maximizing the impacts of technology. This research suggests two effective strategies for improving technology transfer such as technology planning and marketing in the view of technology license. The strategy of technology planning should be established and executed to meet both technology trends and adopter's needs. And strong patents should be secured in terms of licensing of technology. Also the technological performance should be evaluated at mid-term appraisal, confirming the needs of adopter and competitive advantage of technology and patent. In addition to this, the customized technology marketing strategy for different fields of applications is also required in order to improve the likelihood of technology transfer. If the performance of R&D organization could be evaluated by global technological competitiveness and spillover effects of commercialization rather than quantitative output, the flow of technology transfer and commercialization would be accelerated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.310-315
• /
• 2017

Although studies evaluating the effects of the blasting vibration on the adjacent structures from various angles have continued, cases of securing the safety of the adjacent buildings and researching the proper blasting method for the field condition by analyzing the vibration waveform of the measuring field while performing the open pit blasting are poor. Therefore, it is necessary to present a remedy for blasting pattern selection through test blasting that is appropriate for field conditions, and is economical and efficient. In this study, open pit blasting work was conducted based on the separation distance applied according to the standard blasting method by test blasting and the vibration regulation standard in the road expansion construction site to measure the blasting vibration value, and the vibration prediction equation by blasting methods was examined using a regression analysis computer program to calculate K, N, and R of the confidence level 95%. By setting the blasting allowed vibration standard of the test blasting target area to 0.3cm/sec, and the charring weight and blasting method by the separation distances according to the blasting vibration estimation equation of the open pit blasting guideline and the blasting vibration estimation equation of the test blasting were compared/analyzed, it was possible to identify the factors that increased the working expenses. In addition, the measurement and analysis of the adjacent structures during open pit blasting and the blasting vibration were performed after selecting the most adjacent structure to the open pit blasting spot to analyze the problems on the test blasting procedure and analysis method in the open pit blasting design/construction guidelines, which appeared in the process of completing open pit blasting construction, and a remedy is presented.

• Journal of Distribution Science
• /
• v.15 no.1
• /
• pp.105-114
• /
• 2017

Purpose - Recently, domestic pharmaceutical market is growing steadily, but top-tier companies are concentrating on sales growth. In this market, SMEs, which account for more than 80% of the entire market, suffer from the problem of lower margins and increasing inventory costs. According to the government's policy changes related to pharmaceuticals, it is pointed out that the management of existing customers and the control of salespeople are important issues for pharmaceutical companies. This study investigates the effect of the control system on the salesperson in domestic pharmaceutical distribution channel on customer-oriented selling behaviors and sales performance. Research design, data, and methodology - To verify the proposed research model and test hypotheses, the authors selected 244 MR(medical representatives)'s responses which have currently relationship with doctors or pharmacists. This study carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed model. Results - The authors find out the following results: capacity control, activity control, and self control have positive effects on customer-oriented selling behaviors and customer-oriented selling behaviors have a positive effect on sales performance. In addition, we present alternative model to check the direct effect between the control systems and the sales performance, but control system factors except self control have no direct influence. Conclusions - First of all, competency control and activity control increases the customer-oriented selling behavior of the salesperson. This means that the salesperson's sales skill, negotiation skill, customer access skill, presentation ability, monitoring, direction and evaluation are important and it is also important to control activities to check the number of visits to customers, report preparation, and customer service etiquette. Second, the fact that self-control of salesperson affects the customer-oriented selling behavior suggests that self-control is not controlled by external factors but rather establishes short/long-term goals. Therefore, it is important for sales organization to create an environment in which members can induce persistent incentives for self-control. Finally, output control did not affect customer-oriented sales behavior, which is less likely to form confidence or motivation to MRs when output control is perceived as a means of monitoring, supervising, or controlling rather than providing information to salespeople.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1141-1149
• /
• 2009

In Bone Mineral Density(BMD) measurements, accuracy and precision must be superior in order to know the small changes in bone mineral density and actual biological changes. Therefore the purpose of this study is to increase the reliability of bone mineral density inspection through appropriate management of image quality from machines and inspectors. For the machine management method, the recommended phantom from each bone mineral density machine manufacturer was used to take 10~25 measurements to determine the standard amount and permitted limit. On each inspection day, measurements were taken everyday or at least three times per week to verify the whether or not change existed in the amount of actual bone mineral density. Also evaluations following Shewhart control chart and CUSUM control chart rules were made for the bone mineral density figures from the phantoms used for measurements. Various forms of management became necessary for machine installation and movement. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. There were two measurement methods followed: patients were either measured twice with 30 measurements or three times with 15 measurements. An important point to make regarding measurements is that after the first inspection and any other inspection following, the patient was required to come off the inspection table completely and then get back on for any further measurements. With a 95% confidence level, the precision error produced from the measurement bone mineral figures produced a precision error of 2.77 times the minimum of the biological bone mineral density change (Least significant change: LSC). In order to assure reliability in inspection, there needs to be good oversight of machine management and measurer for machine operation and inspection error. Accuracy error in machines needs to be reduced to under 1% for scientific development in bone mineral density machines.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.19-26
• /
• 2015

Purpose: Maximizing human comfort in design of medical environments depends immensely on specialized architects particularly critical care design; the study proposes Evidence-Based Design as an apparent analog to Evidence-Based Medicine. Healthcare facility designs are substantially based on the findings of study in an effort to design environments that augment care by improving patient safety and being therapeutic. On SPSS (Statistical Package for Social Science) t-test is applied to simulate two independent variables of PDR (Pre Design-Research) and POE (Post- Occupancy Evaluation). PDR is conducted on relatively new hospital Hallym University Dongtan Sacred Heart Hospital to analyse visibility from researchers' point of view, here the ICU is arranged in I-Shape. POE is applied on Dongguk University Ilsan Hospital to simulate walking on LogWare where two NS are designed based on L- Shape and Seoul St. Mary's Hospital, The Catholic University of Korea where five NS are functional for ICU Intensive Care Unit, Surgical Intensive Care Unit (SICU), Medical Intensive Care Unit (MICU), Critical Care Unit (CCU), Korean Oriental Medical Care Unit which are mostly arranged in U-Shape, and walking pattern is recognized to be in a zigzag path. Method: T-Test is applied on two dependent communication variables: walkability and visibility, with confidence interval of 95%. This study systematically analyses the Nurse Station (NS) typo-morphology, and simulates nurse horizontal circulation, by computing round route visits to patient's bed, then estimating minimum round route on LogWare stop sequence software. The visual connectivity is measured on depth map graphs. Hence the aim is to reduce staff stress and fatigue for better patients care by minimizing staff horizontal travel time and to facilitate nurse walk path and support space distribution by increasing effectiveness in delivering care. Result: Applying visibility graph and isovist field on space syntax on I- Shape, L- Shape and U- Shape ICU (SICU, MICU and CCU) configuration, I-shape facilitated 20% more patients in linear view as they stir to rise from their beds from nurse station compared to U-shape. In conclusion, it was proved that U-Shape supply minimum walking and maximum visibility; and L shape provides just visibility as the nurse is at pivot. I shape provides panoramic view from the Nurse Station but very rigorous walking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.154-160
• /
• 2018

This thesis aims to develop PBL (Problem-Based-Learning) problems. Its goal is for some groups of students to creative their own problems and to confirm the effectiveness of PBL as they apply it to AI (Artificial Intelligence) in engineering schools. Modern industrial society needs competent people who have abilities in cooperative learning, self-controlled learning, united knowledge application, and creative problem-solving. Universities need to offer their students the opportunity to improve their problem-solving and cooperative learning abilities in order to train the competent people that society demands. PBL activity is an appropriate learning method for the accomplishment of these goals. The study subjects are 37 sophomore students in H University who are studying 'AI'. Five PBL problems were submitted to the class over a period of 15 weeks. The students wrote and submitted a reflective journal after they finished each PBL activity. In addition, they filled out a class evaluation form to assess the performances of each member when the $5^{th}$ PBL problem activity was accomplished. The study shows that the students experienced the effectiveness of PBL in many fields, such as the comprehension of the studied contents (86.48%), comprehension of cooperative learning (94.59%), authentic experience (75.67%), problem-solving skills (89.18%), presentation skills (97.29%), creativity improvement (81.08%), knowledge acquisition ability (86.48%), communication ability (97.29%), united knowledge application (78.37%), self-directed study ability (86.48%) and confidence (97.29%). Through these methods, the students were able to realize that PBL learning activities play an important role in their learning. These methods prepare and enhance their ability to think creatively, work systematically and speak confidently as they learn to become competitive engineers equipped with the knowledge and skills that modern industrial society demands.

• Journal of Digital Convergence
• /
• v.15 no.6
• /
• pp.513-523
• /
• 2017

The purpose of this study is to examine how career decision-making self-efficacy and ego-resilience of college students after military service influence college life adjustment. For this purpose, the questionnaire was administered to 234 male college students who returned to the four-year university in Jeonbuk area. The collected data were analyzed by correlation analysis and hierarchical regression using SPSS 18.0. As a result of examining the correlation between each variables, the subscale adaptation of college life adjustment and university environment adaptation showed a positive correlation with the goal selection of career decision self-efficacy and optimistic attitude of ego-resilience. Future plan of career decision-making self-efficacy, optimistic attitude of ego-resilience and personal-emotional adaptation of college life adaptation showed a positive correlation between self-evaluation of career decision self-efficacy and self-resilience confidence. As a result of hierarchical regression analysis, it was found that ego-resilience had more influence on college life adjustment than career decision self-efficacy. The limitations of this study were discussed along with the significance of this study, which was revealed through data collection only for students who came back after military service.