• 재활간호학회지
• /
• 제14권1호
• /
• pp.5-12
• /
• 2011

Purpose: The purpose of this study was to evaluate the association among of Activity of Daily Living (ADL), Instrumental Activities of Daily Living (IADL), depression and isolation in disabled people. Method: The subjects consisted of 761 disabled people in Korea. Data were analyzed using descriptive statistics, t-test, ANOVA, and Pearson's correlational statistics. Results: There were significant differences in age, cause of disability, type of disability, degree of disability, education, job, perceived health condition, and economic status between disabled people with high and low levels of ADL and IADL. Depression showed significant differences in type of disability, degree of disability, education, job, perceived health condition, and economic state; isolation showed significant differences in age, cause of disability, type of disability, education, job, residence, perceived health condition, and economic status. A significant association was identified between depression and isolation (r=.69, p<.001). Conclusion: There was a high incidence of depression in disabled men with high levels of isolation and ADL and IADL dependence. An effort to increase disabled people's ADL, IADL, and independence levels is needed, and nursing interventions should be designed and tested to increase their community involvement and decrease the sense of isolation and depression.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.501-504
• /
• 1999

In the shallow trench isolation(STI) chemical mechanical polishing(CMP) process, the key issues are the optimized thickness control within- wafer-non-uniformity, and the possible defects such as nitride residue and pad oxide damage. These defects after STI CMP process were discussed to accomplish its optimum process condition. To understand its optimum process condition, overall STI related processes including reverse moat etch, trench etch, STI filling and STI CMP were discussed. It is represented that the nitride residue can be occurred in the condition of high post CMP thickness and low trench depth. In addition there are remaining oxide on the moat surface after reverse moat etch. It means that reverse moat etching process can be the main source of nitride residue. Pad oxide damage can be caused by over-polishing and high trench depth.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.359-366
• /
• 2002

Direct Integration method(D.I) and Mode Superposition method(M.S) are used widely in dynamic analysis method for structure with isolation devices. D.I is used firstly because it is consider to nonlinearity of isolation device. M.S is applied in elastic region, but it is difficult to apply M.S because coincidence with othogonality condition in the case of adding the damping of isolation device. In this study, the method for calculation of damping ratio of isolated structure is proposed, and proposed method is verified with analysis for example structure.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.120-127
• /
• 2001

Long term earthquake observations at different tunnel sites within a variety of alluvial soil deposits have demonstrated that a circular tunnel is liable to deform in such a way that its two diagonal diameters crossing each other expand and contract alternately. Based on this knowledge, the soil-tunnel interaction and isolation effect for this particular vibration mode is investigated. Interaction effect is considered with the condition of fixed tangential strain between the tunnel and the soil. Isolation effect embodied by covering up the tunnel with isolation materials is discussed as a possible measure for mitigating seismic damage to it. When Poisson`s ratio of isolation material decreases or the shear modulus ratios of the soil to isolation material become large, the isolation effect becomes bigger.

• Earthquakes and Structures
• /
• 제16권1호
• /
• pp.1-9
• /
• 2019

To provide a simplified method for the base isolation design of LNG tanks, such as $16{\times}104m^3$ LNG tanks, we conducted a derivation and calculation example analysis of the dynamic response of the base isolation of LNG storage tanks, using dynamic response analysis theory with consideration of pile-soil interaction. The ADINA finite element software package was used to conduct the numerical simulation analysis, and compare it with the theoretical solution. The ground-shaking table experiment of LNG tank base isolation was carried out simultaneously. The results show that the pile-soil interaction is not obvious under the condition of base isolation. Comparing base isolation to no isolation, the seismic response clearly decreases, but there is less of an effect on the shaking wave height after adopting pile top isolation support. This indicates that the basic isolation measures cannot control the wave height. A comparison of the shaking table experiment with the finite element solution and the theoretical solution shows that the finite element solution and theoretical solution are feasible. The three experiments are mutually verified.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.227-232
• /
• 2003

As the most precision equipment requiring very strict vibration environment are vulnerable to the surrounding vibration condition, they adapt the passive or active vibration isolation system. When it comes to the passive isolation system, the resonance of the isolation system causes excessive resonance response, and finally results in the degrade the equipment performance. This paper deals with the active control method to control this resonance induced response, and includes the experiment on the active control for controlling the resonance response on the table against the excitation of the same frequency with the natural frequency of the isolation system. The electromagnetic actuator was designed and the control effect was verified by the experiment. The experiment showed that the electromagnetic actuator is effective for controlling the low frequency isolation resonance response of the precision equipment.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.178-185
• /
• 1999

Minimum life-cycle cost helps to evaluate cost effectiveness of base-isolated bridges under specific condition. Life-cycle cost mainly consists of the initial construction cost and the expected damage cost. Damage cost estimation needs proper model of input ground motion failure probability evaluation method and limit states definition. We model the input ground motion as spectral density function compatible with the response spectra defined at each seismicity and site condition. Spectrum analysis and crossing theory is suitable for reseating calculation of failure probabilities in the process of cost minimization. Limit states of base-isolated bridges re defined for superstructure isolator and pier respectively The method is applied to both base-isolated bridges and conventional bridges under the same conditions to investigate cost effectiveness of base isolation in low and moderate seismic region. the results show that base-isolation of bridges are more effective in low and moderate seismic region and that the site effects on the economical efficiency may not be negligible in such a region.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권9호
• /
• pp.438-443
• /
• 2001

In the shallow trench isolation(STI)-chemical mechanical polishing(CMP) process, the key issues are the optimized thickness control, within-wafer-non-uniformity, and the possible defects such as pad oxide damage and nitride residue. The defect like nitride residue and silicon (or pad oxide) damage after STI-CMP process were discussed to accomplish its optimum process condition. To understand its optimum process condition, overall STI related processes including reverse moat etch, trench etch, STI fill and STI-CMP were discussed. Consequently, we could conclude that law trench depth and high CMP thickness can cause nitride residue, and high trench depth and over-polishing can cause silicon damage.

• 한국균학회지
• /
• 제22권2호
• /
• pp.138-144
• /
• 1994

Rhizopus nigricans의 포자와 균사체로부터 원형질체 생성을 위한 최적 조건을 조사하였다. 5% 2-deoxy-D-glucose가 첨가된 액체 배지에서 14시간 배양시킨 균사체보다 동일배지에서 4시간 배양하여 팽창시킨 포자로부터 더 많은 원형질체가 생성되었으며, Novozym 234(2%)를 단독으로 처리하였을 때보다는 5000 unit/ml 의 ${\beta}-glucuronidase$와 혼합하였을 때 원형질체의 생성율이 더 높았다. 삼투 안정제로 0.6 M $MgSO_4$를 사용한 복합 효소 용액(pH 6.0)에 2시간 처리하였을 때 팽창된 포자로부터 단위ml당 $8.0{\times}10^6$의 원형질체를 분리할 수 있었다.

• 한국어병학회지
• /
• 제19권2호
• /
• pp.119-126
• /
• 2006

본 연구에서는 Vibrio harveyi의 주요 병원성 인자로 알려져 있는 ECPs를 분리하는 적정 조건을 제시하고자 하였다. 5 개의 분리균주 (FF8, FF10, FR1, FR2 and FT1 strain)와 2 개의 참조균주 (ATCC 35084 및 ATCC 14126)의 ECPs를 다양한 조건에서 분리해 본 결과, 1.5% NaCl 첨가 TSA 배지에서 25℃, 24 시간 배양하는 것이 가장 좋으며, ECPs 분리시의 buffer system은 pH 8.0이 적정한 것으로 나타났다. 나아가 우리 나라에서 분리한 5 개의 분리 균주들의 주요 ECPs 성분이 serine protease인 것으로 조사되었다.