• International Journal of Railway
• /
• v.3 no.4
• /
• pp.117-122
• /
• 2010

In transportation geotechnical engineering, stress-strain behavior of earth structures has been analyzed by numerical simulations with the implemented plasticity constitutive model. It is a fact that many advanced plasticity constitutive models on predicting the mechanical behavior of soils have been developed as well as experimental research works for geotechnical applications in the past decades. In this study, recently developed, a unified constitutive model for both clay and sand, which is referred to as CASM (clay and sand model), was compared with a classical constitutive model, Cam-Clay model. Moreover, integration methods of stress-strain rate equations using CASM were presented for simulation of undrained and drained triaxial compression tests. As a conclusion, it was observed that semi-implicit integration method has more improved accuracy of capturing strain rate response to applied stress than explicit integration by the multiple correction and iteration.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.69-78
• /
• 2012

This research attempts to analyze how attributes of ad model influence on brand familiarity, personality, and preference among consumers. Attributes of ad model was classified into three; attractiveness, professionalism, and reliability. One hundred of consumers who lived in Daejeun City were selected as respondents for this research. The result of hypothesis I showed that attributes of ad model significantly influenced on brand familiarity. it was the result of hypothesis II that both Attractiveness and professionalism of ad model affected brand personality. It was also found that attractiveness and professionalism are significantly brand preference from the result of hypothesis III. In conclusion, findings showed that attractiveness of ad model mostly influenced on brand familiarity, personality, preference.

• Journal of Applied Reliability
• /
• v.18 no.2
• /
• pp.104-113
• /
• 2018

Purpose: This paper proposes the non-periodic preventive maintenance policy based on the level of cumulative hazard intensity. We aim to construct a cost-effectiveness on the proposed model with relaxing the constraint on reliability. Methods: We use the level of cumulative hazard intensity as a condition variable, instead of reliability. Such a level of cumulative hazard intensity can derive the reliability which decreases as the frequency of preventive maintenance action increases. We also model the imperfect preventive maintenance action using the proportional age setback model. Conclusion: We provide a numerical example to illustrate the proposed model. We also analyze how the parameters of our model affect the optimal preventive maintenance policy. The results show that as long as high reliability is guaranteed, the inefficient preventive maintenance action is performed reducing the system operation time. Moreover, the optimal value of the proposed model is sensitive to changes in preventive maintenance cost and replacement cost.

• Korean Journal of Childcare and Education
• /
• v.14 no.5
• /
• pp.47-64
• /
• 2018

Objective: This study investigated how early childhood teachers'creativity and teaching flow was associated with their job satisfaction and examined the mediating effect of teaching flow. Methods: Participants were 222 early childhood teachers in Seoul. Descriptive statistics for all study variables were computed. To examine the hypothesized model and the alternative model structural equation modeling (SEM) was used. Results: The results revealed that early childhood teachers'creativity and teaching flow were positively associated with their job satisfaction. Early childhood teachers'creativity had an influence on their teaching flow, however, it didn't have a direct affect on their job satisfaction. Early childhood teachers' teaching flow had an affect on their job satisfaction. Additionally, early childhood teachers'teaching flow mediated the effects of teachers' creativity on their job satisfaction. Conclusion/Implications: In conclusion, early childhood teachers'teaching flow was a key predictor in the relationship between teachers' creativity and job satisfaction. This study provides guidelines for interventions aimed at increasing the job satisfaction of early childhood teachers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.612-615
• /
• 2005

This studies presented truss frame which use aluminum beam by damage model. Truss frame which each joint part is contracted by bolt contracted conclusion of each bolt by 3.0 N/m. And measured impedance change that appear making bolt 0.5 N/m on damage condition 8 times. Compares impedance change of 5 segments that was set by measurement area and displayed result. To measure torque change of bolt, other damage model did not apply.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.221-234
• /
• 2014

Purpose: The Purpose of this study is to develop a model for predicting agent churn group in the cosmetics industry. We develope two models, pattern model and matrix model, which are compared regarding the prediction accuracy of churn agents. Finally, we try to conclude if there is statistically significant difference between two models by empirical study. Methods: We develop two models using the part of RFM(Recency, Frequency, Monetary) method which is one of customer segmentation method in traditional CRM study. In order to ensure which model can predict churn agents more precisely between two models, we used CRM data of cosmetics company A in China. Results: Pattern model and matrix model have been developed. we find out that there is statistically significant differences between two models regarding the prediction accuracy. Conclusion: Pattern model and matrix model predict churn agents. Although pattern model employed the trend of monetary mount for six months, matrix model that used the amount of sales per month and the duration of the employment is better than pattern model in prediction accuracy.

• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.427-441
• /
• 2005

In order to choose proper dispersion model and emission factors suitable in Korea in evaluating the effect of pollutants emitted by the vehicles in highway on nearby area, various road dispersion models and vehicle emission factors were reviewed. With theoretical inter-comparisons of the exiting models for line source, CALINE 3 and CALINE 4 models which were suggested by US EPA were selected as the road dispersion models for further evaluation with the measurement. The emission factors suggested by Korean Ministry of Environment was turned out to be appropriate since the classification of vehicle kinds was simple and easy to apply in Korea. The comparisons of predicted concentrations by CALINE 3 and 4 models with the measurements in flat, fill and bridge road types showed that CO and PM-10 were in good agreements with experiments and the differences between CALINE 3 and 4 models are negligible. The model concentrations of $NO_2$ by CALINE 4 were also in good agreement with the measurement but those by CALINE 3 were over-predicted. The discrepancies in CALINE 3 model were due to rapid decay reaction of $NO_2$ near the highway, which was not included in CALINE 3 model. For the road type with one & two side cutting grounds, the similar patterns as the flat & fill road type for CO, PM10, & $NO_2$ were observed but the number of data for comparison in these cases were not enough to draw the conclusion. These results lead to the conclusion that CALINE4 model is proper in road environmental impact assessment near the highway in flat, fill and bridge road types.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.347-358
• /
• 2012

Purpose: Given the mixture components - process variables experimental data, we propose the strategy to find the proper combined model. Methods: Process variables are factors in an experiment that are not mixture components but could affect the blending properties of the mixture ingredients. For example, the effectiveness of an etching solution which is measured as an etch rate is not only a function of the proportions of the three acids that are combined to form the mixture, but also depends on the temperature of the solution and the agitation rate. Efficient designs for the mixture components - process variables experiments depend on the mixture components - process variables model which is called a combined model. We often use the product model between the canonical polynomial model for the mixture and process variables model as a combined model. Results: First we choose the reasonable starting models among the class of admissible product models and practical combined models suggested by Lim(2011) based on the model selection criteria and then, search for candidate models which are subset models of the starting model by the sequential variables selection method or all possible regressions procedure. Conclusion: Good candidate models are screened by the evaluation of model selection criteria and checking the residual plots for the validity of the model assumption. The strategy to find the proper combined model is illustrated with examples in this paper.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.725-732
• /
• 2011

Purpose: Skin grafting is one of the most commonly used methods in reconstructive plastic surgery field, but complications such as color change, contracture or hypertrophy are common problems. However, pathophysiology of the color change after skin graft is not yet determined and no animal model is established. Methods: Full thickness skin grafts were performed on the dorsum of C57BL/6 mice. Serial chronological gross inspection for color change and pigmentation were examined. Melanin pigments were traced by Fontana-Masson staining and semi-quantitative analysis was performed. In addition, immunohistochemical staining of S-100, Micropthalmia related Transcription Factor (MITF) and Melan-A antibodies were also performed to observe melanocytes and their changes. Results: After skin graft, color change and pigment spots were observed in the graft. Fontana-Masson staining showed melanin pigments in the epidermal and dermal layers in all mice. Immunohistochemistry staining to S-100, MITF, Melan-A antibodies showed melanocytes at the basal layer of epidermis and dermis. Conclusion: In conclusion, we have established an animal model for skin pigmentation after skin graft. We believe this study may be useful in understanding of the behavior of melanocytes after skin graft.

• Research in Community and Public Health Nursing
• /
• v.18 no.4
• /
• pp.624-633
• /
• 2007

Purpose: The purpose of this study was to develop and test a structural model on work-related musculoskeletal disorders of women workers. Method: Data were collected from 237 women workers from industries such as electronics, food production and garment production, and analyzed by LISREL 8.54. Result: The fitness indices of the model are GFI=.87, NNFI=.91, PNFI= .74. Eight out of the ten paths were proved to be statistically significant: work environment$\rightarrow$social support, work environment$\rightarrow$health behavior, work environment$\rightarrow$-WMSDs, domestic work$\rightarrow$health behavior, social support$\rightarrow$health behavior, social support$\rightarrow$job satisfaction, health behavior$\rightarrow$job satisfaction, and job satisfaction$\rightarrow$WMSDs. Work environment. social support, health behavior and job satisfaction significantly influenced WRMDs. WRMDs were accounted for 35% by the predictor variables. Conclusion: In conclusion, this study identifies that work environment, social support, health behavior and job satisfaction are important factors affecting WMSDs. Therefore, in order to prevent WRMDs, it is most important to improve both physical work environment for female workers such as appropriate work station and tools fit for them and psychological environment such as less job demand and more decision latitude(worker control).