• 호남수학학술지
• /
• 제27권1호
• /
• pp.101-113
• /
• 2005

We define and study a concept of $T_A$-space which is closely related to the generalized Gottlieb group. We know that X is a $T_A$-space if and only if there is a map $r:L(A,\;X){\rightarrow}L_0(A,\;X)$ called a $T_A$-structure such that $ri{\sim}1_{L_0(A,\;X)}$. The concepts of $T_{{\Sigma}B}$-spaces are preserved by retraction and product. We also introduce and study a dual concept of $T_A$-space.

• 한국ITS학회 논문지
• /
• 제16권6호
• /
• pp.208-218
• /
• 2017

본 연구는 기존에 정의된 LDM(Local Dynamic Map)에 동적지도 정보 제공 기능을 확장한 차량LDM(V-LDM) 기술의 설계 및 개발, 성능 검증을 목적으로 한다. 이를 위해 LDM과 동적지도 정보 제공 관련 국제표준 및 관련 기술을 참고하여 차량LDM 시스템 구성을 설계하였다. 또한 자율주행을 위한 차로 수준의 정보를 갖는 정밀전자지도의 기본 구성을 제안하였고, 차량 전방의 주행 환경 정보(정적+동적 정보) 전달을 위한 메시지인 Dynamic Map (DM) 프로토콜의 기본 구조를 정의하였다. 경부고속도로의 기본구간을 대상으로 제안된 정밀전자지도와 DM프로토콜 전달 기능의 성능을 검증한 결과, 데이터 크기와 처리 수행 시간 모두 전방거리에 선형적으로 비례함을 확인하였고, 10Hz의 갱신 주기를 갖기 위해 전방 최대 250m에 해당하는 정보를 제공하는 것을 적절한 대안으로 제시하였다.

• 한국가정과학회지
• /
• 제7권1호
• /
• pp.69-80
• /
• 2004

The purpose of this study is to suggest methods for the community design through users' behavior study in apartment housing. This study was approached by using both theoretical investigation and empirical research. The theoretical investigation actualized the concept of community design in apartment housing through a literature survey. The empirical survey focused on seeking out a user-oriented design criteria based on the analysis of residents' usage behavior and mental map. The results of this study are as follow: First. regarding the analysis of the residents' attitude toward the share community space(SCS), it was found that the SCS made a sense as community facilities in apartment housing. Second, regarding the SCS through the metal map, it was shown that the sketch map analysis was a useful research method for the community design by actualizing the residents' behavior characteristics. Third. as to the results of analyzing the metal map, it was found that the considered characteristics in recognition of the SCS were related to the liking with the main paths, cross nodes of the moving line, the location of center. and the complexity. In conclusion, the SCS is the main of community design in apartment housing and the above characteristics in recognition are useful as the guidelines in the SCS planning.

• 디지털콘텐츠학회 논문지
• /
• 제16권5호
• /
• pp.795-803
• /
• 2015

본 논문은 스토리 데이터베이스를 가지고 사용자의 검색에 따라 유사도가 높은 스토리를 보여주는 서비스인 <스토리헬퍼>에서, 사용자의 검색 기록을 분석하여 사용자의 창작성향을 데이터베이스 상의 스토리와 비교하여 살펴보고 검색방법의 개선이 필요한 부분에 대해서도 고찰한다. 검색을 위한 질의-답변 정보를 공간적으로 투영한 스토리맵의 개념을 제안하고 이를 이용하여 질의어를 최소화하는 새로운 검색 UI를 제안한다. 사용자는 스토리맵을 이용하여 전체적인 스토리 분포를 한눈에 보면서 원하는 성향의 스토리를 탐색함으로써 빠르고 직관적으로 원하는 스토리를 찾을 수 있다.

• Journal of Computational Design and Engineering
• /
• 제1권1호
• /
• pp.48-54
• /
• 2014

In this paper, the authors propose a system for assisting mold designers of plastic parts. With a CAD model of a part, the system automatically determines the optimal ejecting direction of the part with minimum undercuts. Since plastic parts are generally very thin, many rib features are placed on the inner side of the part to give sufficient structural strength. Our system extracts the rib features from the CAD model of the part, and determines the possible ejecting directions based on the geometric properties of the features. The system then selects the optimal direction with minimum undercuts. Possible ejecting directions are represented as discrete points on a Gauss map. Our new point distribution method for the Gauss map is based on the concept of the architectural geodesic dome. A hierarchical structure is also introduced in the point distribution, with a higher level "rough" Gauss map with rather sparse point distribution and another lower level "fine" Gauss map with much denser point distribution. A system is implemented and computational experiments are performed. Our system requires less than 10 seconds to determine the optimal ejecting direction of a CAD model with more than 1 million polygons.

• International Journal of Advanced Culture Technology
• /
• 제7권1호
• /
• pp.43-48
• /
• 2019

The purpose of the study was to examine early childhood teachers' content knowledge of economic education. The subjects, 60 early childhood teachers, were asked to draw concept maps about early childhood economic education. Their concept maps were analyzed in terms of superordinate and subordinate concepts by contents and frequencies. The results were as follows. First, 248 superordinate concepts were shown, and they were categorized into nine representative terms: 'Scarcity and Choice,' 'Decision Making,' 'Monetary Value,' 'Production,' 'Consumption,' 'Distribution,' 'Restrain,' 'Reuse,' and 'Economic Education Activity.' Second, 1,440 subordinate concepts were shown, and 'coin,' 'bill,' 'saving,' 'bank,' and 'money' were frequently shown. Third, the mean numbers of subordinate concepts per superordinate concepts showed that early childhood teachers had more knowledge about 'Consumption,' 'Monetary Value,' and 'Economic Education Activity' than other superordinate concepts. The results showed the need for early childhood teachers to have more systematic and hierarchical pedagogical content knowledge on economic education.

• 한국과학교육학회지
• /
• 제29권6호
• /
• pp.693-711
• /
• 2009

이 연구의 목적은 제 7차 교육과정의 초 중등학교에서 가르치는 생물 수업 목표 간의 연계성을 분석하는 것이다. 이 연구를 위해 각학년에서 7개의 중요한 영역인 세포, 식물의 형태와 기능, 동물의 형태와 기능, 유전, 생물의 다양성, 진화, 생태와 환경 영역을 분석하였다. 목표들 간의 관계를 나타내기 위해 수업 목표의 연계성 지도를 제시하였다. 이 연구 결과의 요약은 다음과 같다. 첫째, 세포에 대한 개념은 초등학교를 포함해서 저학년에서 충분히 다루어지지 않고 있다. 에너지 대사 개념이 반복적으로 다루어지고 있지만, 초등학교에서 에너지 대사 개념을 학습할 때 에너지 개념은 다루지 않았다. 둘째, 고등학교와는 달리 초등학교와 중학교의 교과서들이 식물의 형태와 기능에 관한 주요 개념들을 다루고 있다. 셋째, 유전과 진화와 같은 개념이 추상적인 개념이어서 중학교 이상인 고학년에서 다루어지고 있다. 생물의 다양성뿐만 아니라 유전과 진화가 학년간의 연계성이 없어서, 새로운 교육과정에서는 이러한 개념들 간의 연계가 필요하다. 넷째, 생물의 다양성, 생태와 환경, 진화 그리고 식물의 형태와 기능 영역이 일부 학년 수준에서만 제한적으로 다루어지고 있다. 초중고의 모든 학년을 통하여 수업 목표간의 연계성을 알아보는 수업 목표 간의 연계성 분석 결과는 교육과정과 교과서 개발을 위한 초기 자료로써 중요한 역할을 할 것이다.

• 한국경영과학회지
• /
• 제32권4호
• /
• pp.37-50
• /
• 2007

Dramatic development of information technology requires new type of sales strategy to enterprise S/W dealers. That is, one should thoroughly consider diversified types of enterprise S/W and more elaborated consumer needs to establish successful sales strategy. However, various factors that should be considered in establishing enterprise S/W sales strategy are different according to types of enterprise S/W and hard to be managed systematically which led to the current situation where they have not been discussed enough. Therefore, this study introduced the relationship between the factors that affect selection of enterprise S/W using the concept of cognitive map on various enterprise S/W sales cases. Through this process, this study grouped the cognitive maps of similar cases to introduce their characteristics and made this result to be practically useful to enterprise S/W sales strategy.

• 소성∙가공
• /
• 제16권6호
• /
• pp.473-478
• /
• 2007

In this study, a deformation mechanism map of metallic nanocrystalline materials(NCMs) using the phase mixture model is proposed. It is based on recent modeling that appears to provide a conclusive description of the phenomenology and the mechanisms underlying the mechanical properties of NCMs. The proposed models adopted the concept of a 'phase mixture' in which the grain interior and the grain boundaries are treated as separate phases. The volume fraction of this grain boundary 'phase' may be quite appreciable in a NCM. Based on the theoretical model that provides an adequate description of the grain size dependence of plasticity covering all grain size range from coarse down to the nanoscale, the tensile deformation response of NCMs, especially focusing on the deformation mechanisms was investigated. The deformation mechanism map is newly proposed with axes of strain rate, grain size and temperature.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.83-91
• /
• 1999

In this paper, we suggest a virtual machining system that can simulate cutting forces of ball end milling at the stage of part design. Cutting forces, here, are estimated from the machanistic model that uses the concept of specific cutting farce coefficient. To this end, we need undeformed chip thickness which is used for calculating chip load. It is derived from the Z-map data of a CAD model. That is, chip load is the height difference between the cutting tool and the workpiece at an arbitrary position. The tool contact point is referred from the cutter location data. On the other hand, the workpiece height is acquired from the Z-map model of a CAD data. From the experimental verification, we can simulate machining process effectively to the slot and the side cutting of ball end mill.