• YAKHAK HOEJI
• /
• v.40 no.6
• /
• pp.621-624
• /
• 1996

Betaine was treated with hydrochloric acid and then with sodium borohydride to give a hydroxy compound 2. The reaction of 2 with thionyl chloride followed by thiourea led a comp ound 5. Oxidation of compound 2 with pyridinium dichromate(PDC) and succesive treatment with Lawesson's reagent also afforded the same compound 5. Cleavage of N-C14 bond compound of 7 was carried out via two reaction sequence from the compound 4. Finally, compound 10 was sythesized by a series of transformations from the compound 4.

• Current Photovoltaic Research
• /
• v.5 no.3
• /
• pp.83-88
• /
• 2017

The growth of intermetallic compounds is an important factor in the reliability of solar cells. Especially, the temperature change in the soldering process greatly affects the thickness of the intermetallic compound layer. In this study, we investigated the intermetallic compound growth by Sn-diffusion in solder joints of solar cells. The thickness of the intermetallic compound layer was analyzed by IR lamp power and hot plate temperature control, and the correlation between the intermetallic compound layer and the adhesive strength was confirmed by a $90^{\circ}$ peel test. In order to investigate the growth of the intermetallic compound layer during isothermal aging, the growth of the intermetallic compound layer was analyzed at $85^{\circ}C$ and 85% for 500 h. In addition, the activation energy of Sn was calculated. The diffusion coefficient of the intermetallic compound layer was simulated and compared with experimental results to predict the long-term reliability.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.318-321
• /
• 2011

A new Fe-based amorphous compound powder was prepared from Fe-Si-B amorphous powder by crushing amorphous ribbons as the first magnetic component and Fe-Cr-Mo metallic glassy powder by water atomization as the second magnetic component. Subsequently by adding organic and inorganic binders to the compound powder and cold pressing, the new Fe-based amorphous compound powder cores were fabricated. This new Fe-based amorphous compound powder cores combine the superior DC-Bias properties and the excellent core loss. The core loss of 500 kW/$m^3$ at $B_m$ = 0.1T and f = 100 kHz was obtained When the mass ratio of FeSiB/FeCrMo equals 3:2, and meanwhile the DC-bias properties of the new Fe-based amorphous compound powder cores just decreased by 10% compared with that of the FeSiB powder cores. In addition, with the increasing of the content of the FeCrMo metallic glassy powder, the core loss tends to decrease.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.97-102
• /
• 2002

The growth kinetics of intermetallic compound layers formed between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad by solid stateisothermal aging were examined. The interfacial reaction between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad was investigated at 70, 120, 150, $170^{\circ}C$ for various times. The intermetallic compound layer was composed of two phase: $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the solder and $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the copper and on solder/Ni pad the intermetallic compound layer was $Ni_3Sn_4$. Because the values of time exponent(n) have approximately 0.5, the layer growth of the intermetallic compound was mainly controlled by volume diffusion over the temperature range studied. The apparent activation energy for layer growth of total Cu-Sn($Cu_6Sn_5 + Cu_6Sn$), $Cu_6Sn_5$, $Cu_3Sn$ and $Ni_3Sn_4$ intermetallic compound were 64.82kJ/mol, 48.53kJ/mol, 89.06kJ/mol and 71.08kJ/mol, respectively.

• Elastomers and Composites
• /
• v.56 no.4
• /
• pp.223-233
• /
• 2021

In this study, epoxidized liquid isoprene rubber (E-LqIR) was used as a processing aid in a silica-filled natural rubber compound to improve the fuel efficiency, abrasion resistance, and oil migration problems of truck and bus radial tire tread. The wear resistance, fuel efficiency, and extraction resistance of the compound were evaluated according to the molecular weight of E-LqIR. Results of the evaluation showed that the E-LqIR compound had a lower chemical crosslink density than that of a treated distillate aromatic extract (TDAE) oil compound because of the sulfur consumption of E-LqIR. However, the filler-rubber interaction improved because of the reaction of E-LqIR with silica and crosslink with the base rubber by sulfur. As the molecular weight of E-LqIR increased, crosslink with sulfur was facilitated, and the filler-rubber interaction improved, resulting in improved abrasion resistance. The fuel efficiency performance of the E-LqIR compound was poorer than that of the TDAE oil compound because of the low chemical crosslink density and hysteresis loss at the free chain end of E-LqIR. However, the fuel efficiency performance improved as the molecular weight of E-LqIR increased.

• The Journal of Internal Korean Medicine
• /
• v.11 no.2
• /
• pp.22-42
• /
• 1990

Sabaiksan has been prescribed to treat various allergic diseases in herbal medicine which were induced by various vasoactive amine released from the mast cells. The constituents of Sabaiksan are Mori Cortex Radices(MCR), Lycii Cortex Radicis(LCR) and Glycyrrhizae Radix(GR). Recently, simple models of compound 48/80 induced anaphylactic shock and cutaneous reaction in vivo were developed to test various agents employed in the field of allergy and toxicology research. The purpose of this study is to evaluate the effects of Sabaiksan on compound 48/80 induced anaphylactic stock, cutaneous reaction and mesenteric mast cell degranulation rate in ICR mice, and on compound 48/80 induced peritoneal mast cell degranulation and histamine release in vitro. Groups of ICR mice were intraperitoneally pretreated with $100{\mu}{\ell}$ of saline, $MCR(2g/m{\ell}),\;LCR(2g/m{\ell}),\;GR(g/m{\ell})$ or Sabaiksan itself(MCR+LCR+GR) at 24, 12 and 1 hour before compound 48/80 solution ($10{\mu}{\ell}/gm$ B. W) were peritoneally given into them, and then mortality within 72 hours after the compound 48/80 injection, and mesenteric mast cell degranulation rate at 15 minutes after compound 48/80 injection were calculated. In vitro experiment, $400{\mu}{\ell}$ of rat peritoneal mast cell suspension$(10^6cell/m{\ell})$ were pretreated with $50{\mu}{\ell}$ of saline, $MCR(2g/m{\ell}),\;LCR(2g/m{\ell}),\;GR(g/m{\ell})$ or Sabaiksan itself at room temperature for 30 minutes, and then $50{\mu}{\ell}$ of compound 48/80 solution $(100{\mu}g/m{\ell})$ were added into it. 30 minutes after the addition of compound 48/80 solution, histamine release assay in the supernatant of peritoneal mast cell suspension were performed employing radioisotope enzymatic assay and morphologic changes of mast cells in each regular time point were photographed. Compared with controls, compound 48/80 induced anaphylactic shock was significantly inhibited by MCR and GR pretreatment into the ICR mice. Significant inhibition of compound 48/80 induced cutaneous reaction, mesenteric mast cell degranulation rate in vivo and histamine release from the rat peritoneal mast cells in vitro was observed only in MCR pretreated group. From the above results, it is suggested that MCR component of Sabaiksan may playa key role to suppress mast cell function since it has been applied to various allergic diseases.

• Microbiology and Biotechnology Letters
• /
• v.42 no.4
• /
• pp.347-353
• /
• 2014

${\beta}$-Glucosidase from Aspergillus usamii KCTC 6954 was used to convert ginsenoside Rb1 to compound K, which has a high bio-functional activity. The enzymatic activities during culturing for 15 days were determined using ${\rho}$-nitrophenyl-${\beta}$-glucopyranoside. The growth rate of the strain and the enzymatic activity were maximized after 6 days (IU; $175.93{\mu}M\;ml^{-1}\;min^{-1}$). The activities were maximized at $60^{\circ}C$ in pH 6.0. During culturing, Rb1 was converted to Rd after 9 d and then finally converted to compound K at 15 d. In the enzymatic reaction, Rb1 was converted to the ginsenoside Rd within 1 h of reaction time and compound K could be detected after 8 h. As a result, this study demonstrates that $Rb1{\rightarrow}Rd{\rightarrow}F2{\rightarrow}$compound K is the main metabolic pathway catalyzed by ${\beta}$-glucosidase and that ${\beta}$-glucosidase is a feasible option for the development of specific bioconversion processes to obtain minor ginsenosides such as Rd and compound K.

• East Asian mathematical journal
• /
• v.34 no.1
• /
• pp.59-67
• /
• 2018

We present new recurrence formulas for the raw and central moments of a compound binomial random variable. Our approach involves relating two compound binomial random variables that have parameters with a difference of 1 for the number of trials, but which have the same parameters for the success probability for each trial. As a consequence of our recursions, the raw and central moments of a binomial random variable are obtained in a recursive manner without the use of Stirling numbers.

• Journal of applied mathematics & informatics
• /
• v.26 no.1_2
• /
• pp.191-201
• /
• 2008

In this paper, we consider an insurance risk model governed by a compound Binomial arrival claim process and by a compound Binomial arrival premium process. Some formulas for the probabilities of ruin and the distribution of ruin time are given, we also prove the integral equation of the ultimate ruin probability and obtain the Lundberg inequality by the discrete martingale approach.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.15 no.2
• /
• pp.161-164
• /
• 2007

While searching for ${\alpha}$-glucosidase inhibitors, the active compound was found in a methanol extract of Burthus martensi Kirsch. The separation of the active compound was performed using various chromatography methods and the physico-chemical properties of the purified compound were characterized. The compound showed very potent inhibitory activity against ${\alpha}-glucosidase$ with an $IC_{50}$ value of $5.3\;{\mu}g/ml$. Lineweaver-Burk plot indicated that its inhibition of ${\alpha}-glucosidase$ was competitive.