• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.63-67
• /
• 1999

This paper presents the optimization of CFRP laminated rectangular plates using fuzzy theory. In optimization, thickness of CFRP lamina and fiber angle are taken as design variables, and total thickness of the plates is minimized under Tsai-Hill failure criterion. The uncertainties are entered by introducing fuzzy material strengths and then the objective and constraints are represented by a membership function of their own according to the intersection method. Various design results are presented for the CFRP laminated composites plates.

• Steel and Composite Structures
• /
• v.24 no.5
• /
• pp.537-548
• /
• 2017

In this paper presents bending characteristic of single wall carbon nanotube reinforced functionally graded composite (SWCNTRC-FG) plates. The finite element implementation of bending analysis of laminated composite plate via well-established higher order shear deformation theory (HSDT). A seven degree of freedom and $C^0$ continuity finite element model using eight noded isoperimetric elements is developed for precise computation of deflection and stresses of SWCNTRC plate subjected to sinusoidal transverse load. The finite element implementation is carried out through a finite element code developed in MATLAB. The results obtained by present approach are compared with the results available in the literatures. The effective material properties of the laminated SWCNTRC plate are used by Mori-Tanaka method. Numerical results have been obtained with different parameters, width-to-thickness ratio (a/h), stress distribution profile along thickness direction, different SWCNTRC-FG plate, boundary condition, through the thickness (z/h) ratio, volume fraction of SWCNT.

• Environmental and Resource Economics Review
• /
• v.9 no.3
• /
• pp.461-487
• /
• 2000

Kang et al. (1999) computed a composite environmental index in Korea by practicing the survey for environmental experts. They used the weighted sum form among feasible aggregation forms. In this study, we carry out the survey for both experts and non-experts to see the degree of differences of the weights for nine types of environmental problems between two groups. In addition, we apply different aggregation forms such as linear sum, weighted sum, root-sum-power, root-mean-square forms and compare these four outcomes. We found no significant discrepancy in the trends of composite indices. In case we rely on the weights provided by the experts, the composite index, on average, has been increased annually by about 7.2% over the 1986~1997 period, which informs us that overall environmental quality in 1997 has been worse than in 1986 by about 1.8 times.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.167-172
• /
• 1982

The purpose of this study was to evaluate the marginal sealing ability of "Silar". Using freshly extracted human teeth and 2% acquous methylene blue, the marginal leakage of dye in restorative materials such as Silar, Silar with acid etching technique, Hi-Pol, Hi-Pol Enamel Bond system, Adaptic and Amalgam were investigated at $37^{\circ}C$ and under temperature cycling in range of $4^{\circ}C-60^{\circ}C$. The results as follows; 1. All filling materials showed some degree of marginal penetration by 2% methylene blue dye. 2. Silar with acid etching technique revealed effective marginal sealing ability, but under temperature cycling it showed increased marginal leakage. 3. All composite resins showed greater marginal leakage than amalgam restoration. 4. Silar had the most effective marginal sealing ability in experimented composite resins.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.75-82
• /
• 2000

A huge offshore structures such as immersed tunnel, ice-resisting wall are continuously subjected to large force from water pressure, wave action and impact loads. Composite steel-concrete structure of sandwich system has profitable advantages for a huge offshore structures. This composite structures should exhibit a high degree of strength and ductility, because of concrete confining effect and the property of steel plate. Therefore, it endures large deformation and absorbs a great deal of energy until failure. In this study, nonlinear analysis for composite steel-concrete structure of sandwich system was carried out, and certify the effects of various parameters, elastic·plastic behavior characteristic, load-carrying and failure mechanism.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.53-62
• /
• 1998

A simple analytical and finite element(FE) models are used to study the tensile properties of Al matrix composite with continuous TiNi fibers. The effects of residual stresses caused by the shape momory effects have been compared for various mechanical behaviors as a function of fiber volume fraction and degree of pre-strain and fiber configurations. It is found that both the back stress in the Al matrix induced by stiffness of TiNi fibers and the compressive stress in the matrix are caused of the strengthening mechanisms. Both theoretical and analytical results show quite good agreement and are closed to the experimental data except in high volume content.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.135-142
• /
• 1999

A constitutive model was proposed to study the effects of fiber waviness on the elastic properties of unidirectional composite materials. The predictions showed that the degree of fiber waviness significantly affected the elastic properties of composite materials. A special fabrication technique was developed for thic composite materials with various fiber waviness ratios. Tensile, compressive and flexural tests were conducted to obtain the elastic properties of composite materials with fiber waviness experimentally. The experimental result were in good agreement with the predictions.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1093-1097
• /
• 2020

A composite iodine sorbent was obtained in the form of porous polymer matrix with activated carbon particles impregnated with triethylenediamine deposited on its surface. A comparative assessment of the radioactive methyliodide capturing efficiency by the composite sorbent and a sample of industrial charcoal sorbent was conducted. It was shown that under the selected testing conditions, the hydraulic resistance of the composite sorbent is lower, and the sorption capacity is higher than that of the industrial charcoal sorbent. A method for comparing the effectiveness of iodine sorbents, based on the calculation of the ratio of the sorption capacity index to the minimum capacity index, needed for the required purification degree was proposed.

• Journal of Ceramic Processing Research
• /
• v.21 no.6
• /
• pp.622-631
• /
• 2020

Fly ash is an industry by-product of thermal power factories that is broadly utilized in the concrete industry. This research shows a framework for evaluating the hydration heat, reaction amount, and strength progress of cement-fly ash binary composite. First, we conducted an experiment to study the isothermal hydration heat of fly ash composite paste with assorted fly ash contents and temperatures. According to the experimental outcomes of cumulative hydration heat, the coefficients of a kinetic reaction model of fly ash were determined. Furthermore, the reaction amount of fly ash was calculated using a fly ash reaction model. We discovered that the reaction of fly ash is considerably improved at elevated temperatures. The reaction amount of fly ash decreases with the growing content of fly ash. Second, in line with the reaction amount of fly ash and cement, we developed a straight-line equation for evaluating the strength progress of binary composite. The strength progress model applies to a number of water-to-binder ratios and fly ash substitution ratios. Summarily, the suggested hydration-heat-strength model is helpful for understanding the material style of fly ash concrete.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.59-62
• /
• 2000

In this study, the distribution of the effective modulus was investigated statistically Plain weave structures were modeled with random stacking phase shift angles and the effective modulus was calculated by the unit cell analysis. The analysis results indicated that the effect of random phase shift angles was significant on the modulus distribution. As the number of layers increased, the coefficient of variation decreased and higher degree of homogeneity was attained.