• The Journal of Korean Association of Computer Education
• /
• v.3 no.2
• /
• pp.87-94
• /
• 2000

Software productivity doesn't satisfy the need of service of software users and software quality isn't improved. Moreover, we still have difficulty in software maintenance. As a plan to counteract solving this crisis, the technology that is called CBSE or Componentware is introduced. Componet Based Software Architecture, one of the technologies associated with CBSE, as a structural description of system, describes both the components composed system of and interaction among these components. Software Architecture provides the technology and the methodology of composition among components in the field of CBSE. is accepted one of core technologies. In this thesis, we analyse information necessary for component specification and then proposed that component specificaton activities using formal specification language Z which is verified with the ability of analysis and logicality. The proposed activities are composed of 9 tasks. By presenting specific 11 products, it is also proposed that component specification activities which is the base of CBSD(ComponentBased Software Development) for reusing.

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.3 s.35
• /
• pp.373-389
• /
• 1991

In order to develop the measuring tool of VDT syndrome and investigate the variables affecting the development of VDT syndrome, a questionnaire study accompanied with the evaluation of working environment was performed with 138 VDT users from six public organs in Kwangju area. The results were summarized as follows. 1. As a result of analysis with data collected by newly developed questionnaire, VDT syndrome included five factors named as eye-related component, psychological component, general body component, musculoskeletal component, and skin-related component and the estimates of the internal consistency of five factors were 0.877, 0.820, 0.796, 0.791, 0.593 respectively. 2. Variables affecting the level of eye-related symptoms were the type of main b using VDT, the total time of VDT operation per day, and the use of external filter on CRT. 3. The level of eye-related symptoms in the group using external filter was higher significantly than that in the group not using filter. 4. The past history of severe illness affected the level of psychological symptoms significantly. 5. Variables affecting the level of general body symptoms were b satisfaction and income satisfaction. 6. Variables affecting the level of musculoskeletal symptoms were the type of main job using VDT, whether majored in EDPS, the level of typewriting, b satisfaction, and the total time of VDT operation per day. 7. Age and the use of external filter were significantly related to the level of skin-related symptoms.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.1 s.3
• /
• pp.57-62
• /
• 2000

Open GIS Consortium(OGC) provides with Simple Features Specification for OLE/COM which is a system object technology of interoperability and reusable capability. In this research, the Spatial Reference System(SRS) component is developed based on the OGC specification using ATL. The component presents 44 map projections and transformations between different geographic coordinate systems utilizing the seven parameter(Bursa Wolf) and Molodenski's methods, a user can set up all objects and its attributes comprising SRS and can create SRS and save its setting using predefined text, WellKnownText. The Spatial Reference System component can be easily implemented into the variety of GIS software so that it reduces the developing time for a system and defines new reference system without difficulty.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1973-1980
• /
• 2015

The combat system has a different purpose depending on its mission. All functions of combat system are important, but, the components that related main functions for the purpose, are important than other components. Also, the hit probability of component is proportional to area of the component. Therefore, when we analyze vulnerability of combat system, to consider the importance and hit probability of component. Thus to improve reliability of combat system, we apply the analyzed result to design combat system. In this paper, we develop a vulnerability analysis program based on criticality which calculated from importance and hit probability of components by related researches. To do this, we propose a methodology to apply criticality of components, and define classification rates for calculating criticality based on FMECA. Additionally, we propose a technique of vulnerability analysis using criticality of components, and apply the proposed technique to develop and test the vulnerability analysis program for automation of analysis.

• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.371-376
• /
• 2016

A self-powered piezoelectric energy harvester was developed for the application in wireless sensor node. The energy harvester was evaluated with power generation characteristics for the wireless sensor node for structural diagnosis of the electric power system. The self-powered wireless sensor node was set to measure temperature, vibration frequency of the electric power system. A piezoelectric harvester composed of 7 uni-morph cantilevers (functionalized as 6 generators and 1 vibration sensor) was connected to be an array and revealed to produce significantly high output power of approximately 10 mW at 120 Hz under 3.4 g((1 g = $9.8m/sec^2$). The wireless sensor node could work as the electric power generated by the developed piezoelectric harvester.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.80-84
• /
• 2015

Softness is considered one of the most important attributes of hygiene paper such as tissue and towel. Being subjective in nature, however, softness attribute has been generally believed to be impossible to evaluate using objective methods. Hallmark in his pioneering work proposed that tissue subjective softness should be mainly consisted of the bulk softness component and surface softness component. The bulk softness component can be determined by tensile stiffness; the surface softness component by surface tester. The surface friction turns out far more important than the surface roughness in determining the surface softness component. It cannot be too much emphasized that both results of the tensile stiffness and the surface friction should depend on measuring conditions such as an instrument used, sample sizes (e.g., basis weight, length, and width) and operating conditions of the instrument (e.g., gauge length, cross-head speed, size of stylus, and its scanning speed). This indicates that a direct comparison of the test results would be impossible or misleading unless they have been tested under the identical conditions. This may explain why the standard objective test method for tissue softness has not been available at present.

• Journal of the Korea Society for Simulation
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2013

Modeling and simulation techniques construct experimental environment considering battlefields and are able to analyze performance of components of weapon system that closely resemble reality. However, developed model has low scalability and not cared reusability because it has been used only in a limited range of domain. In this paper, we develop a verification tool to verify reusability of developed component for dynamic reconfiguration and to judge scalability of it and a management tool to control data of it effectively. In addition, dynamic reconfiguration architecture of guided weapon systems designed in the previous study has been applied to SAM(Surface to Air Missile) System Simulator, and we study effectiveness of the developed component. Thus the user can configure various guided weapon systems through simulation application of dynamic reconfiguration architecture of component.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.314-321
• /
• 2020

Logic automated stimulus and response (LASAR) software is an automatic test program development tool for logic function test and fault detection of avionics components digital circuit cards. LASAR software needs to the information for the logic circuit function and input and output of the device. If there is no component information, normal component modeling is impossible. In this paper, component modeling is carried out through reverse design of programmable logic device (PLD) device without element information. The developed LASAR program identified failure detection rates through fault simulation results and single-seated fault insertion methods. Fault detection rates have risen by 3% to 91% for existing limited modeling and 94% for modeling through the reverse design. Also, the 22 case of stuck fault with the I/O pin of EP310 PLD were detected 100% to confirm the good performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.349-358
• /
• 2019

This paper aimed at collecting sensor signals to extract characteristic parameter of the rotor. A vibration test rig has been developed to perform model tests. Signal characteristics were analyzed when driving normally. Envelope FFT Analysis is used to extract vibration components caused by periodic impacts from other vibration factors. Signal analysis was performed when load changes were given to speed sensors and vibration test rigs that show low frequency characteristics of the rotor and signal analysis according to rotational speed. The acceleration signal measured in the bearing housing has a small amplitude and produces only the rotational frequency component and harmonic component of the motor. As the number of rotations increases, the amplitude of acceleration can be seen. As the rotational speed increases, it can be seen that there is a difference in the shape of the original data and compared with the acceleration FFT graph, it can be seen that the noise is strong at low frequencies and the corresponding rotational frequency components are clearly represented. It can be seen that changing the load does not increase the main rotational frequency component.

• Steel and Composite Structures
• /
• v.43 no.3
• /
• pp.327-340
• /
• 2022

A vast amount of experimental and analytical research has been conducted related to the seismic behavior and performance of concrete filled steel tubular (CFT) columns. This research has resulted in a wealth of information on the component behavior. However, analytical and experimental data for structural systems with CFT columns is limited, and the well-known behavior of steel or concrete structures is assumed valid for designing these systems. This paper presents the development of an analytical model for nonlinear analysis of composite moment resisting frame (CFT-MRF) systems with CFT columns and steel wide-flange (WF) beams under seismic loading. The model integrates component models for steel WF beams, CFT columns, connections between CFT columns and WF beams, and CFT panel zones. These component models account for nonlinear behavior due to steel yielding and local buckling in the beams and columns, concrete cracking and crushing in the columns, and yielding of panel zones and connections. Component tests were used to validate the component models. The model for a CFT-MRF considers second order geometric effects from the gravity load bearing system using a lean-on column. The experimental results from the testing of a four-story CFT-MRF test structure are used as a benchmark to validate the modeling procedure. An analytical model of the test structure was created using the modeling procedure and imposed-displacement analyses were used to reproduce the tests with the analytical model of the test structure. Good agreement was found at the global and local level. The model reproduced reasonably well the story shear-story drift response as well as the column, beam and connection moment-rotation response, but overpredicted the inelastic deformation of the panel zone.