• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.238-244
• /
• 2001

A method of estimating the fluid drag of a fishing gear and otter board spread in a midwater trawl on full scale was described by implementing a three-dimensional semi-analytic treatment of the towing cable (warp) of a trawl system with the field experiments obtained with the SCANMAR system. The shape of hand rope, bridle and float(or ground) rope attached behind otter boards in a horizontal plane was assumed to be of form $y_r=Ax_r^B$. The distance between otter boards (otter board spread) obtained by the three dimensional analysis of a towing cable must be equal to that obtained by the functional equation of the shape of ropes behind otter boards, The angle of attack of ropes which can be obtained from the functional equation enables one to estimate the fluid drag of trawl net (net drag) by subtracting the fluid drag of the hand rope and bridles from the drag component of the tension of hand rope attached just behind the otter boards.

• Korean Journal of Food Science and Technology
• /
• v.37 no.1
• /
• pp.73-77
• /
• 2005

Contents of isoflavone, phenolic acids, tocopherol, and anthocyanin in black soybean (Glycine max) were measured by HPLC. To compare antioxidative activities of main black soybean components, antioxidative effects of the same levels of commercial standard components were measured by Trolox equivalent antioxidant capacity assay (TEAC). Most effective component was gentisic acid followed by anthocyanin, p-coumaric acid, ferulic acid, genistein, syringic acid, and daidzein. TEAC assay results revealed genistein in isoflavone, gentisic acid in phenolic acids, p-tocopherol in tocopherol, and anthocyanin showed highest antioxidative and synergistic acitivities, with anthocyanin showing strongest synergy effect.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.29-34
• /
• 2003

In development of the processed food, it is important not only to make the food delicious but to enhance its storage span and thermal stability without change in color, which greatly affects the tastes. Protopectinase (PPase) from Bacillus subtilis EK11 hydrolyses or dissolves protopectin in the middle lamella of plant tissues with the resultant separation of plant cells from each other, called enzymatic maceration. With the PPase, persimmon was enzymatically macerated to separate cells to primary cell wall without damage. Recovery rates of persimmon treated with PPase and mechanical maceration were 95% and 85%, respectively. Total and reducing sugars, crude protein and fat in the enzymatic maceration were well preserved as in the mechanical maceration. Importantly, over 50% of vitamin C, which is the most unstable component during the mechanical maceration, remained with an intact form for one day after the enzymatic treatment. When the suspensions of persimmon macerated with both treatments were stored at 4$^{\circ}C$ for 9 days, the mechanically macerated persimmon suspension was decolorized, whereas decolorization, was not found in the enzymatically macerated persimmon suspension. Moreover the mechanically macerated persimmon was greatly deteriorated after heat treatment at 10$0^{\circ}C$ for 60 min, whereas cells of the enzymatically separated persimmon suspension appeared to be stable, indicating increased thermal stability Thus, the PPase treatment of persimmon could be a better choice for preparation of highly valuable and functional processed food as well as for increase in preservation period.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.340-350
• /
• 2020

This study was conducted to present comprehensive professionalism measurement tools suitable for hospital administration staffs. The study used measurement tools related to the psychological and behavioral characteristics of individuals used in prior studies for administration staffs at general hospitals and hospitals. Factor analysis and reliability analysis were conducted to verify the validity and internal relevance. As a result of the analysis, it was concluded that composed of 5 factors, and that the total reliability was 94.4%, which was very reasonable as a comprehensive professionalism measurement tool. Therefore, each component was defined as Confidence of Job performance, Salary Adequacy, Pride in Duties, Ability to achieve work goals, and Work Autonomy in order to provide a clear meaning. Professionalism from a modern perspective is a broader concept than traditional professionalism, including the subjective perceptions of job values and individuals' their abilities. Therefore, comprehensive professionalism measurement tools presented in this study will be very suitable and useful for hospital administration staffs.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.29 no.1
• /
• pp.369-391
• /
• 2018

The purpose of this study was to develop a measurement scheme that assesses organizational performances in library department unit level by applying PCSI model, a Public-service Customer Satisfaction Index. Specifically, this study adopted the Antecedent Model, a component of the PCSI's three-part model, that consists of a total of 12 service quality indices. The study selected a large-scale library as a case to analyze and design a method. We analyzed the library's organizational missions and goals set by each of its six departments, and then mapped them with each of the 12 service quality indices. This mapping was further developed as a work analysis scheme of the library and as a measurement tool. A total of 341 library users participated in a survey that was designed to assess 12 service quality indices. As a result service quality was measured for each index, which in turn, calculated the library's service performance index for both entire and individual units of the library. The results reveled the measurement tool useful in assessing service performances for both individual unit and the entire library.

• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.129-140
• /
• 2017

Global solar radiation was calculated in this research using ground-base measurement data, meteorological satellite data, and GWNU (Gangneung-Wonju National University) solar radiation model. We also analyzed the accuracy of the GWNU model by comparing the observed solar radiation according to the total cloud cover. Our research was based on the global solar radiation of the GWNU radiation site in 2012, observation data such as temperature and pressure, humidity, aerosol, total ozone amount data from the Ozone Monitoring Instrument (OMI) sensor, and Skyview data used for evaluation of cloud mask and total cloud cover. On a clear day when the total cloud cover was 0 tenth, the calculated global solar radiations using the GWNU model had a high correlation coefficient of 0.98 compared with the observed solar radiation, but root mean square error (RMSE) was relatively high, i.e., $36.62Wm^{-2}$. The Skyview equipment was unable to determine the meteorological condition such as thin clouds, mist, and haze. On a cloudy day, regression equations were used for the radiation model to correct the effect of clouds. The correlation coefficient was 0.92, but the RMSE was high, i.e., $99.50Wm^{-2}$. For more accurate analysis, additional analysis of various elements including shielding of the direct radiation component and cloud optical thickness is required. The results of this study can be useful in the area where the global solar radiation is not observed by calculating the global solar radiation per minute or time.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.252-260
• /
• 2015

The aim of this research is providing the fundamental data for treating and recycling the byproducts by using the wet processed bottom ash as a fine aggregate replacement for cement-based extruded panel. Although the cement-based extruded panel was used mainly as a cladding component with its high strength and outstanding durability, it was hardly spread because of low economic feasibility due to the high cost of additives or fibers which were used to achieve 14 MPa of flexural strength as a cladding material. As a solution of this drawback, by the previous research, it was possible to replace cement by fly ash up to 80 % by decreasing quality criteria with restricting the application to indoor purpose. In this research, based on the previous research, by using the bottom ash as a replacement of fly ash, improvement of shape retention performance is tried. As a result of the experiment on evaluating the optimum content and PSD of bottom ash, as the fineness modulus and content of bottom ash was increased, the extruding performance was decreased and penetration resistance was increased. Additionally, the optimum content and the maximum particle size was found as 20 %, and 0.3 mm, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1475-1483
• /
• 2006

This study was carried out to examine the optimum processing conditions of seasoned semi-dried oyster, and to investigate its food component characteristics. Three types of semi-dried oyster were prepared: semi-dried oyster prepared without seasoning and coating (C), seasoned semi-dried oyster without coating (S) and seasoned semi-dried oyster coated with alginate (SA). SA was high in moisture (48.6%), while low in lipid (2.8%), and crude protein (25.9%) compared to those of C and S. Hardness and sensory scores of SA were $209.8g/cm^2$ and $3.9\sim4.5$ points, respectively. Total amino acid content (24,299 mg/100 g) of SA was lower than that (27,181 mg/100 g) of C, and the major amino acids were aspartic acid, glutamic acid, leucine and Lysine. The major fatty acids of SA were 16:0 (25.5%) as saturates and EPA (23.5%) and DHA (9.3%) as polyenes. Calcium and phosphorus contents of SA were 42.6 mg/100 g and 245.5 mg/100 g, respectively.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.173-193
• /
• 2010

The World Wide Web is transitioning from being a mere collection of documents that contain useful information toward providing a collection of services that perform useful tasks. The emerging Web service technology has been envisioned as the next technological wave and is expected to play an important role in this recent transformation of the Web. By providing interoperable interface standards for application-to-application communication, Web services can be combined with component-based software development to promote application interaction and integration within and across enterprises. To make Web services for service-oriented computing operational, it is important that Web services repositories not only be well-structured but also provide efficient tools for an environment supporting reusable software components for both service providers and consumers. As the potential of Web services for service-oriented computing is becoming widely recognized, the demand for an integrated framework that facilitates service discovery and publishing is concomitantly growing. In our research, we propose a framework that facilitates Web service discovery and publishing by combining clustering techniques and leveraging the semantics of the XML-based service specification in WSDL files. We believe that this is one of the first attempts at applying unsupervised artificial neural network-based machine-learning techniques in the Web service domain. We have developed a Web service discovery tool based on the proposed approach using an unsupervised artificial neural network and empirically evaluated the proposed approach and tool using real Web service descriptions drawn from operational Web services repositories. We believe that both service providers and consumers in a service-oriented computing environment can benefit from our Web service discovery approach.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.97-102
• /
• 2003

Wire ropes are used in a myriad of various industrial applications such as elevator, mine hoist, construction machinery, lift, and suspension bridge. Especially, the wire rope of crane is important component to container transfer. If it happens wire rope failures during the operation, it may lead to safety accident, economic loss by productivity decline and so on. To solve this problem, we developed remote wire rope fault detecting system, and this system is consisted of 3 parts that portable fault detecting part, signal processing part and remote monitoring part. All detected signal has external noise or disturbance according to circumstances. So, we applied to discrete wavelet transform to extract a signal from noisy data. It is verified that the detecting system by de-noising has good efficiency for inspecting faults of wire ropes in service. As a result, by developing this system, container terminal could reduce expense because of extension fo wire ropes exchange period and could competitive power. Also, this system is possible to apply in several field such as elevator, lift and so on.