• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.122-127
• /
• 1998

Conductivities of polycrystalline ceria doped with several rare earth oxides were measured by AC admittance and DC four probe method. The conductions were separated into grain and grain boundary contributions using the complex admittance technique as well as grain size dependence of conductivity. The grain size dependence of polycrystalline conductivity, which can be adequately described by the so-called brick layer model, appears to give a more reliable measure of the grain conductivity compared to the complex admittance method. Polycrystalline resistivity(1/conductivity) increases linearly with the reciprocal of grain size. The intercept of resistivity vs. inverse grain size plot gives a measure of the grain resistivity and the slope gives a measure of the grain boundary resistivity. It was also noted that errors involved in the analysis of experimental data may be different between the complex admittance method and the impedance method. A greater resolution of the spectra was found in the complex admittance method, insofar as the present work is concerned, suggesting that the commonly used equivalent circuit may require re-evaluation.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.318-321
• /
• 2019

겉보기대지저항률은 층의 깊이와 대지저항률과 같은 다층 대지파라미터들을 추정하는 데 사용된다. 겉보기대지저항률은 측정 될 수 있으며, 또한 겉보기대지저항률은 이들 파라미터들의 함수이기 때문에 주어진 대지 파라미터들로 계산 될 수 있다. 따라서 모든 최적화 알고리즘을 사용하여 계산된 겉보기대지저항률을 측정된 대지저항률에 가깝게 만드는 이들 파라미터들을 찾을 수 있다. 겉보기대지저항률을 계산하기위한 방정식은 0 차 Bessel함수를 포함하는 무한 적분으로 구성되어 있기 때문에 복잡하고 시간 소모적이다. 본 논문에서는 수평 다층 구조의 겉보기대지저항률을 계산하기 위한 빠른 알고리즘이 복소수이미지 방법을 사용하여 제시되었다.

• 산업기술연구
• /
• 제27권B호
• /
• pp.115-119
• /
• 2007

Currently, geophysical method is applied for understanding the subsurface geologic structure economically and systematically, but there exists some limitations on recognizing complex subsurface structures precisely by a single geophysical method. In order to understand the complex subsurface structures, we applied various geophysical methods including seismic refraction survey, two-dimensional resistivity survey, seismic tomography survey, suspension-ps log, and understood distribution of low velocity, low resistivity range of resistivity survey and correlation of an intersecting point, velocity distribution of seismic tomography survey.

• 대한금속재료학회지
• /
• 제49권12호
• /
• pp.917-923
• /
• 2011

Dissolution and precipitation behaviors of complex carbonitrides in austenite of a V-Nb microalloyed steel were quantitatively examined through electrical resistivity measurement and transmission electron microscopy. The electrical resistivity increased with solution treatment temperature up to $1240^{\circ}C$ and then was saturated at $225n{\Omega}m$ for a holding time of 10 min. The electrical resistivity method was also used to quantitatively measure the isothermal precipitation kinetics of the complex carbonitrides in austenite. Nb-rich precipitates were observed in austenite at the early stages of precipitation, but Nb was replaced by V up to the equilibrium amount within the precipitates with further holding time. The time-temperature-precipitation diagram showed a C-type curve; nose temperature and its incubation time were $900^{\circ}C$ and 100 s, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.578-582
• /
• 1994

In this paper reconstructing the internal resistivity and relative permittivity distribution is discussed. The iterative reconstruction method based on Finite Element method and Newton method were used to reconstruct both of resistivity ind permittivity distribution. The Finite Element model of impedance distribution is built in complex field of resistivity and capacitive medium. The reconstruction results based on computer simulated data and experimental data are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.215-220
• /
• 1990

A.C. impedance properties of $RuO_2$ based thick film resistors which having different resistivity value (DuPont 1721 : $100{\Omega}$/ sq., 1741 : $10K{\Omega}$/sq.) were investigated using by impedance analyzer. In case of lower resistivity 1721 system, the complex impedance was composed nearly R component for all speciman sintered at above $600^{\circ}C$, and the frequency dependancy on impedance was not affected very much up to 5MHz and again gradually increase with increasing the frequency. In case of higher resistivity 1741 resistor system, impedance properties were very depandant on sintering temperature. When sintering temperature was $600^{\circ}C$, the complex impedance plot shows a vertical line, which correspond to lone capacitance equivalant circuit, and the impedance linearly decreased with increasing frequency. In case of speciman sintered at $700-900^{\circ}C$, the complex impedance plot shows semi-circular are correspond to a lumped RC combination, and the impedance shows constant value to 5MHz, again decreased with increasing frequency. But the complex impedance behavior of speciman sintered at $1000^{\circ}C$ was shows the equivalent circuit correspont to parallel combined LCR component, and the impedance was not varied with frequency.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.185-196
• /
• 1999

실내실험에 의하여 사질토 간극수의 이온 성분들사이 관계를 규명하기 위하여 흙의 비저항측정 상자와 STING-Rl비저항 측정기를 이용하여 분석을 수행하였다. 실험은 이온성분들의 농도를 변화시키면서 실시하였다. 또한 2~3가지 성분을 혼합한 경우에 대해서도 비저항값의 변화를 측정하였다. 실험결과는 성분중에서 비소(As)의 비저항값의 감소가 가장 컸으며, 나머지 성분들은 일반성분들과 큰 차이를 보이지는 않았다. 또한 혼합성분의 경우에는 비저항값의 범위가 간극수에 포함된 성분들의 비저항값에 따라 달라지는 것으로 나타났다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2008년도 공동학술대회
• /
• pp.119-124
• /
• 2008

복소 전기비저항법은 지반내 미세 IP 효과를 측정할 수 있는 장비와 해석 기술의 발전으로 인해 그 응용분야를 넓혀가고 있는 방법이다. 이 연구에서는 복소전기비저항법을 시멘트 모르탈의 주입을 통해 지반보강을 수행하였던 전라남도 무안군 용월리에 위치한 시험조사 지역에 적용하여, 그라우팅으로 인한 지반변화를 확인해보기 위한 목적으로 수행되었다. 동일한 측선에 대하여 지반보강이 실시되는 동안 전기비저항 모니터링 및 토모그래피 탐사가 수행되었으며, 이 결과는 복소전기비저항 해석 결과와 비교하였다. 탐사결과 그라우팅 진행과 관련하여 수행한 전기비저항 모니터링자료의 4차원 역산해석 결과와 복소 전기비저항법의 위상단면의 이상대가 동일한 위치에서 확인되었다. 이는 시멘트 모르탈에 기인한 IP 효과가 위상 단면상에서 나타나는 것으로, 이는 그라우팅으로 인한 지반보강 조사의 목적으로 복소전기비저항 탐사가 효과적으로 적용될 수 있음을 보여준다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권2호
• /
• pp.76-82
• /
• 2002

This paper presents the method of sail-resistivity estimation using the backpropagation(BP) neural network. Existing estimation programs are expensive, and their estimation methods need complex techniques and take much time. Also, those programs have not become well spreaded in Korea yet. Soil resistivity estimation method using BP algorithm has studied for the reason mentioned above. This paper suggests the method which differs from expensive program or graphic technology requiring many input stages, complicated calculation and professional knowledge. The equivalent earth resistivity can be presented immediately after inputting apparent resistivity through the personal computer with a simplified Program without many Processing stages. This program has the advantages of reasonable accuracy, rapid processing time and confident of anti users.

• 열처리공학회지
• /
• 제21권6호
• /
• pp.287-292
• /
• 2008

Dissolution behavior of complex carbonitrides in a Nb-Ti-V microalloyed steel was quantitatively examined by electrical resistivity, transmission electron microscopy (TEM), and optical microscopy. The electrical resistivity increased with solution treatment temperature up to $1250^{\circ}C$ for a holding time of 15 min. But, an increasing rate of electrical resistivity with temperature was obviously decreased above $1150^{\circ}C$. As the solution treatment temperature increases, irregular shaped Nb-rich carbonitrides disappear and cuboidal Ti-rich carbonitrides are observed. Abnormal grain growth occurs above $1250^{\circ}C$ for a holding time of 15 min. The optimal solution treatment temperature of a Nb-Ti-V microalloyed steel was determined as $1200^{\circ}C$ for a holding time of 15 min.