• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.17-22
• /
• 2012

This paper presents analyzed results of a permanent magnet motor by using complex E&S modeling. The calculated results are compared with ones from the conventional E&S modeling for verification. Combinations of the numbers of slots and poles are investigated to reduce total iron loss. The results demonstrate that the complex E&S modeling is very useful in design under consideration of rotational magnetic field and magnetic anisotropy.

• 한국전산응용수학회:학술대회논문집
• /
• 한국전산응용수학회 2003년도 KSCAM 학술발표회 프로그램 및 초록집
• /
• pp.1-1
• /
• 2003

In this talk, a reduced-order modeling methodology based on centroidal Voronoi tessellations (CVT's)is introduced. CVT's are special Voronoi tessellations for which the generators of the Voronoi diagram are also the centers of mass (means) of the corresponding Voronoi cells. The discrete data sets, CVT's are closely related to the h-means clustering techniques. Even with the use of good mesh generators, discretization schemes, and solution algorithms, the computational simulation of complex, turbulent, or chaotic systems still remains a formidable endeavor. For example, typical finite element codes may require many thousands of degrees of freedom for the accurate simulation of fluid flows. The situation is even worse for optimization problems for which multiple solutions of the complex state system are usually required or in feedback control problems for which real-time solutions of the complex state system are needed. There hava been many studies devoted to the development, testing, and use of reduced-order models for complex systems such as unsteady fluid flows. The types of reduced-ordered models that we study are those attempt to determine accurate approximate solutions of a complex system using very few degrees of freedom. To do so, such models have to use basis functions that are in some way intimately connected to the problem being approximated. Once a very low-dimensional reduced basis has been determined, one can employ it to solve the complex system by applying, e.g., a Galerkin method. In general, reduced bases are globally supported so that the discrete systems are dense; however, if the reduced basis is of very low dimension, one does not care about the lack of sparsity in the discrete system. A discussion of reduced-ordering modeling for complex systems such as fluid flows is given to provide a context for the application of reduced-order bases. Then, detailed descriptions of CVT-based reduced-order bases and how they can be constructed of complex systems are given. Subsequently, some concrete incompressible flow examples are used to illustrate the construction and use of CVT-based reduced-order bases. The CVT-based reduced-order modeling methodology is shown to be effective for these examples and is also shown to be inexpensive to apply compared to other reduced-order methods.

• International Journal of Computer Science & Network Security
• /
• 제23권5호
• /
• pp.21-32
• /
• 2023

The design of complex man-made systems mostly involves a conceptual modeling phase; therefore, it is important to ensure an appropriate analysis method for these models. A key concept for such analysis is the development of a diagramming technique (e.g., UML) because diagrams can describe entities and processes and emphasize important aspects of the systems being described. The analysis also includes an examination of ontological concepts such as states and events, which are used as a basis for the modeling process. Studying fundamental concepts allows us to understand more deeply the relationship between these concepts and modeling frameworks. In this paper, we critically analyze the classic definition of a state utilizing the Thinging machine (TM) model. States in state machine diagrams are considered the appropriate basis for modeling system behavioral aspects. Despite its wide application in hardware design, the integration of a state machine model into a software system's modeling requirements increased the difficulty of graphical representation (e.g., integration between structural and behavioral diagrams). To understand such a problem, in this paper, we project (create an equivalent representation of) states in TM machines. As a case study, we re-modeled a state machine of an assembly line system in a TM. Additionally, we added possible triggers (transitions) of the given states to the TM representation. The outcome is a complicated picture of assembly line behavior. Therefore, as an alternative solution, we re-modeled the assembly line based solely on the TM. This new model presents a clear contrast between state-based modeling of assembly line behavior and the TM approach. The TM modeling seems more systematic than its counterpart, the state machine, and its notions are well defined. In a TM, states are just compound events. A model of a more complex system than the one in the assembly line has strengthened such a conclusion.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.3-8
• /
• 2001

Regarding current rapid innovations and applications of information and telecommunication technologies as well as economical requirements, modeling and simulation (M&S) plays an increasingly important role for the planning, development and operation of high-tech products and systems. M&S has to seen as a key technology for multi-facetted analysis of complex systems during their life-cycles. For reasons as accuracy, credibility and cost-effectiveness, the selection of adequate and effective M&S techniques and tools is of significant importance. Regarding these aspects, this paper summarizes the basic methodological modeling approach for effective product and system modeling. In addition, besides a classification of different basic architectures and taxonomies combining knowledge-processing and simulation techniques, the paper describes some practical implementations and experiences.

• The Journal of the Acoustical Society of Korea
• /
• 제17권1E호
• /
• pp.36-43
• /
• 1998

A fuzzy logic filter is constructed from a set of fuzzy IF-THEN rules which change adaptively to minimize some criterion function as new information becomes available. This paper generalizes the fuzzy logic filter and it's adaptive filtering algorithm to include complex parameters and complex signals. Using the complex Stone-Weierstrass theorem, we prove that linear combinations of the fuzzy basis functions are capable of uniformly approximating and complex continuous function on a compact set to arbitrary accuracy. Based on the fuzzy basis function representations, a complex orthogonal least-squares (COLS) learning algorithm is developed for designing fuzzy systems based on given input-output pairs. Also, we propose an adaptive algorithm based on LMS which adjust simultaneously filter parameters and the parameter of the membership function which characterize the fuzzy concepts in the IF-THEN rules. The modeling of a nonlinear communications channel based on a complex fuzzy is used to demonstrate the effectiveness of these algorithm.

• 동력기계공학회지
• /
• 제5권4호
• /
• pp.53-60
• /
• 2001

This paper considers a modeling for the MIMO magnetic bearing system. The rotor is flexible and has a complex shape. To obtain the nominal plant transfer functions, we perform a numerical analysis by using the finite element method(F.E.M.) for the rotor's dynamics, and make a nominal model by reducing the modes from the results. And, we have experimented on the frequency response by a closed-loop identification method, and compared it with the simulation's result on the closed-loop control system.

• 한국시뮬레이션학회논문지
• /
• 제9권4호
• /
• pp.41-50
• /
• 2000

We have many simulation constraints to meet as a modeled system becomes large and complex. Real-time simulations are the examples in that they are constrained by certain non-function constraints (e.g., timing constraints). In this paper, an enhanced hierarchical modeling methodology is proposed to efficiently deal with constraint-simulations. The proposed modeling method enhances hierarchical modeling methods to provide multi-resolution model. A simulation model is composed by determining the optimal level of abstraction that is guaranteed to meet the given simulation constraints. Four modeling activities are defined in the proposed method: 1) Perform the logical architectural design activity to produce a multi-resolution model, 2) Organize abstraction information of the multi-resolution model with AT (Abstraction Tree) structure, 3) Formulate the given constraints based on U (Integer Programming) approach and embrace the constraints to AT, and 4) Compose a model based on the determined level of abstraction with which the multi-resolution model can satisfy all given simulation constraints. By systematically handling simulation constraints while minimizing the modeler's interventions, we provide an efficient modeling environment for constraint-simulations.

• Computers and Concrete
• /
• 제16권5호
• /
• pp.741-757
• /
• 2015

In the last decade, several modeling approaches have been proposed and applied to estimate the high-performance concrete (HPC) slump flow. While HPC is a highly complex material, modeling its behavior is a very difficult issue. Thus, the selection and application of proper modeling methods remain therefore a crucial task. Like many other applications, HPC slump flow prediction suffers from noise which negatively affects the prediction accuracy and increases the variance. In the recent years, ensemble learning methods have introduced to optimize the prediction accuracy and reduce the prediction error. This study investigates the potential usage of bagging (Bag), which is among the most popular ensemble learning methods, in building ensemble models. Four well-known artificial intelligence models (i.e., classification and regression trees CART, support vector machines SVM, multilayer perceptron MLP and radial basis function neural networks RBF) are deployed as base learner. As a result of this study, bagging ensemble models (i.e., Bag-SVM, Bag-RT, Bag-MLP and Bag-RBF) are found superior to their base learners (i.e., SVM, CART, MLP and RBF) and bagging could noticeable optimize prediction accuracy and reduce the prediction error of proposed predictive models.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.792-799
• /
• 2003

As eTransformation and collaborative eCommerce have been on the rise, business processes between business partners are increasingly recognized as important assets that need to be integrated. These trends imply more complex and dynamic business processes should be considered in order to integrate related business organizations and business units. Moreover, these business processes are widely distributed across stakeholders. Therefore, there is a need for business process modeling that is usable, flexible and capable of integrating systems consistently across businesses and technology barriers. In this paper, a business process modeling methodology is introduced, which is based on top­do\W and model-driven approach utilizing OMG's MDA(Model-Driven Architecture) and UML profile for EDOC(Enterprise Distributed Object Computing). This provides the ability to model business process at all levels simultaneously, to combine business process models retaining their meaning, to use business process design patterns constraining the behavior of sub-processes, and to derive specific codes from a stable model as the underlying infrastructure shifts over time. In addition, we suggest some modifications of the meta-model for EDOC-Business Process Profile by adding new features in order to model business processes rigidly. This paper illustrates some examples of business process modeling and compares them with UML diagrams and IDEF models. The proposed methodology is implemented to develop a business process modeling tool.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2003년도 제2차 연례학술대회 발표논문집
• /
• pp.147-154
• /
• 2003

Microarray information system is a complex system to manage, analyze and interpretate microarray gene expression data. Establishment of well-defined development process is very essential for understanding the complexity and organization of the system. We performed object-oriented analysis using Unified Modeling Language (UML) in specifying, visualizing and documenting microarray information system. The object-oriented analysis consists of three major steps: (i) use case modeling to describe various functionalities from the user's perspective (ii) dynamic modeling to illustrate behavioral aspects of the system (iii) object modeling to represent structural aspects of the system. As a result of our modeling activities we provide the UML diagrams showing various views of the microarray information system. We believe that the object-oriented analysis ensures effective documentations and communication of information system requirements. Another useful feature of object-oriented technique is structural continuity to standard microarray data model MAGE-OM (Microarray Gene Expression Object Model). The proposed modeling e(forts can be applicable for integration of biomedical information system.