[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.11142/jicems.2012.1.1.017

Magnetic Characteristic Analysis of Permanent Magnet Motor with Complex E&S Modeling

Zeze, Shingo (Dept. of Electrical and Electronic Engineering, Oita University)
Todaka, Takashi (Dept. of Electrical and Electronic Engineering, Oita University)
Enokizono, Masato (Dept. of Electrical and Electronic Engineering, Oita University)

Publication Information

Journal of international Conference on Electrical Machines and Systems / v.1, no.1, 2012 , pp. 17-22 More about this Journal

Abstract

This paper presents analyzed results of a permanent magnet motor by using complex E&S modeling. The calculated results are compared with ones from the conventional E&S modeling for verification. Combinations of the numbers of slots and poles are investigated to reduce total iron loss. The results demonstrate that the complex E&S modeling is very useful in design under consideration of rotational magnetic field and magnetic anisotropy.

Keywords

Complex E&S Modeling; Vector Magnetic Properties; $j{\omega}$ Method; PM Motor; Finite Element Method;

Citations & Related Records

Reference

1	Y. Maeda, T. Todaka, H. Simoji, M. Enokizono and J. Sievert, "An evaluation method of cross-type H-coil angle for accurate two-dimensional vector magnetic measurement", Journal of Magnetism and Magnetic Materials, Vol. 304, Issue 2, pp.564-567, September 2006. DOI ScienceOn
2	Kohsaka.T, Takahashi.N, Nogawa.S, Kuwata.M : "Analysis of magnetic characteristics of three-phase reactor made of grain-oriented silicon steel", IEEE Trans. Magn., Vol.36, No.4, p.1894-1897 (2000) DOI ScienceOn
3	Nakano.M, Nishimoto.H, Fujiwara.K, Takahashi.N : "Improvements of single sheet testers for measurement of 2- D magnetic properties up to high flux density", IEEE Trans. Magn., Vol.35, No.5, p.3965-3967 (1999) DOI ScienceOn
4	Mori.K, Yanase.S, Okazaki.Y, Hashi.S. : "2-D magnetic rotational loss of electrical steel at high magnetic flux density", IEEE Trans. Magn., Vol.41, No.10, p.3310-3312 (2005) DOI ScienceOn
5	T. Todaka, K.Nakanoue and M.Enokizono, "Magnetic field analysis under complex approximation taking account of two-dimensional magnetic properties", The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 28, No. 1, pp. 98-108, 2009. DOI ScienceOn
6	N. Soda and M. Enokizono, "Improvement of T-joint part constructions in three-phase transformer cores by using direct loss analysis with E&S model," IEEE Trans. Magn., vol.MAG-36, pp. 1724-1727, July 2000.
7	M. Enokizono and N. Soda, "Direct magnetic loss analysis by FEM considering vector magnetic properties," IEEE Trans. Magn., vol.34, pp. 188-195, Sept. 1998.