• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.876-878
• /
• 2008

The standards of acceptable limit and compensation is one of the most important things in environmental noise and vibration disputes resolution. In this paper, review on the present acceptable limit level and compensation standard in National Environmental Dispute Resolution Commission is introduced. Discordance of standards between in the regulation law and in the dispute resolution commission and it's improvement are discussed. Abnormal reasoning for compensation standards is pointed out from a author's private view.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.12
• /
• pp.715-726
• /
• 1999

This paper estimates the capacity of shunt type active power filters(APF) for harmonic/reactive power compensation with a thyristor converter load. The base capacity requirement of APF is defined for idealized converter load current waveform and the effect of commutation overlap on the APF capacity is examined. The APF capacity required for reactive power compensation in addition to the harmonic elimination is estimated to give maximum achievable power factor for various operating condition of the partially-loaded thyristor converter. The method of current limit of APF is introduced, and it is shown that the APF capacity can be considerably reduced by deliberately limiting the peak current while maintaining the filtering performance to meet the level std 519 regulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.88-96
• /
• 1997

This paper suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteresis nonlinear element which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. A proper Lyapunov function is selected and the Lyapunov direct method is used to prove the asymptotic stability of the suggested control.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2278-2283
• /
• 2010

This paper deals with the pendubot control using disturbance observer. Experimental results for the motion of pendubot with balancing control show that the limit cycle can be attributed to the disturbance. Therefore, we propose the disturbance compensation method using by disturbance observer to compensate for the disturbance. Through the experimental results, the effectiveness of the proposed method is verified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.987-993
• /
• 1996

This report suggests a new non-linear friction compensation for digital control systems. This control adopts a hysteric nonlinear clement which can introduce the phase lead of the control system to compensate the phase delay comes from the inherent time delay of a digital control. The Lyapunov direct method is used to prove the asymtotic stability of the suggested control, and the stability and the effectiveness are verified analytically and experimentally on a single axis servo driving system.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.4
• /
• pp.73-87
• /
• 1993

As a result of accepting the '71 FUND Convention and enforcing the Oil Pollution Compensation Act 1992, we observed some benefits and costa. This paper analyses those benefits and costs and suggests se-veral key policy recommendations for the estasblishment of an effective oil pollution compensation regime in Korea. This paper identifies the said benefits and costs as follows : First, by establishing the oil pollu-tion compensation system as same as the international level, most of small and medium size of oil pollution damage which are caused by coastal tankers will be compensated by FUND. Second, most of oil pollution damage which are not covered by '69 CLC will be compensated by FUND. Third, some parts of FUND Contribution Fee and CRISTAL Contribution Fee to be charged by major oil companies will be doubled. However the limit of international oil pollution compensation system and the loophole outside the Oil Pol-lution Compensation Act 1992 suggest followings : 1) Radical risk management and insurance manage-ment of ocean going tanker owners, 2) Establishment of oil pollution claim settlement system, 3) Enforce-ment of crew and ship management for coastal tanker and 4) Establishment of Korean P & I Club.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2017

In order to maintain customer voltages within the allowable limit($220{\pm}13V$) as much as possible, tap operation strategy of SVR(Step Voltage Regulator) which is located in primary feeder, is widely used for voltage control in the utilities. However, SVR in nature has operation characteristic of the delay time ranging from 30 to 150 sec, and then the compensation of BESS (Battery Energy Storage System) during the delay time is being required because the customer voltages in distribution system may violate the allowable limit during the delay time of SVR. Furthermore, interconnection of PV(Photovoltaic) system could make a difficultly to keep customer voltage within the allowable limit. Therefore, this paper presents an optimal coordination operation algorithm between BESS and SVR based on a conventional LDC (Line Drop Compensation) method which is decided by stochastic approach. Through the modeling of SVR and BESS using the PSCAD/EMTDC, it is confirmed that customer voltages in distribution system can be maintained within the allowable limit.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.2
• /
• pp.27-51
• /
• 2007

The cumulative result of the work by the ICAO Secretariat, the Secretariat Study Group and the Council Special Group on the Modernization of the Rome Convention of 1952 are two draft Conventions, namely: "Draft Convention on Compensation for Damage Caused by Aircraft to Third Parties, in case of Unlawful Interference", and "Draft Convention on Compensation for Damage Caused by Aircraft to Third Parties" The core provisions of the former draft Convention are as follows: The liability of the operator is strict, that is, without the necessity of proof of fault. It would be liable for damage sustained by third parties on condition only that the damage was caused by an aircraft in flight(Article 3). However, such liability is caped based on the weight of the aircraft(Article 4). It is envisaged to create an independent organization called the Supplementary Compensation Mechanism, with the principle purpose to pay compensation to persons suffering damage in the territory of a State Party, and to provide financial support(Article 8). Compensation shall be paid by the SCM to the extent that the total amount of damages exceeds the Article 4 limits(Article 19). The main issues on the farmer draft Convention are relating to breaking away from Montreal Convention 1999, no limits on individual claims but a global limitation on air carrier liability, insurance coverage, cap of operators' strict liability, and Supplementary Compensation Mechanism. The core provisions of the latter draft Convention are as follows: the liability of the operator is strict, up to a certain threshold tentatively set at 250,000 to 500,000 SDRs. Beyond that, the operator is liable for all damages unless it proves that such damage were not due to its negligence or that the damages were solely due to the negligence of another person(Article 3). The provisions relating to the SCM and compensation thereunder do not operate under this Convention, as the operator is potentially for the full amount of damages caused. The main issues on the latter draft Convention are relating to liability limit of operator, and definition of general risks. In conclusion, we urge ICAO to move forward expeditiously on the draft Convention to establish a third party liability and compensation system that can stand ready to protect both third party victims and the aviation industry before another 9/11-scale event occurs.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.1
• /
• pp.97-111
• /
• 2014

As urbanization and industrialization develops, the necessity of utilizing scarce land in three dimensions is raising. The issue of utilizing underground space is being actively discussed particularly when Geyeonggi-do announced GTX(Great Train Express) construction plan which aims to relieve traffic congestion in metropolitan areas. The current regulation on compensation of underground space is based on "Regulations on compensation standard complied by using underground space for construction of urban railway" but it is difficult for covering the whole rights to protect a three-dimensional right. In this context, the study is to propose the improvement plans of land right's problem and compensation issues to utilization of underground space for the right complementary. To do this, the study reviews the use situation of the classification surface right and using adjudication which defines the effect scope of underground space extending land ownership. As well as it analyzes issues about compensation standard for utilizing of underground space.

• Journal of Environmental Science International
• /
• v.32 no.10
• /
• pp.693-701
• /
• 2023

In this study, we analyzed 82 dust damage dispute mediation cases over the past 5 years and evaluated cases where the probability of damage was verified through dust concentration measurement, modeling prediction, and chemical composition analysis. The cause of dust damage was a construction site, which accounted for most of the damage (97%), and was closely related to the distance from the construction site, total floor area of the construction site, and construction duration. Compensation was decided in only 33% of dust damage cases, and in only 6% (five cases) were damages determined using scientific techniques such as dust measurement, and forecasting. The main criteria for determining compensation were whether administrative measures were taken and evidence of damage in the form of videos and photos. In the future, measuring or model for the amount of dust damage is necessary to determine whether the limit has been exceeded and to revise the standard for calculating compensation through various lines of evidence of dust damage.