• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.34-44
• /
• 2012

This paper proposes a practical compensation method by using digital signal processing over the creep error which is representative in strain gauge loadcell. The signal compensation method carry out the simulation by deciding compensation constant (time constant) and coefficient measuring the loadcell output response. Then, compensation constant and coefficient are stored on the microprocessor. By using calculated on microprocessor creep error compensation values, weighting value is showed as a digital signal by reducing error values measured through output signals of loadcell. In addition, we apply error compensation method in order to have a dedicated software for loadcell electronic scale. This technique is useful because it has great influence on error rate reduction that has been produced by conventional electronic scales (0.03%). As a result our technique gives better accuracy (0.01%~0.003%) as what is given by digital electronic scale, while it has less complex operation processing.

• The Journal of Fisheries Business Administration
• /
• v.25 no.1
• /
• pp.1-17
• /
• 1994

Coastal economic activities usually generate externalities to other economic activities. The conflicts between coastal economic activities, especially land fillings and reclamations, and fisheries in coastal waters pose a typical one, which sometimes causes some social conflicts. In this regard, as the contents and requirements for rules and regulations on fisheries compensation may have important implications for solving such problems, important is to review rationales fur the formulas in calculating fisheries compensation. The purpose of this paper is to review the formulas for fisheries compensation from the economic view points, to highlight some problems and to suggest more appropriate formulas. It is found that the current formulas of fisheries compensation are not properly based on economic concepts and valuation techniques. Main problems are related, as followings, to the coefficient(0.8) employed in the formula, to fishermen's own wages and to current values of invested assets such as fishing boats and nets, etc.. First, it is not clear what the coefficient(0, 8) means. In Japan's case, the coefficient was assumed to reflect the opportunity cost of fishermen's own wages, but it was disappeared from the formula after the self-wage came to be included in totaling fishing cost. As our new formula will include the self-wage in fishing cost, the coefficient(0.8) should be excluded. Second, according to our formula, the current value of invested assets is added to total operating compensation, which will overestimate total compensation. Therefore, it is suggested that total present value of the assets to be invested during the business life should be deducted from total operating compensation. Third, as the self-wage will be included in total cost, opportunity cost for finding new jobs should be newly added to the formula. Finally, this paper also conducted a comparative case study considering above-mentioned factors. The case study showed that the current formulas overestimated total fisheries compensation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.139-152
• /
• 2010

This study presents graphic-user interface computer program for optimal compensation of differential column shortening with high field applicability. The implemented system can perform both relative and mixed compensation while satisfying both performance and construction constraints. In the proposed system the shape of the structure before and after compensation can be checked graphically, and the results of compensation of each stories can be printed in drawings which can be directly used as the report of column shortening. The field-applicability of the implemented system was verified by applying it to the four reinforced concrete residental buildings of 61, 42, 49 and 53 stories where compensation of differential column shortening had already been performed. Using the implemented system, compensation can be performed easily with the various constraint conditions and was able to acquire rational compensation results for the cases where conventional method was not successful.

• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.39-48
• /
• 2018

We carried out the standoff compensation data from 2007 to 2011 into four different density borehole models to find out the most effectiveness of standoff compensation charts. First, we investigated the irregular collapse characteristics of gamma ray and cut the non-ideal gamma response to improve the effectiveness of the standoff compensation error data. Effectiveness of detector combinations, density of borehole, and spine and ribs techniques from the modified standoff compensation data was analyzed. As the result of comparison, LSD-MSD combination has been suitable for standoff compensation more than LSD-SSD combination and it is possible to do standoff compensation for soil or weathered zone under groundwater level without fatal errors. Even though error scales of density transformed spine and ribs techniques were generally large compared to the conventional standoff compensation, standoff compensation for soil and weathered zone under groundwater level were sufficiently effective.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.125-132
• /
• 2018

The purpose of this study is to analyze the effect of managerial predictive accuracy on managerial performance-compensation. In this study, we compared managerial performance with managerial performance, And to analyze the relationship between manager compensation and manager compensation using managerial profit prediction accuracy. As a result of this study, there is a significant positive relationship between profit prediction accuracy and manager compensation, which can be interpreted as a result of manager's ability to compensate manager's ability to predict the future well. In this paper, we propose a new methodology that can be used to analyze the effects of managerial compensation on managerial compensation. This is because there is a difference in that it is proved to be a factor. Therefore, it is important to note that the prediction of the future of the company also identifies the additional determinants that affect manager compensation contracts with the key managerial capabilities.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.3-24
• /
• 2019

Techniques related to 360 VR service have been developed to improve the quality of the stitched image and video, where illumination compensation scheme is one of the important tools. Among the conventional illumination compensation algorithms, Gain-based compensation and Block Gain-based compensation algorithms have shown the outstanding performances in the process of making panorama picture. However, those are ineffective in the 360 VR service, because the disparity between illuminations of the multiple pictures in 360 VR is much more than that in making the panorama picture. In addition, the number of the pictures to be stitched in 360 VR system is more than that in the conventional panorama image system. Thus, we propose a preprocessing tool to enhance the illumination compensation algorithm so that the method reduces the degradation in the stitched picture of 360 VR systems. The proposed algorithm consists of 'color compensation' and 'illumination compensation'. The simulation results show that the proposed technique improve the conventional techniques without additional complexity.

• The Research Journal of the Costume Culture
• /
• v.20 no.4
• /
• pp.594-603
• /
• 2012

This study aimed to investigate a bias pattern making method with geometrical approach. The bias-cut dress has soft silhouette of drape in the garment. However, the bias cut dress has problem of satisfying the intended garment size spec. This problem occurs from various sources. The main reason is that the bias-cut fabric tends to stretch on longitudinal direction and to shrink horizontal direction when it was hung on the body. The goal of this study was to develop a bias-cut dress pattern making method satisfying the intended garment size spec. The researchers developed the geometrical method of measuring dimensional change by calculating the compensation ratio of the fabric in true bias direction. The compensation ratio was calculated by applying draping ratio of the fabric. Three types of fabrics were used in the experiment. The warp and weft crossing angle of fabric was ranged from $78^{\circ}$ to $82^{\circ}$. The fabrics stretched longitudinally 6.9~9.9% and shrank horizontally 7.2~11.0%. The compensation ratio of the bias-cut pattern for sample dress was calculated for each fabric type. Two types of experimental bias-cut dress patterns were developed for each fabric. One pattern was made with applying full compensation ratio and the other one made with applying partial ratio of the fabric. Experimental dresses were made with these patterns. The results of the evaluation showed that the bias-cut dress pattern applying the partial compensation ratio was more appropriate than the pattern applying the full compensation ratio.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.4
• /
• pp.322-332
• /
• 2013

Conventional single-phase series quasi Z-source voltage compensator can not compensate for voltage sag less than 50% that frequently occurs in the industrial field. In this study, single-phase series quasi Z-source voltage sag-swell compensator which can compensate the voltage variation of entire range is proposed. The proposed system is composed of two quasi Z-source AC-AC converters connected in series with output terminal stage. Voltage sag less than 50% could be compensated by the intersection switching control of the upper converter duty ratio and of the upper converter duty ratio. Also the compensation voltage and its flowchart for each compensation mode are presented for entire sag-swell region. To confirm the validity of the proposed system, a DSP(DSP28335) controlled experimental system was manufactured. As a result, the proposed system could compensate for the voltage sag/swell of 20% and 60%. Finally, voltage compensation factor and THD(Total Harmonic Distortion) according to voltage variation and load change were measured, and voltage quality shows a good results.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.507-512
• /
• 2013

This paper proposes a new model to compensate for errors of a five-axis machine tool. A matrix with error components, that is, an error matrix, is separated from the error synthesis model of a five-axis machine tool. Based on the kinematics and inversion of the error matrix which can be obtained not by using a numerical method, an error compensation model is established and used to calculate compensation values of joint variables. The proposed compensation model does not need numerical methods to find the compensation values from the error compensation model, which includes nonlinear equations. An experiment using a double ball-bar is implemented to verify the proposed model.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.214-219
• /
• 2001

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. In this study, the compensation device and temperature-based algorithm have been presented in order to compensate thermal error of machine tools under the real-time. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses, a designed spherical ball artifact, and five gap sensors. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.