• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.641-650
• /
• 2011

Airborne LIDAR system, utilized in various forest studies, provides efficiently spatial information about vertical structures of forest areas. The tree height is one of the most essential measurements to derive forest information such as biomass, which can be estimated from the forest terrain model. As the terrain model is generated by the interpolation of ground points extracted from LIDAR data, filtering methods with high reliability to classify reliably the ground points are required. In this paper, we applied three representative filtering methods to forest LIDAR data with diverse characteristics, measured the errors and performance of these methods, and analyzed the causes of the errors. Based on their complementary characteristics derived from the analysis results, we have attempted to combine the results and checked the performance improvement. In most test areas, the convergence method showed the satisfactory results, where the filtering performance were improved more than 10% in maximum. Also, we have generated DTM using the classified ground points and compared with the verification data. The DTM retains about 17cm RMSE, which can be sufficiently utilized for the derivation of forest information.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.119-130
• /
• 2010

In the fire and disaster prevention administration of which is not developed in comparison with any other administrative system, the systematic improvement is necessary. For system's more development, financial resource of fire service must be increased sufficiently. If fire service's budget is not allocated sufficiently, fire and disaster were not prevented effectively. This study set up hypothesis based on theoretical background and past research. In this study, dependent variables are fire service budget and police service budget per person Whereas independent variables include demand characteristics, economical characteristics, political characteristics, and previous fiscal year's budget. Statistical methods for the hypothesis's verification are regression analysis, correlation analysis and t-test. The major finding on this study are as follows: First, regression analysis showed that significant variable were past budget variable and economical variable. But political variable and demand variable were not significant except for a emergency medical variable. Second, fire service budget's average was not different significantly from police service budget's average. The above result are contingent upon the theory described in this research. A sustained research and development effort will be necessary if substantial and meaningful progress is to be made in fire service budget.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.130-137
• /
• 2018

In long freight trains, there is a brake time delay in the neighboring freight cars that causes damage and fractures of couplers, especially the knuckle of them. If there is a problem for couplers in the cars, this could cause a derailment and lead to damage of human life and property damage. In this study, maximum forces on the couplers are studied when a long freight car brakes, with brake delay time and coupler gap. We have made a dynamic model of 50 freight cars and couplers, applying contact between couplers and a characteristic curve for expressing force and displacement of buffers with SIMPACK, a multi-body dynamics program. We use EN 14531-2 from the British Standards Institution, a standard of freight car brakes for the verification of the dynamic model. We also use a simplified method to analyze the dynamic model of 50 freight cars. With changing coupler gap and brake delay time, we do comparative analysis with AAR M-201 from the Association of American Railroads, a standard of AAR couplers. From this result, we find that the standard on fatigue limit is satisfied, such that the brake delay time is within 0.06 second if the coupler gap of the AAR coupler is within 20 millimeters.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1297-1302
• /
• 2018

Propose of this study was to compared and analyzes the cranking between the newly developed hand cycle prototype and the hign-end hand cycle that are sold on the market for the disabled athletes. For this study, 10 male subjects, who had the same type of disability, were selected from the Korea Disabled Cycle Federation. 12 infrared camera(Oqus-500) was utilized to acquire the subjects' kinematic data. we have analyzed the data of 30 seconds - 15 seconds before and after cranking. SPSS 16 was used for a statistical verification and the difference of the sports biomechanical variable between RX and the prototype was verified by utilizing pared samples t-test. The significance level at the time of the experiment was ${\alpha}=.05$. The results show that there is a need to design the hand cycle crank in a curve shape to lessen the muscle fatigue that is measured the highest between the angle of 180 to 195. In addition, comparative analysis between the existing data and the data of modified crank must be researched since the hand cycle cranking is one of the main variables in performance enhancement.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.54-62
• /
• 2008

It is often believed that a more complex water quality model is better able to simulate reality. The more complex a model, however, the more parameters are involved thus increases the cost and uncertainty of modeling processes. The objective of this study was to compare the performance of two steady-state river water quality models, QUAL2E and QUAL-NIER, that have different complexity. QUAL-NIER is recently developed by National Institute of Environmental Research aiming to enhance the simulation capability of QUAL2E for eutrophic rivers. It is a carbon based model that considers different forms, such as dissolved versus particulate and labile versus refractory, of carbon and nutrients, and the contribution of autochthonous loading due to algal metabolism. The models were simultaneously applied to Nakdong River and their performance was evaluated by statistical verification with field data. Both models showed similar performance and satisfactorily replicated the longitudinal variations of BOD, T-N, T-P, Chl.a concentrations along the river. The algal blooms occurred at the stagnant reaches of downstream were also reasonably captured by the models. Although QUAL-NIER somewhat reduced the magnitude of errors, the hypothesis tests revealed no statistical evidence to justify its better performance. The contribution of autochthonous carbon and nutrient load by algal metabolism was insignificant because the hydraulic retention time is relatively short compare to the time scale of kinetic reactions. The results imply that the kinetic processes included in QUAL-NIER are too complex for the nature and scale of the real processes involved, thus needs to be optimized for improving the modeling efficiency.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.237-248
• /
• 2016

As OPB and IPB moment-induced fatigue damage on mooring chain links were reported for a offloading buoy, verification of OPB and IPB fatigue has been a key engineering item in offshore structure mooring design. Mathematical and physical features of the conventional approach which was mainly explained in BV guideline are reviewed and disadvantages of the conventional approach are addressed in terms of stress proportionality and nonlinearity of OPB and IPB moments. In order to eradicate these disadvantages, a novel approach is newly proposed which is able to dispel apprehension on stress proportionality and is not dependent of nonlinearities of OPB and IPB moments. Significant differences between two approaches are suggested by comparing relations of OPB moment versus OPB interlink angle and IPB moment versus IPB interlink angle. For periodic OPB tension angle processes having three different OPB angle ranges with a simple irregular tension process, fatigue damage calculation reveals that OPB moment-induced fatigue damage has dominant portion to total fatigue damage. Comparative studies between two approaches also show that the conventional approach based on BV guideline predicts fatigue damage far conservatively since it assume unrealistic high stress concentration factor for tension load. Meanwhile IPB moment-induced fatigue damage is negligible compared to tension-induced fatigue damage.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.4 s.22
• /
• pp.53-61
• /
• 2006

In th is paper, to predicting the large deformation and cyclic plastic behavior of steel members under loading, 3-Dimensional elastic-plastic FE analysis method is developed by using finite deformation theory and proposed cyclic plasticity model. finite deformation theory, described the large deformation, is formulated by using Updated-lagrangian formulation and Green's strain tensor, Jaumann's derivative of Kirchoff stress. Also, cyclic plasticity model proposed by author is applied to developed analysis method. To verification of developed analysis method, analysis result of steel plate specimen compare to the analysis result using infinitesimal deformation theory and test result. Also, load-displacement and deflection shape, analysis result of pipe-section steel column, compare to test result. The good agreement between analysis result and experiment result shown that developed 3-dimensional finite element analysis can be predict the large deformation and cyclic plastic behavior of steel members.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.55-61
• /
• 2011

The small-sized wind turbine generating system with the output power less than 10kW, which can be installed in some areas of hills, parks, and cities due to its flexibility, is one of the progressive research and development fields in renewable energy. It is important for the small wind turbine generators to have low cost, high reliability as well as high efficiency. To meet these requirements, development of various maximum-power-point-tracking (MPPT) control schemes should be required. Generally, the output of the controller can be connected to a 48V battery to supply power to a DC load. In this work, the design and implementation of an FPGA-based MPPT controller for small-sized wind turbine generating system is presented. For the verification of the practical performance of various MPPT algorithms, CRIO controller from NI has been used.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.1
• /
• pp.56-78
• /
• 2012

This study which is an alternative exploration for improving the quality level of instruction considering the perception of the teachers in early childhood education field on instructional design is to develop Differentiated Instructional Design Model coincides with the purpose of differentiated instruction curricula and with instructional design principles, and to find out whether the model has significant effect on development of teacher's professionalism. With these purposes, the perception of 343 teachers from early childhood education institutions are investigated, and after component variables are set by drawing the instructional design model available in early childhood education field and reviewing the literature of differentiated instruction model, the Differentiated Instructional design Model for Early Childhood are developed based on FGI(Focus Group Interview) expert evaluation. The experimental study of 88 teachers working in childcare facilities was implemented for effectiveness verification. As a result, first, most teachers consider the priority on making the lesson plans as the development of early childhood and Kindergarten Educational Subjects, and they realize the development of instructional design model which contributes on lesson planning and implementation is much needed. Second, the Differentiated Instructional design Model for Early Childhood are developed, which consists of the cyclic process - pre-lesson phase, lesson implementation phase, and assessment phase -based on development characteristics of early childhood. Third, the experiment of the developed model showed that the scores of experimental group is significantly higher than those of comparative group in knowledge and technique development aspect, and self-understanding development aspect among the aspects of development of teacher's professionalism.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.265-271
• /
• 2014

304L stainless steel sheets are used as a primary barrier for the insulation of membrane-type liquefied natural gas(LNG) carrier cargo containment system. 304L stainless steel is a transformation-induced-plasticity(TRIP) steel that exhibits complex material behavior, because it undergoes phase transformation during plastic deformation. Since the TRIP behavior is very important mechanical characteristics in a low-temperature environment, significant amounts of data are available in the literature. In the present study, a uniaxial tensile test for 304L stainless steel was performed to investigate nonlinear mechanical characteristics. In addition, a viscoplastic model and damage model is proposed to predict material fractures under arbitrary loads. The verification was conducted not only by a material-based comparative study involving experimental investigations, but also by a structural application to the LNG membrane of a Mark-III-type cargo containment system.